dredd 3d

cereal510

so i bought dredd 3d and ripped it. completed, but it ripped the 2d file not 3d. i tried title 800 and 801, and both are only the 2d feed. this is the first time i have seen this. both 2d and 3d versions are on the one disc, so any info would be great. thanks guys.

terry5

What's the version of DVDFab are you using?
Mode info are needed. Please post the internal log. Thanks.

cereal510

9.0.2.0

cereal510

sorry forgot to post the log...
0m 20.30s: got disc type 20
0m 20.30s: type Blu-ray BDMV
0m 20.30s: volume label DREDD
0m 20.31s: opening drive I
0m 20.31s: opened i/o
0m 20.31s: failed to detect media type: sensekey 00 asc 00 acsq 00
0m 20.31s: got max lba 0
0m 20.36s: internal path G:/BDMV/
0m 20.37s: aacs 1 bd+ 0
0m 21.87s: Java protection is removed by StealthyClone anti-protection.
0m 21.96s: got discinfo
0m 22.13s: got bdmv
0m 22.14s: Vendor: Optiarc
0m 22.14s: Product: BD RW BD-5300S
0m 22.14s: Revision: 1.04
0m 22.14s: Vendor specific: 2011/02/17 13:59
0m 22.14s: AACS version: 1
0m 22.14s: Number of concurrent AGIDs: 2
0m 22.14s: Supports bus encryption: NO
0m 22.14s: Supports binding nonce generation: YES
0m 22.14s: Supports Hybrid discs: NO
0m 22.14s: got agid 0
0m 22.20s: sent host cert chal
0m 22.20s: got drive cert chal
0m 22.20s: BEC 0
0m 22.20s: DRIVE_VENDOR 0x0128
0m 22.28s: got drive key
0m 22.28s: got host key signature
0m 22.28s: verified drive signature
0m 22.28s: verified host signature
0m 22.36s: sent host signature and key point
0m 22.36s: got bus key
0m 22.37s: got agid 0
0m 22.43s: sent host cert chal
0m 22.43s: got drive cert chal
0m 22.43s: BEC 0
0m 22.43s: DRIVE_VENDOR 0x0128
0m 22.51s: got drive key
0m 22.51s: got host key signature
0m 22.51s: verified drive signature
0m 22.51s: verified host signature
0m 22.59s: sent host signature and key point
0m 22.59s: got bus key
0m 24.89s: got volume id
0m 24.89s: got volume id mac
0m 24.89s: volume id is correct
0m 24.90s: got vid
0m 25.83s: blu-ray 73AEBD4E54B9E6E8AB4377A9D808DC01B93A2E43
0m 26.35s: cert BEE=0x00 same
0m 27.77s: D 949FD90E
0m 27.77s: got vuk
0m 28.07s: got unit key 4
0m 53.78s: got extended bdinfo
0m 53.78s: opened blu-ray
0m 57.62s: Subtitle default mode is invalid, so set default mode is 1
3m 09.70s: Start check Blu-ray Ripper register status.
3m 09.70s: End check Blu-ray Ripper register status: Enable
3m 09.73s: OPList at BD Ripper : (4113.2),(4352.2),(4608.8)
3m 09.73s: Blu-ray ripper check watermark flag: 0
3m 09.73s:

------ begin mobile work(1/1) ------

3m 09.73s: info: create config(5)
3m 09.73s: info: convert profile(G17 EVO 3D)
3m 09.73s: info: bluray playlist(800),angle(0),chapter(1->17),3D(0)
3m 09.73s: info: streams((4113.2)(4352.2)(4608.8))
3m 09.74s: info: not set correct fourcc for video(13)
3m 09.74s: info: set output video frame_rate(24000/1001)
3m 09.74s: info: SubMode(1)
3m 09.75s: info: enable multi-thread software decoder
3m 09.77s: info: subpicture(4608) mode(1)
3m 09.77s: info: connect to sub render filter
3m 09.80s: info: processing source(00201.m2ts)
15m 08.40s: info: processing source(00451.m2ts)
17m 27.72s: info: processing source(00452.m2ts)
19m 14.88s: info: processing source(00453.m2ts)
31m 41.98s:

------ finish mobile work ------

403m 41.57s: Subtitle default mode is invalid, so set default mode is 1

cereal510

any help from the file? thx

terry5

Hi cereal510,
The profile for "G17 EVO 3D" is a 2D Device profile. Not matter what source you inserted, the output files is 2D.
If you want to change it to a 3D profile, you can select "G17 EVO 3D" profile, click Edit button, Enable subtitle, Enable 3D and then save the custom profile. Then use it to create 3D files.

cereal510

awesome, thanks terry. the switch ver 9 has thrown me for a loop with the diff ui.

evilronin

HSBS convert for Dredd Blu Ray

I also bought the Blu Ray of Dredd and it appears to have both 2D and 3D. I'm running 9.0.2.6 on Win7 64bit. It seems to back it up as a 3D BD just fine as with compression from 50Gb to 25GB, however when I go to back it up as a HSBS 3D, epic fail, even just to convert the movie only to HSBS. It seems to work on in converter mode, but I don't want it to convert the 2D version to 3D HSBS when there is already a 3D version it can use to convert to HSBS. Any advise to can give would be great. Thanks.