BD Ripper (3D Plus) 8.1.5.3 Build Crashing

[Montyburns36]

Hi,

I am trying to rip I Am Legend and District 9 from Blu Ray. It works fine for the iphone4.mp4 settings. But if I try to do the iphone4.1080p.mp4 settings, it crashes after a couple minutes. I get the standard DVDFab ... has stopped working message from Windows. What is causing this? Any other blu ray discs I rip at these settings complete successfully.

Thanks,

Darryl

[Montyburns36]

Log...

Here is the internal log. See the time at
DVDFab 8.1.5.3 (2012/01/12 20:29:26)

Nothing has written to the process log since 2012/01/07.

Thanks.

[Montyburns36]

Fails on 8.1.5.4 Also

Tried it on the latest beta just in case, but no luck...

DVDFab 8.1.5.4 (2012/01/13 17:52:05)

0m 01.74s: Qt Translator file load success
0m 01.78s: Load config successful.
0m 03.76s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 03.95s: Config ExBar successful.
0m 06.18s: Config work ui controls successful.
0m 07.61s: detected blu-ray
0m 07.61s: drive H
0m 07.61s: blu-ray type 1
0m 07.61s: volume label I_AM_LEGEND_NA
0m 07.71s: aacs 1 bd+ 0
0m 08.41s: got discinfo
0m 08.56s: got bdmv
0m 08.57s: Vendor: ATAPI
0m 08.57s: Product: iHBS112 2
0m 08.57s: Revision: PL01
0m 08.57s: Vendor specific: 2011/05/13 14:43
0m 08.57s: AACS version: 1
0m 08.57s: Number of concurrent AGIDs: 2
0m 08.57s: Supports bus encryption: YES
0m 08.57s: Supports binding nonce generation: NO
0m 08.57s: Supports Hybrid discs: NO
0m 08.57s: got agid 0
0m 08.63s: sent host cert chal
0m 08.63s: got drive cert chal
0m 08.63s: BEC 1
0m 08.63s: DRIVE_VENDOR 0x0080
0m 08.71s: got drive key
0m 09.13s: got host key signature
0m 09.13s: verified drive signature
0m 09.13s: verified host signature
0m 09.21s: sent host signature and key point
0m 09.21s: got bus key
0m 09.21s: got agid 0
0m 09.27s: sent host cert chal
0m 09.28s: got drive cert chal
0m 09.28s: BEC 1
0m 09.28s: DRIVE_VENDOR 0x0080
0m 09.35s: got drive key
0m 09.35s: got host key signature
0m 09.35s: verified drive signature
0m 09.35s: verified host signature
0m 09.43s: sent host signature and key point
0m 09.43s: got bus key
0m 11.45s: got volume id
0m 11.45s: got volume id mac
0m 11.45s: volume id is correct
0m 11.45s: got vid
0m 11.64s: blu-ray B9BD563320695F27CED3F592AA674B8BA437521C
0m 12.18s: cert BEE=0x00 same
0m 12.68s: D C2021587
0m 12.69s: got vuk
0m 12.69s: got agid 0
0m 12.75s: sent host cert chal
0m 12.75s: got drive cert chal
0m 12.75s: BEC 1
0m 12.75s: DRIVE_VENDOR 0x0080
0m 12.83s: got drive key
0m 12.83s: got host key signature
0m 12.83s: verified drive signature
0m 12.83s: verified host signature
0m 12.90s: sent host signature and key point
0m 12.91s: got bus key
0m 12.91s: got data key
0m 13.14s: got unit key 1
0m 31.66s: got extended bdinfo
0m 31.66s: opened blu-ray
0m 42.82s:


------ begin mobile work(1/1) ------


0m 42.82s: info: create config(5)
0m 42.82s: info: convert profile(iphone.default)
0m 42.82s: info: bluray playlist(6),angle(0),chapter(1->28),3D(0)
0m 42.82s: info: streams((4113.2)(4353.2)(4608.16)(4609.16)(4610.16 )(4611.16)(4612.16))
0m 44.92s: info: not set correct fourcc for video(28)
0m 44.92s: info: set output video frame_rate(24000/1001)
0m 44.92s: info: subpicture preset(2), mode(10)
0m 44.92s: info: subpicture preset(2), mode(10)
0m 44.92s: info: subpicture preset(2), mode(10)
0m 44.92s: info: subpicture preset(2), mode(10)
0m 44.92s: info: subpicture preset(2), mode(10)
0m 44.94s: info: enable multi-thread software decoder
0m 46.87s: info: h264_encode: encode param profile(1) level(41) bitrate(3208)
0m 49.22s: subpicture(4608) mode(10)
0m 53.25s: info: processing source(00006.m2ts)

[terry5]

Please update your fab to the latest build 8154 and try it again.

[Montyburns36]

Fails on the latest beta

I already did that. See the log above. Thanks

[CBR929]

Hi Montyburns36
Please try the latest version found here http://forum.dvdfab.com/showthread.php?t=16223

Please make sure you have your settings set to software

Open Fab click the Click the Green √ at top right corner of the DVD Fab screen, and open Common Settings > General >A/V Codec, put a check in Disable all GPU codes and make sure they are set to Software, restart Fab and try again.

Please do not convert from your drive
First save it to your HDD as BD50 "Main Movie" without compression.
Then open the hard drive folder and use the folder on your HDD to do your converting.
Doing it this way saves wear and tear on your optical drive and is also faster.

CBR929

[Montyburns36]

Worked Almost 100%...

Thanks for the tip. I had not played with the tool enough to know to do it that way. It is much quicker.

I tried it on the latest build. I Am Legend created successfully. District 9 threw an error at 100%. Here is what the process log has:

Conversion: one pass: 21:39:52
Source( 00011.m2ts )
: 21:39:58
Work 1 failed, Error = 504.00 0 error: filter name(503.13), type(256), id(12), get std_exception(bad allocation)

: 22:28:33

And the internal log:

DVDFab 8.1.5.6 (2012/01/17 20:54:19)

0m 04.46s: Qt Translator file load success
0m 04.54s: Load config successful.
0m 04.55s: Init profile data driver sucessful.
0m 08.19s: Init GPU settings sucessful.
0m 08.19s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 08.20s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 08.50s: Config ExBar successful.
0m 08.50s: dvd2dvd have 8 elements.
0m 08.73s: dvd2mobile have 28 elements.
0m 09.73s: blu-ray2blu-ray have 4 elements.
0m 09.78s: blu-ray2mobile have 17 elements.
0m 10.35s: blu-ray23d have 7 elements.
0m 10.59s: blu-ray2dvd have 1 elements.
0m 10.62s: file2mobile have 27 elements.
0m 11.53s: file2dvd have 1 elements.
0m 11.57s: file2bluray have 1 elements.
0m 12.03s: Config work ui controls successful.
0m 12.19s: Init burn engine successful.
0m 12.26s: StartNotify successful.
0m 11.58s: error: filter name(503.13), type(256), id(12), get std_exception(bad allocation)
0m 14.17s: ------ mobile work failed(504.00 0 error: filter name(503.13), type(256), id(12), get std_exception(bad allocation)

) ------
0m 16.20s:


------ begin mobile work(1/1) ------


0m 16.20s: info: create config(5)
0m 16.20s: info: convert profile(iphone.default)
0m 16.20s: info: bluray playlist(0),angle(0),chapter(1->16),3D(0)
0m 16.20s: info: streams((4113.2)(4352.2)(4608.16)(4609.16)(4611.16 )(4610.16)(4612.16)(4613.16)(4615.16)(4614.16)(461 6.16)(4617.16)(4618.16)(4619.16)(4620.16)(4621.16) )
0m 16.20s: info: not set correct fourcc for video(28)
0m 16.21s: info: set output video frame_rate(24000/1001)
0m 16.21s: info: subpicture preset(2), mode(10)
0m 16.21s: info: subpicture preset(2), mode(10)
0m 16.21s: info: subpicture preset(2), mode(10)
0m 16.21s: info: subpicture preset(2), mode(10)
0m 16.21s: info: subpicture preset(2), mode(10)
0m 16.21s: info: subpicture preset(2), mode(10)
0m 16.21s: info: subpicture preset(2), mode(10)
0m 16.22s: info: subpicture preset(2), mode(10)
0m 16.22s: info: subpicture preset(2), mode(10)
0m 16.22s: info: subpicture preset(2), mode(10)
0m 16.22s: info: subpicture preset(2), mode(10)
0m 16.22s: info: subpicture preset(2), mode(10)
0m 16.22s: info: subpicture preset(2), mode(10)
0m 16.22s: info: subpicture preset(2), mode(10)
0m 16.24s: info: enable multi-thread software decoder
0m 18.08s: info: h264_encode: encode param profile(1) level(41) bitrate(4186)
0m 20.42s: subpicture(4608) mode(10)
0m 22.45s: info: processing source(00011.m2ts)
0m 54.40s: error: filter name(503.13), type(256), id(12), get std_exception(bad allocation)
0m 56.88s: ------ mobile work failed(504.00 0 error: filter name(503.13), type(256), id(12), get std_exception(bad allocation)

It created all the files. What does that error mean?

Thanks,

Darryl

[terry5]

Hi Montyburns36，
How about the latest release build 8159? Please try it and tell us the result. Thanks.