Burning Blanks, no error message

[bobh3615]

I am using DVD Fab 9. I am burning with a TSSTcorp CDDVDW TS-L632H, Using DVD plus blanks. DVDFab runs fine, decodes, and burns, says process complete. No error messages.
When I put the burned dvd in a player I get disc error. If I put it into laptop, autoplay asks if I want to burn to disk, so it must be blank.

Where could I be going wrong?
TIA
Bob

[90312]

look down at the bottom of the screen when you burn a movie and make sure the "Save To" box has your DVD drive in it, I think it will burn it to the documents folder by default.

[90312]

Yep by default it will save the movie to your documents folder, check it you might have a movie there.

[bobh3615]

I wish I was that lucky. It is saving to my D drive which is the burner. What do I try next.

[90312]

Posting your internal and burn logs would be the next thing, I was shooting from the hip.

[Jimbo]

burning blanks

Bob, under settings, drives, dvd write, do you have it checked to , set booktype to dvd-rom, (this setting is for +dvdr media & rw media)

[bobh3615]

Thanks Jimbo, That was not set as you suggested. I will try it and get back to you.
Thanks much.

[CBR929]

Hi bobh3615
If this does not work, you will need to post your logs as requested by my friend 90312.
CBR929

[Vader416]

I am having same issue

Except I am using 8.2.2.8, PS3, DVD, Blu ray, Laptop, computer does not recognize that anything is on the disc, but my 15 year old portable dvd player will play with lots of skipping, I have tried the above fixes, tried changing the burn from VSO to DVDFAB, same result, it thinks it is working, my laptop and desktop are both Windows 8, no aftermarket walmart purchased...VSO burn log:
2013-04-16 23:11:02 ---- ******************** Log session stop 16-Apr 23:11:02.456 PID 296********************
2013-04-16 23:04:33 Info Current Drive selected : 2:0:0 - ATAPI DVD A DH16ACSH JA11 [F] (Scsi)
2013-04-16 23:04:33 Info Using Advanced SPTI interface
2013-04-16 23:04:33 Info System default language : English (United States)
2013-04-16 23:04:33 Info User default language : English (United States)
2013-04-16 23:04:33 Info DLL Version : 4.0.21.489
2013-04-16 23:04:33 Info DLL : C:\Program Files (x86)\DVDFab 8 Qt\vso_hwe.dll
2013-04-16 23:04:33 Info Version : 8, 2, 2, 8
2013-04-16 23:04:33 Info ExeName : C:\Program Files (x86)\DVDFab 8 Qt\DVDFab.exe
2013-04-16 23:04:33 Info OS : Home Edition (Build 9200)
2013-04-16 23:04:33 ---- ******************** Log session start 16-Apr 23:04:33.641 PID 296********************


2013-04-16 23:03:59 ---- ******************** Log session stop 16-Apr 23:03:59.178 PID 4124********************
2013-04-16 23:01:03 Info Incompatible disc.
2013-04-16 23:00:31 Info Parsing disc ...
2013-04-16 23:00:15 Info WRITE SUCCESS: Disc written
2013-04-16 23:00:15 Info Finalization Time 00:00:22 - Total completion time 00:12:18
2013-04-16 22:59:53 Info Write finished in 00:11:56 - Finalization start here. Avg. burn rate 5.00
2013-04-16 22:48:28 Info Lead-in burning time (mS) 31440
2013-04-16 22:47:56 Info Write started 2202096 sectors to write
2013-04-16 22:47:56 Info Init success: DVD+R
2013-04-16 22:47:56 Info Writing speed requested x16.0, effective x16.0
2013-04-16 22:47:56 Info Available write speed: 16x
2013-04-16 22:47:56 Info Media ID: SONY-D21-00
2013-04-16 22:47:56 Info Media type: DVD+R
2013-04-16 22:47:56 Info Scanned files #28, folder #2 - total size 4508745728 b. (4.20 Gb.)
2013-04-16 22:47:56 Info Inserted media type : DVD+R
2013-04-16 22:47:56 Info Write started
2013-04-16 22:47:52 Info Writable disc DVD+R inserted. Ready to write
2013-04-16 22:33:09 Info Disc ejected by user.
2013-04-16 22:11:12 Info Disc (DVD-ROM) not empty.
2013-04-16 22:11:10 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
2013-04-16 22:11:10 Info Drive has Serial ATA physical interface
2013-04-16 22:11:10 Info New Drive selected : 2:0:0 - ATAPI DVD A DH16ACSH JA11 [F] (Scsi)
2013-04-16 22:07:54 Info Current Drive selected : 2:0:0 - ATAPI DVD A DH16ACSH JA11 [F] (Scsi)
2013-04-16 22:07:54 Info Using Advanced SPTI interface
2013-04-16 22:07:54 Info System default language : English (United States)
2013-04-16 22:07:54 Info User default language : English (United States)
2013-04-16 22:07:54 Info DLL Version : 4.0.21.489
2013-04-16 22:07:54 Info DLL : C:\Program Files (x86)\DVDFab 8 Qt\vso_hwe.dll
2013-04-16 22:07:54 Info Version : 8, 2, 2, 8
2013-04-16 22:07:54 Info ExeName : C:\Program Files (x86)\DVDFab 8 Qt\DVDFab.exe
2013-04-16 22:07:54 Info OS : Home Edition (Build 9200)
2013-04-16 22:07:54 ---- ******************** Log session start 16-Apr 22:07:54.622 PID 4124********************

[Vader416]

And here is the DVD FAB internal log

I believe this was from Django, but the issue hasn't been restricted to new movies. I am wondering if this is an issue from Windows 8, has only been since I got this new computer?

DVDFab 8.2.2.8 (2013/04/20 12:40:36)

0m 02.83s: Start preload dll...
0m 02.97s: Load dll successful.
0m 02.97s: Start load fabplay dll...
0m 03.13s: Load fabplay dll successful.
0m 03.15s: Windows os type is: 14.
0m 03.19s: Transfer settings successful.
0m 04.41s: GPUAccelerate: 455
0m 04.41s: CUDA cap: 0
0m 04.41s: Support coreavc decode: 0
0m 04.41s: Graphics info: AMD Radeon HD 7310 Graphics : :
0m 04.43s: Qt Translator file load success
0m 04.57s: Load config successful.
0m 04.86s: Init profile data driver sucessful.
0m 15.52s: Init GPU settings sucessful.
0m 15.53s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 15.55s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 16.27s: Config ExBar successful.
0m 16.28s: dvd2dvd have 8 elements.
0m 16.73s: dvd2mobile have 31 elements.
0m 19.51s: blu-ray2blu-ray have 4 elements.
0m 19.60s: blu-ray2mobile have 20 elements.
0m 21.35s: blu-ray23d have 7 elements.
0m 21.85s: blu-ray2dvd have 1 elements.
0m 21.94s: file2mobile have 30 elements.
0m 24.50s: file2dvd have 1 elements.
0m 24.58s: file2bluray have 1 elements.
0m 25.75s: Config work ui controls successful.
0m 56.44s: Init burn engine successful.
0m 56.55s: StartNotify successful.


Thanks for your time

[CBR929]

Hi Vader416
I'm guessing that the cause is either the media or your burn speed.
Please try using ImgBurn as your burn engine, you will find instructions in the link in my signature on downloading it and setting it up with Fab.

You should also set up the AWS in ImgBurn to 1/2 the rated speed of your discs, which I'm confused about your disc only says 16X try setting it to 8X

CBR929