BD Ripper (3D Plus) Intel quick synac / performance

[greekman123]

Hi,

I have a new laptop that I'm trying out quick sync in Dvd fab and have odder results. I do have a system that supports this, and arc soft media converter and badaboom work fine with this system and show performance improvements.

In bd ripper if I have h264 and mpeg2 decoder set to IQS and the encoder set to IQS, it works, but is almost 2x slower than software encoders / decoders.

Version is 8.1.0.5qt. Am I missing something here?

[malcolm]

Hi, greekman123,

Did you uncheck the option for Lightning Recoding right below, when you want the priority of IQS? You know, you can't have the tiger and the lion in one cage as they gonna fight against each other.

[greekman123]

Thanks Malcom, I will give that a try.

[malcolm]

More than welcome, buddy!

Good luck, then!

[greekman123]

Some progress, sort of

Ok, some progress...

I had look at my new system (a laptop)...and it has a handy dandy utility called Intel Control center. It had 2 settings for power ...plugged in and on battery. Both were set to balanced....being more weighted to battery life. (Why anyone wouldn't want max performance when plugged in is a bit of a mystery...)

I now get 230+ fps when ripping dvds.

However, blu-rays don't work at all (tried numerous ones today). It churns for about 10 seconds, then crashes:

mobile work failed(504.00 0 error: process exception, filter(type128:id13), info = 503.00 13,

I've tried with encoding as IQS, and all decoding as software, mpeg2 as software and IQS, same with h.264. Also fiddled with Lightning option.

The only one works is using software decoding for all. I'll post a snip from the logs.

Thanks again for the help.

[greekman123]

and the logs...

Sorry if it's a bit lengthy, (is there somewhere else I should post these in the future?)

0m 00.96s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 00.96s: Qt Translator file load success
0m 06.78s: detected blu-ray
0m 06.78s: drive E
0m 06.78s: blu-ray type 1
0m 06.78s: volume label DRIVE_ANGRY
0m 08.53s: root 8CDB92A72014B421_VOLUME_SET_IDRIVE_ANGRYRIVE_ANGRYRIVE_ANGRY
0m 09.22s: aacs 1 bd+ 0
0m 10.04s: got discinfo
0m 10.23s: got bdmv
0m 10.24s: Vendor: HL-DT-ST
0m 10.24s: Product: BD-RE BH10NS30
0m 10.24s: Revision: EL00
0m 10.24s: Vendor specific:
0m 10.24s: AACS version: 1
0m 10.24s: Number of concurrent AGIDs: 1
0m 10.24s: Supports bus encryption: NO
0m 10.24s: Supports binding nonce generation: YES
0m 10.24s: Supports Hybrid discs: YES
0m 10.26s: got agid 0
0m 10.28s: sent host cert chal
0m 10.28s: got drive cert chal
0m 10.28s: BEC 0
0m 10.28s: DRIVE_VENDOR 0x0074
0m 10.31s: got drive key
0m 10.60s: got host key signature
0m 10.60s: verified drive signature
0m 10.60s: verified host signature
0m 10.63s: sent host signature and key point
0m 10.65s: got bus key
0m 10.65s: got agid 0
0m 10.68s: sent host cert chal
0m 10.68s: got drive cert chal
0m 10.68s: BEC 0
0m 10.68s: DRIVE_VENDOR 0x0074
0m 10.71s: got drive key
0m 10.71s: got host key signature
0m 10.73s: verified drive signature
0m 10.73s: verified host signature
0m 10.76s: sent host signature and key point
0m 10.76s: got bus key
0m 10.76s: got volume id
0m 10.76s: got volume id mac
0m 10.76s: volume id is correct
0m 10.78s: got vid
0m 10.87s: blu-ray 7E72FB23E81F9DD4A020D96502F94379D87479EE
0m 11.32s: cert BEE=0x00 same
0m 11.74s: D 1FD0E270
0m 11.76s: got vuk
0m 11.76s: got unit key 4
0m 39.85s: got extended bdinfo
0m 39.85s: opened blu-ray
0m 44.63s:


------ begin mobile work(1/1) ------


0m 44.63s: create config(5)
0m 44.63s: convert profile(mkv.h264.audiocopy)
0m 44.63s: blu-ray playlist(162) angle(1) chapter(1->19)
0m 44.63s: stream(4113,AVC,1) stream(4352,DTS-HD MA,0) stream(4608,PGS,8)
0m 46.08s: info: set output video frame_rate(24000/1001)
0m 46.08s: subpicture preset(2), mode(2)
0m 46.08s: processing source(00102.m2ts)
0m 46.08s: info: enable multi-thread software decoder
0m 46.09s: Intel GPU acceleration for video encoding enabled
0m 46.09s: h264_encode: encode param profile(2) level(51) bitrate(7457)
0m 46.42s: subpicture(4608) mode(2)
0m 57.26s: error: process exception, filter(type128:id13), info = 503.00 13,
0m 57.70s: ------ mobile work failed(504.00 0 error: process exception, filter(type128:id13), info = 503.00 13,

) ------


DVDFab 8.1.0.5 (2011/07/08 21:17:45)

0m 00.99s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 00.99s: Qt Translator file load success

[greekman123]

No idea on this one? Is the support team monitoring this forum?

[IPopov50]

No idea on this one? Is the support team monitoring this forum?

Yes, they are monitoring this forum. No solution though. I have my Fab crashes with same error as well (on Video Converter). So, just be patient and update to every built.

[Mr H.264]

I have both an I7 Desktop and I7 laptop with Quicksync enabled, and have spent many weeks playing with different settings and drivers/software updates.

If I set QS to both encode and decode, I also get 25 fps avge speeds through the entire process. If I set QS to decode and software to encode I get 120fps avge. If I do software decode + QS encode I get 120fps avge but the file is unplayable with jumpy video and distorted audio.

The only time I have managed to get both encode and decode with QS working was with a dvd rip and it got to 500fps but the final file was also jumpy and distorted. So I have set it to QS decode and SFT encode for now untill it gets fixed.

[whaleshark]

An interesting thread and one that I have had similar problems with since installing the QT series. My present problem (DVD Fab Version 8106QT) refers purely to BD Ripper using 'Gladiator' as my test and stopping the process after about 10 to 20 minutes so as to check the results. I am ripping to PS3 MP4 format. Relevant logfile entries are copied below. So far, for all present BD rips, I am still using 8085 as this one works well - It seems that the latest 'QT' series have problems - Any help would be gratefully received;

1) Start process normally, ripping the BD PS3 MP4 file to desktop hard drive and cancel after about 10 to 20 minutes
2) Playback on my desktop (Win 7 64 bit) is good for about 3 to 5 minutes but then the audio disappears with only video continuing
3) Copy the file to my Network NPnP hard drive and stream to the PS3
4) Playback is very 'jumpy and stuttering'
5) However, at the point where the sound track disappears (see 2 above), the video becomes smooth and of the normal good quality

Here are the latest logfile extracts;

DVDFAB_BURN VSO
2011-07-12 13:02:36    ----     ******************** Log session stop 12-Jul 13:02:36.544 PID 2296********************
2011-07-12 12:45:07    Info     Current Drive selected : 1:0:0 - HL-DT-ST BDDVDRW CH10LS20 1.00 [E] (Ide)
2011-07-12 12:45:07    Info     Using Advanced SPTI interface
2011-07-12 12:45:07    Info     System default language : English (United States)
2011-07-12 12:45:07    Info     User default language : English (United States)
2011-07-12 12:45:07    Info     DLL Version : 4.0.15.480
2011-07-12 12:45:07    Info     DLL : C:\Program Files (x86)\DVDFab 8\vso_hwe.dll
2011-07-12 12:45:07    Info     Version : 8, 0, 8, 5
2011-07-12 12:45:07    Info     ExeName : C:\Program Files (x86)\DVDFab 8\DVDFab.exe
2011-07-12 12:45:07    Info     OS : Microsoft Windows 7 Professional (Build 7601: Service Pack 1)
2011-07-12 12:45:07    ----     ******************** Log session start 12-Jul 12:45:07.968 PID 2296********************
 
 
2011-07-12 12:45:36    ----     ******************** Log session stop 12-Jul 12:45:36.551 PID 2496********************
2011-07-12 12:19:46    Info     Current Drive selected : 1:0:0 - HL-DT-ST BDDVDRW CH10LS20 1.00 [E] (Ide)
2011-07-12 12:19:46    Info     Using Advanced SPTI interface
2011-07-12 12:19:46    Info     System default language : English (United States)
2011-07-12 12:19:46    Info     User default language : English (United States)
2011-07-12 12:19:46    Info     DLL Version : 4.0.20.488
2011-07-12 12:19:46    Info     DLL : C:\Program Files (x86)\DVDFab 8 Qt\vso_hwe.dll
2011-07-12 12:19:46    Info     Version : 8, 1, 0, 6
2011-07-12 12:19:46    Info     ExeName : C:\Program Files (x86)\DVDFab 8 Qt\DVDFab.exe
2011-07-12 12:19:46    Info     OS : Microsoft Windows 7 Professional (Build 7601: Service Pack 1)
2011-07-12 12:19:46    ----     ******************** Log session start 12-Jul 12:19:46.557 PID 2496********************
 
 
2011-07-12 12:19:35    ----     ******************** Log session stop 12-Jul 12:19:35.715 PID 3000********************
2011-07-12 12:16:43    Info     Current Drive selected : 1:0:0 - HL-DT-ST BDDVDRW CH10LS20 1.00 [E] (Ide)
2011-07-12 12:16:43    Info     Using Advanced SPTI interface
2011-07-12 12:16:43    Info     System default language : English (United States)
2011-07-12 12:16:43    Info     User default language : English (United States)
2011-07-12 12:16:43    Info     DLL Version : 4.0.20.488
2011-07-12 12:16:43    Info     DLL : C:\Program Files (x86)\DVDFab 8 Qt\vso_hwe.dll
2011-07-12 12:16:43    Info     Version : 8, 1, 0, 6
2011-07-12 12:16:43    Info     ExeName : C:\Program Files (x86)\DVDFab 8 Qt\DVDFab.exe
2011-07-12 12:16:43    Info     OS : Microsoft Windows 7 Professional (Build 7601: Service Pack 1)
2011-07-12 12:16:43    ----     ******************** Log session start 12-Jul 12:16:43.960 PID 3000********************
 
 
2011-07-12 11:13:22    ----     ******************** Log session stop 12-Jul 11:13:22.944 PID 4040********************
2011-07-12 10:07:50    Info     Current Drive selected : 1:0:0 - HL-DT-ST BDDVDRW CH10LS20 1.00 [E] (Ide)
2011-07-12 10:07:50    Info     Using Advanced SPTI interface
2011-07-12 10:07:50    Info     System default language : English (United States)
2011-07-12 10:07:50    Info     User default language : English (United States)
2011-07-12 10:07:50    Info     DLL Version : 4.0.15.480
2011-07-12 10:07:50    Info     DLL : C:\Program Files (x86)\DVDFab 8\vso_hwe.dll
2011-07-12 10:07:50    Info     Version : 8, 0, 8, 5
2011-07-12 10:07:50    Info     ExeName : C:\Program Files (x86)\DVDFab 8\DVDFab.exe
2011-07-12 10:07:50    Info     OS : Microsoft Windows 7 Professional (Build 7601: Service Pack 1)
2011-07-12 10:07:50    ----     ******************** Log session start 12-Jul 10:07:50.784 PID 4040********************
 
 
DVDFAB_INTERNAL
 
DVDFab 8.1.0.6 (2011/07/12 12:19:40)
 
0m 01.74s: option dvd2dvd 0 dvd2mobile 1 bluray2bluray 0 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 01.74s: Qt Translator file load success 
0m 08.47s: detected blu-ray
0m 08.47s: drive E
0m 08.47s: blu-ray type 1
0m 08.47s: volume label GLADIATOR_D1
0m 10.62s: root 8CBE0F006B512098_VOLUME_SET_ID:GLADIATOR_D1:GLADIATOR_D1:GLADIATOR_D1
0m 11.46s: aacs 1 bd+ 0
0m 12.54s: got discinfo
0m 12.65s: got bdmv
0m 12.65s: Vendor: HL-DT-ST
0m 12.66s: Product: BDDVDRW CH10LS20
0m 12.66s: Revision: 1.00
0m 12.66s: Vendor specific: 4
0m 12.66s: AACS version: 1
0m 12.66s: Number of concurrent AGIDs: 1
0m 12.66s: Supports bus encryption: NO
0m 12.66s: Supports binding nonce generation: YES
0m 12.66s: Supports Hybrid discs: YES
0m 12.66s: got agid 0
0m 12.68s: sent host cert chal
0m 12.68s: got drive cert chal
0m 12.68s: BEC 0
0m 12.68s: DRIVE_VENDOR 0x0116
0m 12.71s: got drive key
0m 12.94s: got host key signature
0m 12.94s: verified drive signature
0m 12.94s: verified host signature
0m 12.97s: sent host signature and key point
0m 12.97s: got bus key
0m 12.99s: got agid 0
0m 13.01s: sent host cert chal
0m 13.01s: got drive cert chal
0m 13.01s: BEC 0
0m 13.01s: DRIVE_VENDOR 0x0116
0m 13.04s: got drive key
0m 13.05s: got host key signature
0m 13.05s: verified drive signature
0m 13.05s: verified host signature
0m 13.08s: sent host signature and key point
0m 13.08s: got bus key
0m 13.08s: got volume id
0m 13.08s: got volume id mac
0m 13.08s: volume id is correct
0m 13.08s: got vid
0m 13.19s: blu-ray 262244E8C4747B200635F97424777927AC72D43F
0m 13.69s: cert BEE=0x00 same
0m 13.69s: got vuk
0m 13.69s: got unit key 7
0m 58.36s: got extended bdinfo
0m 58.36s: opened blu-ray
1m 27.09s: 
 
 
------ begin mobile work(1/1) ------
 
 
1m 27.09s: create config(5)
1m 27.09s: convert profile(ps3.mp4.hd)
1m 27.09s: blu-ray playlist(13) angle(0) chapter(1->28)
1m 27.11s: stream(4113,AVC,1) stream(4352,DTS-HD MA,1) 
1m 27.12s: not set correct fourcc for video(28)
1m 27.14s: info: set output video frame_rate(24000/1001)
1m 27.15s: processing source(00102.m2ts)
1m 27.18s: info: enable multi-thread software decoder
1m 28.21s: h264_encode: encode param profile(2) level(41) bitrate(5634)
10m 27.12s: processing source(00198.m2ts)
16m 55.95s: processing source(00103.m2ts)
18m 16.31s: processing source(00105.m2ts)
23m 19.42s: ------ cancel all mobile work -------
 
 
DVDFab 8.0.8.5 (2011/07/12 12:47:30)
 
0m 01.15s: option dvd2dvd 0 dvd2mobile 1 bluray2bluray 0 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 06.06s: detected blu-ray
0m 06.06s: drive E
0m 06.06s: blu-ray type 1
0m 06.06s: volume label GLADIATOR_D1
0m 08.72s: root 8CBE0F006B512098_VOLUME_SET_ID:GLADIATOR_D1:GLADIATOR_D1:GLADIATOR_D1
0m 09.57s: aacs 1 bd+ 0
0m 10.62s: got discinfo
0m 10.73s: got bdmv
0m 10.73s: got agid 0
0m 10.74s: failed to send host certificate: sensekey 05 asc 6F acsq 00
0m 10.81s: blu-ray 262244E8C4747B200635F97424777927AC72D43F
0m 11.87s: D 7808D83A
0m 11.87s: E F8A0E9B1
0m 11.88s: got vuk
0m 12.19s: got unit key 7
0m 57.47s: got extended bdinfo
0m 57.47s: opened blu-ray
1m 25.12s: 
 
 
------ begin mobile work(1/1) ------
 
 
1m 25.12s: create config(5)
1m 25.12s: convert profile(ps3.mp4.hd)
1m 25.12s: blu-ray playlist(13) angle(0) chapter(1->28)
1m 25.12s: stream(4113,AVC,1) stream(4352,DTS-HD MA,1) 
1m 25.14s: not set correct fourcc for video(28)
1m 25.14s: info: set output video frame_rate(24000/1001)
1m 25.17s: processing source(00102.m2ts)
1m 25.19s: using software decoder(h264 multi-thread)
1m 26.22s: h264_encode: encode param profile(2) level(41) bitrate(5634)
10m 14.62s: processing source(00198.m2ts)
15m 44.19s: ------ cancel all mobile work -------

[Mr H.264]

I noticed in the 8.1.0.6 QT beta notes that several issues with Quicksync have been fixed. Has anyone tried it yet?

[greekman123]

Yep, downloaded last night - worked no better for IQS than the previous version.