help dvd freezing up

[wildbill38]

I have dvdfab 7.0.9.3 and the last couple of DVD,s I have copied. when I watch them the DVD will freeze up where I can not even fast forward through it or it will stop and go until it freeze totally. can any one help me with the problem.

[AGJ]

I have dvdfab 7.0.9.3 and the last couple of DVD,s I have copied. when I watch them the DVD will freeze up where I can not even fast forward through it or it will stop and go until it freeze totally. can any one help me with the problem.

Update to the latest released version! Give a try and if same problem with that one then read this link below and post all info mentioned to your next post reply to this thread

[stealthrtt]

or try this.change your speed burning to 2 x... all time i use verbatim dvds, and blu rays,,. to 2x write.i reomended this option.

[Racem22]

Burning blu-rays at 2x would probably be fine, but it's usually not a good idea to burn 8x-16x dvds in a new burner at 2x. I've heard issues that actually burning too slow will affect the quality of the backup the same as burning too fast. Half the rated speed of the disc will usually be fine. Setting dvds at a 2x burn speed is like going back to the year 2000, you don't really need to do that anymore.

[maineman]

Burning blu-rays at 2x would probably be fine, but it's usually not a good idea to burn 8x-16x dvds in a new burner at 2x. I've heard issues that actually burning too slow will affect the quality of the backup the same as burning too fast. Half the rated speed of the disc will usually be fine. Setting dvds at a 2x burn speed is like going back to the year 2000, you don't really need to do that anymore.

Excellent advice, couldn't agree more.
Please post the pertinent logs, particularly the burn log from 1-2 of these bkups.

The default location is:

For Win7
C:\Users\User Name\My Documents\DVDFab\Log
or for XP
C:\Documents and Settings\User Name\My Documents\DVDFab\Log

[wildbill38]

still Freezing

Hello again I installed dvdfab 8.0.2.2 and I am still getting the problem of freezing up during the movie after I have copied it. let me explain a little bit better. I open my dvd fab 8022 and copy the movie once dvd fab has copied and burned the movie to disc I the put the copied movie into my dvd player and start to watch the movie I get about to the middle of the movie and the movie freezes up the only way to get out of it is to stop the movie no matter what I do I can not get past the part of where the movie frooze up. please help with a solution and exactly how to go about fixing it since I am some what a computer idiot.

[Guest]

Look in your Documents and Setting for the DVDFab logs folder and post the logs.

Without more information / details it is a guessing game.

[wildbill38]

freezing up

I have tryed to upload the log files but I keep getting the message that the exceeds the forums limit of 19.5 kb.

[maineman]

Don't try to "upload" the entire contents, just the logs from 1 or 2 flicks.
In particular, we need the burn logs.
Just copy and paste.

[wildbill38]

freezing up

I hope this is what you are looking for.
2010-10-07 18:04:44 ---- ******************** Log session stop 07-Oct 18:04:44.983 PID 5436********************
2010-10-07 18:04:28 Info Current Drive selected : 0:1:0 - SONY CDRWDVD CRX310S VDK2 [D] (Ide)
2010-10-07 18:04:28 Info Using Advanced SPTI interface
2010-10-07 18:04:28 Info System default language : English (United States)
2010-10-07 18:04:28 Info User default language : English (United States)
2010-10-07 18:04:28 Info DLL Version : 4.0.11.473
2010-10-07 18:04:28 Info DLL : C:\Program Files\DVDFab 8\vso_hwe.dll
2010-10-07 18:04:28 Info Version : 8, 0, 2, 2
2010-10-07 18:04:28 Info ExeName : C:\Program Files\DVDFab 8\DVDFab.exe
2010-10-07 18:04:28 Info OS : Microsoft Windows XP MCE 2005 (Build 2600: Service Pack 3)
2010-10-07 18:04:28 ---- ******************** Log session start 07-Oct 18:04:28.108 PID 5436********************


2010-10-07 18:03:39 ---- ******************** Log session stop 07-Oct 18:03:39.827 PID 4128********************
2010-10-07 17:10:14 Info Writable disc DL DVD+R inserted. Ready to write
2010-10-07 17:10:12 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
2010-10-07 17:10:12 Info Drive has IDE-ATAPI physical interface
2010-10-07 17:10:12 Info New Drive selected : 0:2:0 - TSSTcorp DVD+-RW TS-H553A DE04 [E] (Ide)
2010-10-07 17:09:22 Info Current Drive selected : 0:1:0 - SONY CDRWDVD CRX310S VDK2 [D] (Ide)
2010-10-07 17:09:22 Info Using Advanced SPTI interface
2010-10-07 17:09:22 Info System default language : English (United States)
2010-10-07 17:09:22 Info User default language : English (United States)
2010-10-07 17:09:22 Info DLL Version : 4.0.11.473
2010-10-07 17:09:22 Info DLL : C:\Program Files\DVDFab 8\vso_hwe.dll
2010-10-07 17:09:22 Info Version : 8, 0, 2, 2
2010-10-07 17:09:22 Info ExeName : C:\Program Files\DVDFab 8\DVDFab.exe
2010-10-07 17:09:22 Info OS : Microsoft Windows XP MCE 2005 (Build 2600: Service Pack 3)
2010-10-07 17:09:22 ---- ******************** Log session start 07-Oct 17:09:22.327 PID 4128********************

[maineman]

Well, you're getting there...

We need the burn log...that portion of the log that displays data about the actual burn process.
It will have your burner make/model & firmware, the media ID (MID), selected and actual burn speeds, errors encountered...well, you get the idea

[wildbill38]

freezing up

here is three more times I copied movies and when I watched them after copying them they would freeze up through the movie.

2010-10-02 20:37:10 ---- ******************** Log session stop 02-Oct 20:37:10.400 PID 2772********************
2010-10-02 20:36:28 Info Disc ejected by user while parsing.
2010-10-02 20:36:26 Info Parsing disc ...
2010-10-02 20:33:06 Info WRITE SUCCESS: Disc written
2010-10-02 20:33:06 Info Finalization Time 00:00:59 - Total completion time 00:18:31
2010-10-02 20:32:06 Info Write finished in 00:17:31 - Finalization start here. Avg. burn rate 6.18
2010-10-02 20:14:37 Info Lead-in burning time (mS) 1912
2010-10-02 20:14:35 Info Write started 3994096 sectors to write
2010-10-02 20:14:35 Info Init success: DVD+R Dual Layer
2010-10-02 20:14:35 Info Init DVD+R Dual Layer: Layer change set to LBA 1997056 (3.81 Gb.)
2010-10-02 20:13:54 Info Writing speed requested x8.0, effective x8.0
2010-10-02 20:13:51 Info layer break set by filesystem builder at 0
2010-10-02 20:13:51 Info Available write speed: 8x ,6x ,4x ,2.4x
2010-10-02 20:13:51 Info Media ID: RICOHJPN-D01-43
2010-10-02 20:13:51 Info Media type: Dual Layer DVD+R
2010-10-02 20:13:51 Info PIO Mode
2010-10-02 20:13:50 Info Scanned files #17, folder #2 - total size 8178774016 b. (7.62 Gb.)
2010-10-02 20:13:50 Info Inserted media type : DL DVD+R
2010-10-02 20:13:50 Info Write started
2010-10-02 19:57:01 Info Writable disc DL DVD+R inserted. Ready to write
2010-10-02 19:56:01 Info Writable disc DL DVD+R inserted. Ready to write
2010-10-02 19:55:41 Info Parsing disc ...
2010-10-02 19:51:57 Info WRITE SUCCESS: Disc written
2010-10-02 19:51:57 Info Finalization Time 00:00:58 - Total completion time 00:12:36
2010-10-02 19:50:59 Info Write finished in 00:11:37 - Finalization start here. Avg. burn rate 5.04
2010-10-02 19:39:23 Info Lead-in burning time (mS) 1888
2010-10-02 19:39:21 Info Write started 2165200 sectors to write
2010-10-02 19:39:21 Info Init success: DVD+R Dual Layer
2010-10-02 19:39:21 Info Init DVD+R Dual Layer: Layer change set to LBA 1082608 (2.06 Gb.)
2010-10-02 19:38:32 Info Writing speed requested x8.0, effective x8.0
2010-10-02 19:38:32 Info layer break set by filesystem builder at 0
2010-10-02 19:38:32 Info Available write speed: 8x ,6x ,4x ,2.4x
2010-10-02 19:38:32 Info Media ID: RICOHJPN-D01-43
2010-10-02 19:38:32 Info Media type: Dual Layer DVD+R
2010-10-02 19:38:32 Info PIO Mode
2010-10-02 19:38:32 Info Scanned files #30, folder #2 - total size 4433160192 b. (4.13 Gb.)
2010-10-02 19:38:32 Info Inserted media type : DL DVD+R
2010-10-02 19:38:32 Info Write started
2010-10-02 19:33:16 Info Writable disc DL DVD+R inserted. Ready to write
2010-10-02 19:33:14 Info Parsing disc ...
2010-10-02 19:32:54 Info Parsing disc ...
2010-10-02 19:31:25 Info No disc in drive.
2010-10-02 19:00:45 Info WRITE SUCCESS: Disc written
2010-10-02 19:00:45 Info Finalization Time 00:00:59 - Total completion time 00:16:23
2010-10-02 18:59:45 Info Write finished in 00:15:23 - Finalization start here. Avg. burn rate 5.83
2010-10-02 18:44:24 Info Lead-in burning time (mS) 1915
2010-10-02 18:44:22 Info Write started 3315184 sectors to write
2010-10-02 18:44:22 Info Init success: DVD+R Dual Layer
2010-10-02 18:44:22 Info Init DVD+R Dual Layer: Layer change set to LBA 1657600 (3.16 Gb.)
2010-10-02 18:43:43 Info Writing speed requested x8.0, effective x8.0
2010-10-02 18:43:40 Info layer break set by filesystem builder at 0
2010-10-02 18:43:40 Info Available write speed: 8x ,6x ,4x ,2.4x
2010-10-02 18:43:40 Info Media ID: RICOHJPN-D01-43
2010-10-02 18:43:40 Info Media type: Dual Layer DVD+R
2010-10-02 18:43:40 Info PIO Mode
2010-10-02 18:43:40 Info Scanned files #46, folder #2 - total size 6788300800 b. (6.32 Gb.)
2010-10-02 18:43:40 Info Inserted media type : DL DVD+R
2010-10-02 18:43:40 Info Write started
2010-10-02 18:30:10 Info Writable disc DL DVD+R inserted. Ready to write
2010-10-02 18:30:08 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
2010-10-02 18:30:08 Info Drive has IDE-ATAPI physical interface
2010-10-02 18:30:08 Info New Drive selected : 0:2:0 - TSSTcorp DVD+-RW TS-H553A DE04 [E] (Ide)
2010-10-02 18:28:10 Info Current Drive selected : 0:1:0 - SONY CDRWDVD CRX310S VDK2 [D] (Ide)
2010-10-02 18:28:10 Info Using Advanced SPTI interface
2010-10-02 18:28:10 Info System default language : English (United States)
2010-10-02 18:28:10 Info User default language : English (United States)
2010-10-02 18:28:10 Info DLL Version : 4.0.11.473
2010-10-02 18:28:10 Info DLL : C:\Program Files\DVDFab 7\vso_hwe.dll
2010-10-02 18:28:10 Info Version : 7, 0, 9, 3
2010-10-02 18:28:10 Info ExeName : C:\Program Files\DVDFab 7\DVDFab.exe
2010-10-02 18:28:10 Info OS : Microsoft Windows XP MCE 2005 (Build 2600: Service Pack 3)
2010-10-02 18:28:10 ---- ******************** Log session start 02-Oct 18:28:10.962 PID 2772********************

[wildbill38]

freezing up

was my last thread what you were asking for. if not tell me exactly where to go and how to get there.

[Guest]

If you google the media you are using you will find many derogatory remarks regarding the quality or rather the lack of quality .
In other words you need a better DL media.

You are also burning at max speed slow it down to 4X for this media.

[maineman]

As my good friend Gruñón advised, both your media and your burn speed are big problems.
You have other major hurdles...for one, your drive is in PIO mode.

1. You need to get your drive in UDMA mode
Click on the Reset DMA tab in Fab.
This probably will work. It's a quick and easy first step, but it doesn't always stick.
If not, there's always plan b...c...

2. Switch burn engines to Img. Even though the Ritek D01 media is crap and I agree wholeheartedly with Gruñón about switching media,
you have a better chance burning the D01's with Img.

Please click on the link in my sig on how to set up Img and Fab.
The link includes an excellent video tutorial.

3. Burn at 4X...maybe even 2.4X.

Post back with another burn log and let us know.

BTW, the only DL media we recommend is Verbatim +R DL, MIS (made in Singapore). You'll have to look on the spindle wrapper for the manufacturer's locale.
Both the 2.4X-4X media (MKM 001) and the 8X media (MKM 003) are superb.

//Edit
The Verbatim +R DL dvds made in India (MII) are still better than what you've got...