I've had Gettysburg fail on me with three different builds using the .h264 multichannel settings so I tried it just using 2 channel prologic and it worked. Here is the log info for it. I have a question though, why does it say that the top of the log entries: GPUAccelerate: 12351 and CUDA cap: 1? Does that mean GPU Accelerate is active? Because according to the interface it isn't.
DVDFab 8.1.9.1 (2012/07/15 00:50:47)
0m 00.70s: GPUAccelerate: 12351
0m 00.70s: CUDA cap: 1
0m 00.70s: Support coreavc decode: 0
0m 00.70s: Graphics info: NVIDIA GeForce GTX 560 Ti : 4.20 : 2.1
0m 00.70s: Qt Translator file load success
0m 00.71s: Load config successful.
0m 00.71s: Init profile data driver sucessful.
0m 02.16s: Init GPU settings sucessful.
0m 02.16s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 0 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 02.16s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 02.32s: Config ExBar successful.
0m 02.32s: dvd2dvd have 8 elements.
0m 02.41s: dvd2mobile have 29 elements.
0m 02.93s: blu-ray2blu-ray have 4 elements.
0m 02.94s: blu-ray2mobile have 18 elements.
0m 03.29s: blu-ray23d have 7 elements.
0m 03.38s: blu-ray2dvd have 1 elements.
0m 03.40s: file2mobile have 28 elements.
0m 03.91s: file2dvd have 1 elements.
0m 03.93s: file2bluray have 1 elements.
0m 04.16s: Config work ui controls successful.
0m 04.22s: Init burn engine successful.
0m 04.27s: StartNotify successful.
0m 04.30s: opening drive G
0m 04.32s: failed to detect media type
0m 04.34s: got max lba 0
0m 14.96s: opening folder D:/Temp/FullDisc/GETTYSBURG/BDMV/
0m 15.10s: got bdmv
0m 15.25s: got extended bdinfo
0m 15.55s: WorkAttr::Init Start
0m 15.58s: WorkAttr::Init OK: iPad.mp4
0m 46.31s: WorkAttr::Init Start
0m 46.32s: WorkAttr::Init OK: iPad3.h264.multichannel
0m 51.22s:
------ begin mobile work(1/1) ------
0m 51.22s: info: create config(5)
0m 51.22s: info: convert profile(iPad3.h264.multichannel)
0m 51.22s: info: bluray playlist(100),angle(0),chapter(1->67),3D(0)
0m 51.22s: info: streams((4113.2)(4352.2))
0m 51.22s: info: not set correct fourcc for video(28)
0m 51.25s: info: set output video frame_rate(24000/1001)
0m 51.25s: info: enable multi-thread software decoder
0m 52.27s: info: h264_encode: encode param profile(1) level(41) bitrate(7458)
0m 56.32s: info: processing source(00020.m2ts)
0m 29.24s: error: filter name(506.03), type(1), id(24), get std_exception(bad allocation)
0m 34.72s: ------ mobile work failed(504.00 0 error: filter name(506.03), type(1), id(24), get std_exception(bad allocation)
) ------
DVDFab 8.1.9.1 (2012/07/15 05:23:44)
0m 00.78s: GPUAccelerate: 12351
0m 00.78s: CUDA cap: 1
0m 00.78s: Support coreavc decode: 0
0m 00.78s: Graphics info: NVIDIA GeForce GTX 560 Ti : 4.20 : 2.1
0m 00.78s: Qt Translator file load success
0m 00.79s: Load config successful.
0m 00.79s: Init profile data driver sucessful.
0m 02.21s: Init GPU settings sucessful.
0m 02.21s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 0 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 02.21s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 02.37s: Config ExBar successful.
0m 02.37s: dvd2dvd have 8 elements.
0m 02.46s: dvd2mobile have 29 elements.
0m 02.98s: blu-ray2blu-ray have 4 elements.
0m 02.99s: blu-ray2mobile have 18 elements.
0m 03.32s: blu-ray23d have 7 elements.
0m 03.43s: blu-ray2dvd have 1 elements.
0m 03.44s: file2mobile have 28 elements.
0m 03.96s: file2dvd have 1 elements.
0m 03.97s: file2bluray have 1 elements.
0m 04.21s: Config work ui controls successful.
0m 04.27s: Init burn engine successful.
0m 04.32s: StartNotify successful.
0m 04.35s: opening drive G
0m 04.37s: failed to detect media type
0m 04.38s: got max lba 0
0m 14.99s: opening folder D:/Temp/FullDisc/GETTYSBURG/BDMV/
0m 15.04s: got bdmv
0m 15.07s: got extended bdinfo
0m 15.33s: WorkAttr::Init Start
0m 15.36s: WorkAttr::Init OK: iPad.mp4
0m 25.62s: WorkAttr::Init Start
0m 25.62s: WorkAttr::Init OK: iPad3.h264.1080p
0m 38.77s:
------ begin mobile work(1/1) ------
0m 38.77s: info: create config(5)
0m 38.77s: info: convert profile(iPad3.h264.1080p)
0m 38.77s: info: bluray playlist(100),angle(0),chapter(1->67),3D(0)
0m 38.77s: info: streams((4113.2)(4352.2)(4608.8))
0m 40.31s: info: not set correct fourcc for video(28)
0m 40.31s: info: set output video frame_rate(24000/1001)
0m 40.31s: info: subpicture preset(1), mode(1)
0m 40.31s: info: enable multi-thread software decoder
0m 41.33s: info: h264_encode: encode param profile(1) level(41) bitrate(7458)
0m 43.35s: info: subpicture(4608) mode(1)
0m 43.35s: info: connect to sub render filter
0m 45.38s: info: processing source(00020.m2ts)
0m 29.82s:
DVDFab 8.1.9.1 (2012/07/15 00:50:47)
0m 00.70s: GPUAccelerate: 12351
0m 00.70s: CUDA cap: 1
0m 00.70s: Support coreavc decode: 0
0m 00.70s: Graphics info: NVIDIA GeForce GTX 560 Ti : 4.20 : 2.1
0m 00.70s: Qt Translator file load success
0m 00.71s: Load config successful.
0m 00.71s: Init profile data driver sucessful.
0m 02.16s: Init GPU settings sucessful.
0m 02.16s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 0 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 02.16s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 02.32s: Config ExBar successful.
0m 02.32s: dvd2dvd have 8 elements.
0m 02.41s: dvd2mobile have 29 elements.
0m 02.93s: blu-ray2blu-ray have 4 elements.
0m 02.94s: blu-ray2mobile have 18 elements.
0m 03.29s: blu-ray23d have 7 elements.
0m 03.38s: blu-ray2dvd have 1 elements.
0m 03.40s: file2mobile have 28 elements.
0m 03.91s: file2dvd have 1 elements.
0m 03.93s: file2bluray have 1 elements.
0m 04.16s: Config work ui controls successful.
0m 04.22s: Init burn engine successful.
0m 04.27s: StartNotify successful.
0m 04.30s: opening drive G
0m 04.32s: failed to detect media type
0m 04.34s: got max lba 0
0m 14.96s: opening folder D:/Temp/FullDisc/GETTYSBURG/BDMV/
0m 15.10s: got bdmv
0m 15.25s: got extended bdinfo
0m 15.55s: WorkAttr::Init Start
0m 15.58s: WorkAttr::Init OK: iPad.mp4
0m 46.31s: WorkAttr::Init Start
0m 46.32s: WorkAttr::Init OK: iPad3.h264.multichannel
0m 51.22s:
------ begin mobile work(1/1) ------
0m 51.22s: info: create config(5)
0m 51.22s: info: convert profile(iPad3.h264.multichannel)
0m 51.22s: info: bluray playlist(100),angle(0),chapter(1->67),3D(0)
0m 51.22s: info: streams((4113.2)(4352.2))
0m 51.22s: info: not set correct fourcc for video(28)
0m 51.25s: info: set output video frame_rate(24000/1001)
0m 51.25s: info: enable multi-thread software decoder
0m 52.27s: info: h264_encode: encode param profile(1) level(41) bitrate(7458)
0m 56.32s: info: processing source(00020.m2ts)
0m 29.24s: error: filter name(506.03), type(1), id(24), get std_exception(bad allocation)
0m 34.72s: ------ mobile work failed(504.00 0 error: filter name(506.03), type(1), id(24), get std_exception(bad allocation)
) ------
DVDFab 8.1.9.1 (2012/07/15 05:23:44)
0m 00.78s: GPUAccelerate: 12351
0m 00.78s: CUDA cap: 1
0m 00.78s: Support coreavc decode: 0
0m 00.78s: Graphics info: NVIDIA GeForce GTX 560 Ti : 4.20 : 2.1
0m 00.78s: Qt Translator file load success
0m 00.79s: Load config successful.
0m 00.79s: Init profile data driver sucessful.
0m 02.21s: Init GPU settings sucessful.
0m 02.21s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 0 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 02.21s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 02.37s: Config ExBar successful.
0m 02.37s: dvd2dvd have 8 elements.
0m 02.46s: dvd2mobile have 29 elements.
0m 02.98s: blu-ray2blu-ray have 4 elements.
0m 02.99s: blu-ray2mobile have 18 elements.
0m 03.32s: blu-ray23d have 7 elements.
0m 03.43s: blu-ray2dvd have 1 elements.
0m 03.44s: file2mobile have 28 elements.
0m 03.96s: file2dvd have 1 elements.
0m 03.97s: file2bluray have 1 elements.
0m 04.21s: Config work ui controls successful.
0m 04.27s: Init burn engine successful.
0m 04.32s: StartNotify successful.
0m 04.35s: opening drive G
0m 04.37s: failed to detect media type
0m 04.38s: got max lba 0
0m 14.99s: opening folder D:/Temp/FullDisc/GETTYSBURG/BDMV/
0m 15.04s: got bdmv
0m 15.07s: got extended bdinfo
0m 15.33s: WorkAttr::Init Start
0m 15.36s: WorkAttr::Init OK: iPad.mp4
0m 25.62s: WorkAttr::Init Start
0m 25.62s: WorkAttr::Init OK: iPad3.h264.1080p
0m 38.77s:
------ begin mobile work(1/1) ------
0m 38.77s: info: create config(5)
0m 38.77s: info: convert profile(iPad3.h264.1080p)
0m 38.77s: info: bluray playlist(100),angle(0),chapter(1->67),3D(0)
0m 38.77s: info: streams((4113.2)(4352.2)(4608.8))
0m 40.31s: info: not set correct fourcc for video(28)
0m 40.31s: info: set output video frame_rate(24000/1001)
0m 40.31s: info: subpicture preset(1), mode(1)
0m 40.31s: info: enable multi-thread software decoder
0m 41.33s: info: h264_encode: encode param profile(1) level(41) bitrate(7458)
0m 43.35s: info: subpicture(4608) mode(1)
0m 43.35s: info: connect to sub render filter
0m 45.38s: info: processing source(00020.m2ts)
0m 29.82s:
Comment