I was trying to use bluray ripper to rip Road to Nowhere Bluray (http://www.amazon.com/Road-Nowhere-B...8965144&sr=8-2 ).
On version 8.1.6.1QT this rip would fail between 20-25% with the popup 'Process Failed'; I tried 4x. I used an older version 8.0.7.3 i had installed, and it ripped no problems.
Here is the error log information to help you determine the error if possible. I think i copied the correct log information, it was huge.
================================================== ====
Conversion: one pass: 19:59:25
Source( 00003.m2ts )
: 19:59:37
Source( 00004.m2ts )
: 19:59:38
Work 1 failed, Error = 504.00 0 error: filter name(506.03), type(1), id(22), get std_exception(bad allocation)
: 21:07:00
================================================== =====
DVDFab 8.1.6.1 (2012/02/10 19:56:25)
0m 05.15s: Qt Translator file load success
DVDFab 8.1.6.1 (2012/02/10 19:57:47)
0m 01.37s: Qt Translator file load success
0m 01.42s: Load config successful.
0m 01.43s: Init profile data driver sucessful.
0m 03.82s: Init GPU settings sucessful.
0m 03.82s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 03.83s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 04.04s: Config ExBar successful.
0m 04.04s: dvd2dvd have 8 elements.
0m 04.18s: dvd2mobile have 28 elements.
0m 04.87s: blu-ray2blu-ray have 4 elements.
0m 04.91s: blu-ray2mobile have 18 elements.
0m 05.34s: blu-ray23d have 7 elements.
0m 05.48s: blu-ray2dvd have 1 elements.
0m 05.51s: file2mobile have 27 elements.
0m 06.19s: file2dvd have 1 elements.
0m 06.21s: file2bluray have 1 elements.
0m 06.52s: Config work ui controls successful.
0m 08.35s: Init burn engine successful.
0m 08.38s: StartNotify successful.
0m 11.25s: detected blu-ray
0m 11.25s: drive D
0m 11.25s: blu-ray type 1
0m 11.25s: volume label ROAD TO NOWHERE
0m 17.49s: aacs 1 bd+ 0
0m 17.76s: got discinfo
0m 17.79s: got bdmv
0m 17.80s: Vendor: HL-DT-ST
0m 17.80s: Product: BD-RE WH12LS30
0m 17.80s: Revision: 1.00
0m 17.80s: Vendor specific:
0m 17.80s: AACS version: 1
0m 17.80s: Number of concurrent AGIDs: 1
0m 17.80s: Supports bus encryption: NO
0m 17.80s: Supports binding nonce generation: YES
0m 17.81s: Supports Hybrid discs: NO
0m 17.81s: got agid 0
0m 17.83s: sent host cert chal
0m 17.83s: got drive cert chal
0m 17.83s: BEC 0
0m 17.83s: DRIVE_VENDOR 0x0074
0m 17.87s: got drive key
0m 18.29s: got host key signature
0m 18.31s: verified drive signature
0m 18.31s: verified host signature
0m 18.34s: sent host signature and key point
0m 18.35s: got bus key
0m 18.36s: got agid 0
0m 18.38s: sent host cert chal
0m 18.39s: got drive cert chal
0m 18.39s: BEC 0
0m 18.39s: DRIVE_VENDOR 0x0074
0m 18.43s: got drive key
0m 18.43s: got host key signature
0m 18.43s: verified drive signature
0m 18.43s: verified host signature
0m 18.47s: sent host signature and key point
0m 18.47s: got bus key
0m 18.48s: got volume id
0m 18.48s: got volume id mac
0m 18.48s: volume id is correct
0m 18.48s: got vid
0m 18.57s: blu-ray 04CEDADB2F649622E5E7C42F442C6B85416E011A
0m 18.85s: cert BEE=0x00
0m 19.29s: D D2DAC671
0m 19.30s: got vuk
0m 19.30s: got unit key 1
0m 25.24s: got extended bdinfo
0m 25.24s: opened blu-ray
0m 38.90s:
------ begin mobile work(1/1) ------
0m 38.91s: info: create config(5)
0m 38.91s: info: convert profile(ps3.mp4.hd)
0m 38.91s: info: bluray playlist(0),angle(0),chapter(1->11),3D(0)
0m 38.92s: info: streams((4113.2)(4352.2)(4608.8))
0m 38.92s: info: not set correct fourcc for video(28)
0m 38.93s: info: set output video frame_rate(24000/1001)
0m 38.96s: info: enable multi-thread software decoder
0m 42.94s: info: h264_encode: encode param profile(2) level(41) bitrate(1219)
0m 50.25s: info: processing source(00003.m2ts)
0m 51.14s: info: processing source(00004.m2ts)
0m 08.79s: error: filter name(506.03), type(1), id(22), get std_exception(bad allocation)
0m 13.51s: ------ mobile work failed(504.00 0 error: filter name(506.03), type(1), id(22), get std_exception(bad allocation)
On version 8.1.6.1QT this rip would fail between 20-25% with the popup 'Process Failed'; I tried 4x. I used an older version 8.0.7.3 i had installed, and it ripped no problems.
Here is the error log information to help you determine the error if possible. I think i copied the correct log information, it was huge.
================================================== ====
Conversion: one pass: 19:59:25
Source( 00003.m2ts )
: 19:59:37
Source( 00004.m2ts )
: 19:59:38
Work 1 failed, Error = 504.00 0 error: filter name(506.03), type(1), id(22), get std_exception(bad allocation)
: 21:07:00
================================================== =====
DVDFab 8.1.6.1 (2012/02/10 19:56:25)
0m 05.15s: Qt Translator file load success
DVDFab 8.1.6.1 (2012/02/10 19:57:47)
0m 01.37s: Qt Translator file load success
0m 01.42s: Load config successful.
0m 01.43s: Init profile data driver sucessful.
0m 03.82s: Init GPU settings sucessful.
0m 03.82s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 03.83s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 04.04s: Config ExBar successful.
0m 04.04s: dvd2dvd have 8 elements.
0m 04.18s: dvd2mobile have 28 elements.
0m 04.87s: blu-ray2blu-ray have 4 elements.
0m 04.91s: blu-ray2mobile have 18 elements.
0m 05.34s: blu-ray23d have 7 elements.
0m 05.48s: blu-ray2dvd have 1 elements.
0m 05.51s: file2mobile have 27 elements.
0m 06.19s: file2dvd have 1 elements.
0m 06.21s: file2bluray have 1 elements.
0m 06.52s: Config work ui controls successful.
0m 08.35s: Init burn engine successful.
0m 08.38s: StartNotify successful.
0m 11.25s: detected blu-ray
0m 11.25s: drive D
0m 11.25s: blu-ray type 1
0m 11.25s: volume label ROAD TO NOWHERE
0m 17.49s: aacs 1 bd+ 0
0m 17.76s: got discinfo
0m 17.79s: got bdmv
0m 17.80s: Vendor: HL-DT-ST
0m 17.80s: Product: BD-RE WH12LS30
0m 17.80s: Revision: 1.00
0m 17.80s: Vendor specific:
0m 17.80s: AACS version: 1
0m 17.80s: Number of concurrent AGIDs: 1
0m 17.80s: Supports bus encryption: NO
0m 17.80s: Supports binding nonce generation: YES
0m 17.81s: Supports Hybrid discs: NO
0m 17.81s: got agid 0
0m 17.83s: sent host cert chal
0m 17.83s: got drive cert chal
0m 17.83s: BEC 0
0m 17.83s: DRIVE_VENDOR 0x0074
0m 17.87s: got drive key
0m 18.29s: got host key signature
0m 18.31s: verified drive signature
0m 18.31s: verified host signature
0m 18.34s: sent host signature and key point
0m 18.35s: got bus key
0m 18.36s: got agid 0
0m 18.38s: sent host cert chal
0m 18.39s: got drive cert chal
0m 18.39s: BEC 0
0m 18.39s: DRIVE_VENDOR 0x0074
0m 18.43s: got drive key
0m 18.43s: got host key signature
0m 18.43s: verified drive signature
0m 18.43s: verified host signature
0m 18.47s: sent host signature and key point
0m 18.47s: got bus key
0m 18.48s: got volume id
0m 18.48s: got volume id mac
0m 18.48s: volume id is correct
0m 18.48s: got vid
0m 18.57s: blu-ray 04CEDADB2F649622E5E7C42F442C6B85416E011A
0m 18.85s: cert BEE=0x00
0m 19.29s: D D2DAC671
0m 19.30s: got vuk
0m 19.30s: got unit key 1
0m 25.24s: got extended bdinfo
0m 25.24s: opened blu-ray
0m 38.90s:
------ begin mobile work(1/1) ------
0m 38.91s: info: create config(5)
0m 38.91s: info: convert profile(ps3.mp4.hd)
0m 38.91s: info: bluray playlist(0),angle(0),chapter(1->11),3D(0)
0m 38.92s: info: streams((4113.2)(4352.2)(4608.8))
0m 38.92s: info: not set correct fourcc for video(28)
0m 38.93s: info: set output video frame_rate(24000/1001)
0m 38.96s: info: enable multi-thread software decoder
0m 42.94s: info: h264_encode: encode param profile(2) level(41) bitrate(1219)
0m 50.25s: info: processing source(00003.m2ts)
0m 51.14s: info: processing source(00004.m2ts)
0m 08.79s: error: filter name(506.03), type(1), id(22), get std_exception(bad allocation)
0m 13.51s: ------ mobile work failed(504.00 0 error: filter name(506.03), type(1), id(22), get std_exception(bad allocation)