Will not copy any newer movies.

[stoneheart]

Thank you 90312, I may have a look at that in the morning. Too tired tonight. Will use fresh eyes in the morning. Think I have ruined enough discs for one night. Night all.

[glenns]

Do you have it set here as in screen shot?.I don't make disks anymore use media player and hard drives.

[stoneheart]

Yes I have it set to 5

[glenns]

If you have it set to 5 then Fab will compress a 2 layer disk to fit on a 5.If you set it for 9 then it should copy the disk from the store brought disk over to your blank 2 layer disk.

If you use a 2 layer disk that your burner can't write to because it's a cheap disk then theirs your problem just get better 2 layer blank disks or compress it to a dvd 5 disk.

I would put it on a 2 layer disk as it will be the same as the store brought disk and look the same.Some dvd's will fit on 1 layer disks without compression then you only need a 1 layer disk to copy the disk.

[CBR929]

Hi stoneheart
You will find instructions in the link in my signature on installing ImgBurn with Fab.

Also, as previous stated, the disc your using are garbage. Sorry

If using the DL disc you will need to slow down your burn speed to half the rated speed of your disc, which is 4X, don't try burning these at 6X.

Remember to set up the AWS in ImgBurn, so every time you insert that brand of disc, it will burn at the speed you choose.
Hope this helps
CBR929

[glenns]

CBR 929:

2013-12-04 11:25:37 Info Writing speed requested x8.0, effective x8.0
2013-12-04 11:25:37 Info Available write speed: 16x ,12x ,8x ,6x
2013-12-04 11:25:37 Info Media ID: RITEKF1

If burning in Fab burner log shows 6x as slowest burn speed available.If he will try img burn he can try setting img burn settings with a slower 4x speed and adjust laser power to disk with OPC before write.With these cheap disks it may not help but it's worth trying.I would try 2x burn speed in img burn with these disks if 4x doesn't work.

[CBR929]

Hi glenns
What you posted is from the single layer disc, I was talking about the DL discs.
2013-12-04 21:59:07 Info Media type: Dual Layer DVD+R
2013-12-04 21:59:07 Info Available write speed: 8x ,6x ,4x
2013-12-04 21:59:07 Info Writing speed requested x8.0, effective x8.0
CBR929

[glenns]

CBR929 but he said the Sony disks are single layer and had no trouble with them and the log shows info Media ID: RITEKF1 So I guess the Sony's are re branded Ritek disks also.

Anyway I see log files in my sleep now i guess i am reading too many of them the last few days wait to xmas think their are a lot of new users now.....

[Wilson.Wang]

2013-12-04 11:30:48 ---- ******************** Log session stop 04-Dec 11:30:48.367 PID 6528********************
2013-12-04 11:29:56 Info Disc (DVD-R) not empty.
2013-12-04 11:29:42 Info Parsing disc ...
2013-12-04 11:28:28 Info WRITE SUCCESS: Disc written
2013-12-04 11:28:28 Info Finalization Time 00:02:10 - Total completion time 00:02:50
2013-12-04 11:26:17 Info Write finished in 00:00:39 - Finalization start here. Avg. burn rate 0.02
2013-12-04 11:25:37 Info Write started 576 sectors to write
2013-12-04 11:25:37 Info Init success: DVD-R SAO
2013-12-04 11:25:37 Info Writing speed requested x8.0, effective x8.0
2013-12-04 11:25:37 Info Available write speed: 16x ,12x ,8x ,6x
2013-12-04 11:25:37 Info Media ID: RITEKF1
2013-12-04 11:25:37 Info Media type: DVD-R
2013-12-04 11:25:37 Info DMA is not available on this bus type
2013-12-04 11:25:36 Info Scanned files #5, folder #2 - total size 69632 b. (68.00 Kb.)
2013-12-04 11:25:36 Info Inserted media type : DVD-R
2013-12-04 11:25:36 Info Write started
2013-12-04 11:25:29 Info Writable disc DVD-R inserted. Ready to write

0m 11.01s: opening drive D
0m 11.01s: opened i/o
0m 11.02s: got media type 5
0m 14.10s: got max lba 575
0m 14.10s: got disc type 10
0m 14.14s: type DVD-VIDEO
0m 14.14s: volume label STAR_TREK__INTO_DARKNESS
0m 14.22s: internal path D:/VIDEO_TS/
0m 14.23s: failed to read disc key: sensekey 00 asc 00 acsq 00
0m 14.43s: failed to read disc key: sensekey 00 asc 00 acsq 00
0m 14.64s: failed to read disc key: sensekey 00 asc 00 acsq 00
0m 14.84s: got copyright 0 0
0m 15.18s: got udf/iso
0m 15.42s: got discinfo
0m 15.43s: pathplayer enabled
0m 15.43s: no main title, turn off pathplayer
0m 15.45s: got dvdinfo
0m 15.45s: opened dvd
1m 17.25s: opening drive D
1m 17.35s: opened i/o
1m 17.36s: got media type 5
1m 17.44s: got max lba 0
1m 17.47s: opening drive E
1m 17.48s: opened i/o
1m 17.49s: got media type 4
1m 17.76s: got max lba 3952223
1m 17.78s: got disc type 10
1m 17.83s: type DVD-VIDEO
1m 17.84s: volume label STAR_TREK__INTO_DARKNESS
1m 17.86s: internal path E:/VIDEO_TS/
1m 17.98s: got copyright 1 f6
1m 18.46s: got udf/iso
1m 23.57s: got discinfo
1m 23.61s: pathplayer enabled
1m 23.76s: button: vts_2 menu_1 pgc_3 cell_1 sector_209 count_3
1m 27.77s: got dvdinfo
1m 27.77s: opened dvd
1m 41.07s: DVD Copy
1m 41.07s: Source: E:/
1m 41.07s: SourceSize: 1 MB
1m 41.07s: OutputSize: 4300 MB
1m 51.52s: burn folder C:\Users\Pam\Documents\DVDFab\Temp\FullDisc\STAR_T REK__INTO_DARKNESS\ with VSO

Cut the log files from 8229 in stoneheart's post, and not sure the burn log is V9 or V8.
Not found the log file of V9 when pathplayer enabled.

From the log file, it seems like that DVDFab does not select the correct main title when opening source "STAR_TREK__INTO_DARKNESS"

Please update to latest version V9115.
Enable pathplayer in Common setting and try again and then check the title selection in MainMovie.
Attach the source info (right click on title and select "Export source info"), purchased link and log file here if DVDFab does not read the correct main title.
Better to give us some screenshot.

Thanks!

Wilson

[stoneheart]

Sorry guys, you all speak geeklish and I am sooo lost now! I loaned the movie to a friend, so will have to try something different when it comes back. Doesn't make sense that it will only give me grief on copying the newest releases.

[vel0811]

World War Z won't copy

Hi there. I'm having the same exact problem as in the first post here. I have the most recent version of DVDFab and when I try to copy WWZ it reaches 100% in less than 3 seconds and spits out the dvd saying it was a perfect copy. Wrong. I'm not even going to waste discs trying to burn it, I just want the copy to work. Any suggestions? Many thanks!
Here is the internal log:
DVDFab 9.1.1.5 (2013/12/09 20:12:52)

0m 00.15s: Start preload dll...
0m 00.23s: Load dll successful.
0m 00.23s: Start load fabplay dll...
0m 00.34s: Load fabplay dll successful.
0m 00.34s: Transfer settings successful.
0m 00.34s: info: fabcheck logpath= C:\Users\Velvet\Documents\DVDFab9\Log\
0m 00.37s: fab_check_gpu is running ...
0m 00.53s: fab_check_gpu run successful
0m 00.54s: info: recommand= 851968, Shrink support= 1, enable= 1, cuda_cap= 0 , cpu_count= 4
0m 00.54s: GPUAccelerate: 851973
0m 00.54s: GPUAccelerate setting: 851968, 851968
0m 00.54s: CUDA cap: 0
0m 00.54s: Support coreavc decode: 0
0m 00.54s: Lighting shrink status: 1, 1
0m 00.54s: Graphics info: Intel(R) HD Graphics 4000 : :
0m 00.54s: Load config successful.
0m 00.54s: Windows os type is: 14.
0m 00.62s: Option check status: Failed
0m 00.62s: HD Decrypter-1-0-215811
0m 00.62s: DVD to DVD (Gold)-0-0-200011
0m 00.62s: DVD to DVD-0-0-200011
0m 00.62s: DVD to Mobile-0-0-200011
0m 00.62s: Blu-ray to Blu-ray-0-0-200011
0m 00.62s: Blu-ray to Mobile-0-0-200011
0m 00.62s: File to Mobile-0-0-200011
0m 00.62s: Blu-ray to DVD-0-0-200011
0m 00.62s: File to DVD-0-0-200011
0m 00.62s: File to Blu-ray-0-0-200011
0m 00.62s: File Mover-1-0-215811
0m 00.62s: Blu-ray to 3D-0-0-200011
0m 00.62s: 2D to 3D-0-0-200011
0m 00.62s: Blu-ray Decrypt-1-0-200011
0m 00.62s: DVD Decrypt-1-0-200011
0m 00.62s: Start get sys number.
0m 00.64s: Serial number is: a4-17-31-aa-a0-cc:16-17-31-aa-a0-cb:e0-db-55-d4-23-9a:a4-17-31-aa-a0-cb
0m 00.64s: Reg URL link is:
0m 00.64s: Version is: 9115
0m 00.64s: Product is: 2
0m 00.64s: Connect type is: 0
0m 02.04s: Times of connecting error is: 0
0m 02.06s: Parse string is: 2:8260762964
0m 02.06s: Parse string is: 1:25
0m 02.06s: Parse string is: OV:9115
0m 02.06s: Parse string is: BV:9112
0m 02.06s: Parse string is: S:ec79a02915ae706f8c6e03977a13d38a
0m 02.18s: Option check status: NewWork
0m 02.18s: HD Decrypter-1-0-215811
0m 02.18s: DVD to DVD (Gold)-1-0-201413
0m 02.18s: DVD to DVD-1-1-22311011
0m 02.18s: DVD to Mobile-1-0-215811
0m 02.18s: Blu-ray to Blu-ray-1-0-215811
0m 02.18s: Blu-ray to Mobile-1-0-215811
0m 02.18s: File to Mobile-1-0-215811
0m 02.18s: Blu-ray to DVD-1-0-215811
0m 02.18s: File to DVD-1-0-215811
0m 02.18s: File to Blu-ray-1-0-215811
0m 02.20s: File Mover-1-0-215811
0m 02.20s: Blu-ray to 3D-1-0-215811
0m 02.20s: 2D to 3D-1-0-215811
0m 02.20s: Blu-ray Decrypt-1-0-200011
0m 02.20s: DVD Decrypt-1-0-200011
0m 02.20s: End check info.
0m 02.20s: connect 0 : start.
0m 02.20s: Init GPU settings successful.
0m 02.20s: CommmandLine:
0m 03.34s: Begin init preview play engine.
0m 03.36s: Init DirectShow engine successful.
0m 03.39s: Profile Manager :: End Load Profile
0m 03.73s: Burn engine: start init.
0m 06.76s: connect 0 : 1:1-10:1-11:1-12:1-13:1-14:1-15:1-
0m 06.83s: Burn engine: type-0.
0m 06.83s: Burn engine: 0- D:\ [HL-DT-ST DVD+-RW GU70N A102 (Scsi)].
0m 06.83s: Burn engine: 1- E:\ [HL-DT-ST DVD+-RW GX10N A106 (Usb)].
0m 06.83s: Burn engine: end init.
0m 07.51s: Init setting page successful.
0m 08.46s: Init driveX with I/O mode: 0
0m 08.46s: Init driveX with I/O mode: 0
0m 08.46s: Init driveX with I/O mode: 0
0m 08.47s: opening drive E
0m 08.47s: opened i/o
0m 08.47s: got media type 4
0m 11.15s: got max lba 3951183
0m 11.17s: got disc type 10
0m 11.25s: type DVD-VIDEO
0m 11.25s: volume label WORLD_WAR_Z
0m 11.26s: opening drive G
0m 11.26s: opened i/o
0m 11.58s: got max lba 342015
0m 11.66s: got disc type 0
0m 11.67s: opening drive D
0m 11.67s: opened i/o
0m 43.02s: Open blu-ray disc expired time: 215811
0m 43.03s: opening drive E
0m 43.03s: opened i/o
0m 45.60s: got max lba 3951183
0m 45.62s: got disc type 10
0m 45.71s: internal path E:/VIDEO_TS/
0m 45.75s: got copyright 1 f6
0m 46.63s: got udf/iso
0m 54.23s: got discinfo
0m 54.28s: pathplayer enabled
0m 55.50s: got dvdinfo
0m 55.63s: opened dvd
1m 22.36s: UILog:OnMsgToolbar_Start
1m 22.37s: UILog:Msg Start : ready start
1m 22.37s: UILog:Msg Start : start test run work
1m 22.37s: UILog:right button to null, work falg = -1
1m 22.38s: UILog:Msg Start : run work
1m 22.38s: UILog:Run current Work.
1m 22.38s: UILog:Begin work copy or converter.
1m 22.38s: UILog:start running at thread.
1m 22.39s: UILog:return flag at start running at thread ok.
1m 22.50s: UILog:MsgWork:WorkStatus_Start
1m 22.55s: DVD Copy
1m 22.55s: Source: E:/
1m 22.55s: SourceSize: 1 MB
1m 22.55s: OutputSize: 4300 MB
1m 30.34s: UILog:MsgWork:current work finish : 3
1m 30.35s: UILog:Run Work to end.

and here is the burn log:
2013-12-09 20:11:52 ---- ******************** Log session stop 09-Dec 20:11:52.027 PID 860********************
2013-12-09 20:07:06 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
2013-12-09 20:07:06 Info Drive has Serial ATA physical interface
2013-12-09 20:07:06 Info New Drive selected : 0:0:0 - HL-DT-ST DVD+-RW GX10N A106 [E] (Usb)
2013-12-09 20:07:06 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
2013-12-09 20:07:06 Info Drive has Serial ATA physical interface
2013-12-09 20:07:06 Info New Drive selected : 0:0:0 - HL-DT-ST DVD+-RW GU70N A102 [D] (Scsi)
2013-12-09 20:07:05 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
2013-12-09 20:07:05 Info Drive has Serial ATA physical interface
2013-12-09 20:07:05 Info New Drive selected : 0:0:0 - HL-DT-ST DVD+-RW GX10N A106 [E] (Usb)
2013-12-09 20:07:05 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
2013-12-09 20:07:05 Info Drive has Serial ATA physical interface
2013-12-09 20:07:05 Info New Drive selected : 0:0:0 - HL-DT-ST DVD+-RW GU70N A102 [D] (Scsi)
2013-12-09 20:07:05 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
2013-12-09 20:07:05 Info Drive has Serial ATA physical interface
2013-12-09 20:07:05 Info New Drive selected : 0:0:0 - HL-DT-ST DVD+-RW GX10N A106 [E] (Usb)
2013-12-09 20:07:05 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
2013-12-09 20:07:05 Info Drive has Serial ATA physical interface
2013-12-09 20:07:05 Info New Drive selected : 0:0:0 - HL-DT-ST DVD+-RW GU70N A102 [D] (Scsi)
2013-12-09 20:07:05 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
2013-12-09 20:07:05 Info Drive has Serial ATA physical interface
2013-12-09 20:07:05 Info New Drive selected : 0:0:0 - HL-DT-ST DVD+-RW GX10N A106 [E] (Usb)
2013-12-09 20:06:49 Info Current Drive selected : 0:0:0 - HL-DT-ST DVD+-RW GU70N A102 [D] (Scsi)
2013-12-09 20:06:49 Info Using Advanced SPTI interface
2013-12-09 20:06:49 Info System default language : English (United States)
2013-12-09 20:06:49 Info User default language : English (United States)
2013-12-09 20:06:49 Info DLL Version : 4.0.21.489
2013-12-09 20:06:49 Info DLL : C:\Program Files (x86)\DVDFab 9\vso_hwe.dll
2013-12-09 20:06:49 Info Version : 9, 1, 1, 1
2013-12-09 20:06:49 Info ExeName : C:\Program Files (x86)\DVDFab 9\DVDFab.exe
2013-12-09 20:06:49 Info OS : Home Edition (Build 9200)
2013-12-09 20:06:49 ---- ******************** Log session start 09-Dec 20:06:49.956 PID 860********************

[vel0811]

Second attempt at World War Z

I tried WWZ again, this time with main movie instead of full disk. I got an error this time that said process failed. Here is the internal log:

DVDFab 9.1.1.1 (2013/12/04 14:51:45)

0m 02.37s: Transfer settings successful.
0m 02.39s: warning: FabPlay: invalid gpu detect handle
0m 02.39s: GPUAccelerate: 0
0m 02.39s: GPUAccelerate setting: 0, 0
0m 02.39s: CUDA cap: 0
0m 02.39s: Support coreavc decode: 0
0m 02.39s: Lighting shrink status: 0, 0
0m 02.39s: Graphics info: : :
0m 02.42s: Load config successful.
0m 02.42s: Windows os type is: 14.
0m 04.69s: Profile Manager :: End Load Profile

This is the error log:

22:25:49
Task_1 failed! Error=700

Any help is greatly appreciated.

[vel0811]

WWZ again

BTW, I wanted to mention that this is the second disk of World War Z I've tried, neither will copy and both original disks were in good shape (not scratched etc).

Thanks for any help you can offer.

[vel0811]

Anyone? I want to give this disc back but I'd like to be able to copy it first. Thanks!

[90312]

You need to read this: and explain giving it back?