Burning DL DvD problem

[krue1free]

I am an complete newb when it comes to this software. When doing the dvd to dvd option or clone dvd option. The ripping works just fine but when it comes time to burn I get an error message like "burn fail" retry. I hit retry and it just kinda of sits there with the little blue bar going side to side.
Here is the log from my attempts. also here is the name of my cd drive.
(sony dvd +-RW DW-Q58A). Any suggestions or insight will be helpful.

2010-08-14 01:24:13 ---- ******************** Log session stop 14-Aug 01:24:13.127 PID 5464********************
2010-08-14 01:20:48 Info Disc (DVD-ROM) not emtpy.
2010-08-14 01:20:34 Info Parsing disc ...
2010-08-14 01:20:06 Info Disc ejected by user.
2010-08-14 01:03:26 Info Writable disc DL DVD+R inserted. Ready to write
2010-08-14 01:03:04 Info Parsing disc ...
2010-08-14 01:02:58 Info No disc in drive.
2010-08-14 01:02:53 Error INIT ERROR: Writing device initialization failed - sense: Code 05 27 00 [Illegal request, CD is write protected]
2010-08-14 01:02:53 Error Init DVD+R Dual Layer: Write cancelled, Your media is still usable.
2010-08-14 01:02:53 Error Init DVD+R Dual Layer: Failed to set layer change to LBA 2052608 (3.92 Gb.) - Code 05 27 00 [Illegal request, CD is write protected]
2010-08-14 01:02:53 Info Writing speed requested x2.4, effective x2.4
2010-08-14 01:02:53 Info Layer break set by user at sector 2052608
2010-08-14 01:02:53 Info Available write speed: 2.4x
2010-08-14 01:02:53 Info Media ID: RITEK-S04-42
2010-08-14 01:02:53 Info Media type: Dual Layer DVD+R
2010-08-14 01:02:53 Info DMA Mode
2010-08-14 01:02:53 Info Write started
2010-08-14 01:02:49 Info Writable disc DL DVD+R inserted. Ready to write
2010-08-14 01:02:28 Info Parsing disc ...
2010-08-14 01:01:26 Info No disc in drive.
2010-08-14 00:37:52 Info Disc (DVD-ROM) not emtpy.
2010-08-14 00:37:50 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R
2010-08-14 00:37:50 Info Drive has unknown physical interface
2010-08-14 00:37:50 Info New Drive selected : 1:0:0 - SONY DVD+-RW DW-Q58A UDS2 [D] (Ide)
2010-08-14 00:37:09 Info Current Drive selected : 1:0:0 - SONY DVD+-RW DW-Q58A UDS2 [D] (Ide)
2010-08-14 00:37:09 Info Using Advanced SPTI interface
2010-08-14 00:37:09 Info System default language : English (United States)
2010-08-14 00:37:09 Info User default language : English (United States)
2010-08-14 00:37:09 Info DLL Version : 4.0.11.473
2010-08-14 00:37:09 Info DLL : C:\Program Files\DVDFab 7\vso_hwe.dll
2010-08-14 00:37:09 Info Version : 7, 0, 9, 3
2010-08-14 00:37:09 Info ExeName : C:\Program Files\DVDFab 7\DVDFab.exe
2010-08-14 00:37:09 Info OS : Microsoft Windows XP MCE 2005 (Build 2600: Service Pack 3)
2010-08-14 00:37:09 ---- ******************** Log session start 14-Aug 00:37:09.549 PID 5464********************


2010-08-14 00:33:33 ---- ******************** Log session stop 14-Aug 00:33:33.205 PID 4840********************
2010-08-14 00:32:30 Info Writable disc DL DVD+R inserted. Ready to write
2010-08-14 00:30:24 Info Writable disc DL DVD+R inserted. Ready to write
2010-08-14 00:29:02 Error INIT ERROR: Writing device initialization failed - sense: Code 05 27 00 [Illegal request, CD is write protected]
2010-08-14 00:29:02 Error Init DVD+R Dual Layer: Write cancelled, Your media is still usable.
2010-08-14 00:29:02 Error Init DVD+R Dual Layer: Failed to set layer change to LBA 2051312 (3.91 Gb.) - Code 05 27 00 [Illegal request, CD is write protected]
2010-08-14 00:29:02 Info Writing speed requested x2.4, effective x2.4
2010-08-14 00:29:02 Info layer break set by filesystem builder at 0
2010-08-14 00:29:01 Info Available write speed: 2.4x
2010-08-14 00:29:01 Info Media ID: RITEK-S04-42
2010-08-14 00:29:01 Info Media type: Dual Layer DVD+R
2010-08-14 00:29:01 Info DMA Mode
2010-08-14 00:29:01 Info Scanned files #29, folder #2 - total size 8401002496 b. (7.82 Gb.)
2010-08-14 00:29:01 Info Inserted media type : DL DVD+R
2010-08-14 00:29:01 Info Write started
2010-08-14 00:28:55 Info Writable disc DL DVD+R inserted. Ready to write
2010-08-14 00:28:53 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R
2010-08-14 00:28:53 Info Drive has unknown physical interface
2010-08-14 00:28:53 Info New Drive selected : 1:0:0 - SONY DVD+-RW DW-Q58A UDS2 [D] (Ide)
2010-08-14 00:26:19 Info Current Drive selected : 1:0:0 - SONY DVD+-RW DW-Q58A UDS2 [D] (Ide)
2010-08-14 00:26:19 Info Using Advanced SPTI interface
2010-08-14 00:26:19 Info System default language : English (United States)
2010-08-14 00:26:19 Info User default language : English (United States)
2010-08-14 00:26:19 Info DLL Version : 4.0.11.473
2010-08-14 00:26:19 Info DLL : C:\Program Files\DVDFab 7\vso_hwe.dll
2010-08-14 00:26:19 Info Version : 7, 0, 9, 3
2010-08-14 00:26:19 Info ExeName : C:\Program Files\DVDFab 7\DVDFab.exe
2010-08-14 00:26:19 Info OS : Microsoft Windows XP MCE 2005 (Build 2600: Service Pack 3)
2010-08-14 00:26:19 ---- ******************** Log session start 14-Aug 00:26:19.127 PID 4840********************

[crackinhedz]

use Imgburn as your burning app

[krue1free]

which file do I burn? or is it a folder? sorry I am new at this.

[CBR929]

krue1free
A few obstacles you are going to have to over come
1) 2010-08-14 01:02:53 Info Media ID: RITEK-S04-42 the media you are using is crap sorry. Consider picking up some +R DL Verbatims
2)Try installing ImgBurn you will find it here it is (Free) along with a tutorial on how to set it up with Fab
3) Your drive has a firmware update but, we will skip that for now.
4) This was pulled from your logs
2010-08-14 00:37:50 Info Drive has unknown physical interface I have not seen this before maybe some one will chime in on this.
CBR929

[krue1free]

Hey thanks a alot for the help so far I will try the following any chance of getting the media I do have to work? Is there any hope at all

[krue1free]

Will the memorex dl dvd's work with this program?

[GregiBoy]

The only chance that you really have is to use ImgBurn at a slow speed and still then, nothing then is guaranteed with crap media.

[krue1free]

What makes the difference in quality in media any one know? All the media looks the same to me.

[GregiBoy]

The manufacture & quality control.

[CBR929]

The only chance that you really have is to use ImgBurn at a slow speed and still then, nothing then is guaranteed with crap media.

GregiBoy is absolutely correct as usual

GregiBoy do you know what No.4 means in my post 4?

krue1free
Here is a site you can read through to learn about blank media
CBR929

[GregiBoy]

No I do not. Haven't seen that before....

[krue1free]

So what do you know, I bought a pack of verbatim DVD+Dl and the burn seems to be working. Hard to believe.

[90312]

That's not hard to believe at all.

[CBR929]

So what do you know, I bought a pack of verbatim DVD+Dl and the burn seems to be working. Hard to believe.

Glad your burning again
CBR929