DVD Ripper avi xvid audiocopy failures on a computer w/an i7 processor

[jdigital]

I'm going to start posting logs of all the dvds that cause a failure on my i7. This i7 has 8GB ram and is running Windows 7 64-bit. For those who have been reading my threads, my core2duo running Windows 7 64-bit does not suffer from this issue.

I'm having to cancel out of these b/c they stall out on 0-51% on the second pass...sometimes Windows will tell me FabCore has crashed.

This is trying a 2-pass generic->avi (xvid+audiocopy). Highest frame res that's showed. Audio and frame rate are set to same as source, no split, forced subtitles is checked w/direct render to video.

[jdigital]

dvdfab_internal


DVDFab 8.0.6.6 (2010/12/31 05:01:25)

0m 00.54s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 01.46s: detected dvd
0m 01.51s: drive D
0m 01.51s: dvd type 1
0m 01.51s: volume label FERNLOTH
0m 01.65s: got copyright 1 fe
0m 01.95s: got udf/iso
0m 02.49s: got discinfo
0m 02.49s: pathplayer enabled
0m 26.58s: got dvdinfo
0m 26.73s: opened dvd
1m 10.10s:


------ begin mobile work(1/1) ------


1m 10.10s: create config(0)
1m 10.10s: convert profile(generic.avi.xvid.audiocopy)
1m 10.34s: dvd title(1) angle(0) chapter(1->31)
1m 10.34s: stream(480,2,1) stream(128,86019,0) stream(32,94208,4)
1m 10.35s: info: set output video frame_rate(24000/1001)
1m 10.35s: subpicture preset(1), mode(0)
1m 14.50s: subpicture(32) mode(0)
1m 14.50s: connect to sub render filter
17m 40.04s: subpicture(32) mode(0)
17m 40.04s: connect to sub render filter
98m 26.02s: ------ cancel all mobile work -------


dvdfab_burn_vso

2010-12-31 06:40:02 ---- ******************** Log session stop 31-Dec 06:40:02.488 PID 11348********************
2010-12-31 05:01:26 Info Current Drive selected : 0:1:0 - HL-DT-ST DVD+-RW GH50N B103 [D] (Ide)
2010-12-31 05:01:26 Info Using Advanced SPTI interface
2010-12-31 05:01:26 Info System default language : English (United States)
2010-12-31 05:01:26 Info User default language : English (United States)
2010-12-31 05:01:26 Info DLL Version : 4.0.13.476
2010-12-31 05:01:26 Info DLL : C:\Program Files (x86)\DVDFab 8\vso_hwe.dll
2010-12-31 05:01:26 Info Version : 8, 0, 6, 6
2010-12-31 05:01:26 Info ExeName : C:\Program Files (x86)\DVDFab 8\DVDFab.exe
2010-12-31 05:01:26 Info OS : Microsoft Windows XP MCE (Build 2600: Service Pack 2)
2010-12-31 05:01:26 ---- ******************** Log session start 31-Dec 05:01:26.446 PID 11348********************

[jdigital]

dvdfab_internal



DVDFab 8.0.6.6 (2011/01/01 00:54:11)

0m 00.60s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 13.05s: detected dvd
0m 13.08s: drive D
0m 13.10s: dvd type 1
0m 13.10s: volume label MAVERICK_16X9LB
0m 13.22s: got copyright 1 fe
0m 13.54s: got udf/iso
0m 14.32s: got discinfo
0m 14.32s: pathplayer enabled
0m 41.52s: got dvdinfo
0m 41.65s: opened dvd
1m 40.90s:


------ begin mobile work(1/1) ------


1m 40.90s: create config(0)
1m 40.90s: convert profile(generic.avi.xvid.audiocopy)
1m 41.10s: dvd title(1) angle(0) chapter(1->42)
1m 41.10s: stream(480,2,1) stream(128,86019,0) stream(32,94208,4)
1m 41.12s: info: set output video frame_rate(24000/1001)
1m 41.12s: subpicture preset(1), mode(0)
1m 45.25s: subpicture(32) mode(0)
1m 45.25s: connect to sub render filter
17m 35.17s: subpicture(32) mode(0)
17m 35.17s: connect to sub render filter
21m 22.79s: ------ cancel all mobile work -------


I don't guess the dvdfab_burn_vso is worth posting everytime.

[jdigital]

Are those two logs enough? They seem really similar. I can post another 10 or so that I know will fail if I retry them. I still have quite a bit to go on converting my collection, so there shouldn't be a lack of information. Let me know what else you guys need.

[jdigital]

I was going to show that they stall out at 1-pass as well even though they make it through the first pass when 2-pass is selected, but it appears this dvd is going to make it through a single pass. I suspect that means with enough attempts it will make it through a 2-pass? I just don't know how many it will take. I have a stack here that seems to fail over & over and the ones that succeed don't seem to fail during any attempt. I've redone some of them b/c I forgot to check forced subtitles or the correct resolution wasn't available.

[jdigital]

Just reached the 60% mark!

[jdigital]

Well if this is a sign of what is possible on my failure stack, it appears w/enough attempts a successful rip is possible. Log below...anything else I can provide?

45m 35.29s:


------ begin mobile work(1/1) ------


45m 35.29s: create config(0)
45m 35.29s: convert profile(generic.avi.xvid.audiocopy)
45m 35.29s: dvd title(1) angle(0) chapter(1->42)
45m 35.29s: stream(480,2,1) stream(128,86019,0) stream(32,94208,4)
45m 35.30s: info: set output video frame_rate(24000/1001)
45m 35.30s: subpicture preset(1), mode(0)
45m 39.51s: subpicture(32) mode(0)
45m 39.51s: connect to sub render filter
60m 53.34s: subpicture(32) mode(0)
60m 53.34s: connect to sub render filter
82m 24.99s:


------ finish mobile work ------

[jdigital]

Switching all the codec to software, disabling turbo cpu usage, disabling the path player didn't help.

[jdigital]

This brute force tactic of hoping multiple attempts would push through a success isn't working. The same dvd has failed 5 times at the exact same point.

[jdigital]

So in another thread I questioned whether my video card could affect the outcome and according to this http://forum.dvdfab.com/showthread.php?t=10800 it seems like it is possible; although switching the codec to software didn't help. I have an ATI Radeon HD 5700 Series according to my device manager...something makes me think it's an HD 5750.

[jdigital]

Tried to move onto another dvd and got another failure...so depressing.



DVDFab 8.0.6.6 (2011/01/01 10:57:00)

0m 00.54s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 01.35s: detected dvd
0m 01.38s: drive D
0m 01.38s: dvd type 1
0m 01.38s: volume label IRON_MAN_2_D1
0m 01.52s: got copyright 1 f6
0m 01.84s: got udf/iso
0m 05.60s: got discinfo
0m 05.61s: pathplayer enabled
0m 23.65s: got dvdinfo
0m 23.77s: opened dvd
2m 02.92s:


------ begin mobile work(1/1) ------


2m 02.92s: create config(0)
2m 02.92s: convert profile(generic.avi.xvid.audiocopy)
2m 04.44s: dvd title(29) angle(0) chapter(1->18)
2m 04.44s: stream(480,2,1) stream(128,86019,0) stream(32,94208,4)
2m 04.45s: info: set output video frame_rate(24000/1001)
2m 04.45s: subpicture preset(1), mode(0)
2m 08.65s: subpicture(32) mode(0)
2m 08.65s: connect to sub render filter
18m 59.71s: subpicture(32) mode(0)
18m 59.71s: connect to sub render filter
22m 35.97s: ------ cancel all mobile work -------

[jdigital]

I was under the impression that posting these logs would help. Thoughts?

[jdigital]

Maybe it's time to switch out that sub render filter....

[jdigital]

This computer is brand new! How quickly do those filters have to be replaced?

[jdigital]

Somebody just crossed the 51% mark! It was a dirty filter!