Announcement

**ebarnes75** · 01-30-2013, 06:56 AM

I had a similar issue with another disk. I fixed it by not using CUDA. Check "Disable all GPU codecs for encoding and decoding" from the "General" -> "A/V Codec" section and try it again.

**glenns** · 01-30-2013, 01:13 PM

Ebarns75:
If you read my post you would know i turned cuda off and included a log with it off on the second try and it made no difference.Fab staff recommend using a different profile i used m2ts fast for both try's and tried a third time with hi quality m2ts and cuda and that made no difference i am trying a older version 8085 now to see if this works.

This is not a cuda problem as with all software checked the audio lag is still their.I tried profiles from fast m2ts to hi quality m2ts that made no difference so what else can be causing this audio lag?

**glenns** · 01-31-2013, 12:20 AM

I try'ed 8.0.8.5 still the audio is out of sync with the video.

**glenns** · 01-31-2013, 06:45 AM

Vivian from staff came up with a good work around for my audio sync problem i was converting a blu-ray using m2ts fast audio copy and had the audio lag problem with and without all software checked.Vivian says to try m2ts a/c 3 normal profile i did so and it worked fine even with Cuda engaged.

Only problem is the soundtrack was Dolby true 5.1 and now with the a/c 3 normal profile it's just Dolby 5.1.Their still remains a problem with the profiles to be fixed so they work correctly on all soundtracks.

Fab staff should have this on the to do list being their are more and more people reporting this type of problem.I never have a problem with Dts hd soundtracks it may be a Dolby true problem.I don't know if everyone's problems are the same as mine but i am posting this for those that may be helped from this information.

**fengtao** · 02-03-2013, 03:02 PM

0m 20.24s: failed to detect media type: sensekey 00 asc 00 acsq 00

It seems your drive cannot read the disc correctly, please check if drive or disc is faulty.

**Fred_S** · 02-03-2013, 09:57 PM

I had this problem too under version 9.0.2.4. I "got around it" by doing a "copy" to my hard drive as a "BD25 1080p/i" then using Handbrake to convert to a .m4v.

**glenns** · 02-04-2013, 12:21 AM

Freds: 9.0.2.4 that just came out fixed both the audio lag problem and a Dolby true problem converting to regular Dolby 5.1.

Fengtao:0m 20.24s: failed to detect media type: sensekey 00 asc 00 acsq 00
I use virtual drive that i use and load movies in it to convert.In the virtual drive program i have 3 virtual drives.My computer has only 1 disk drive and magic jack lists as a drive on the computer but i unchecked it in software so it shouldn't show up in my logs.Should i un check the 3 virtual drives in software settings or will this cause fab not to work with a movie in them ready to convert?

Every time i use Fab with Virtual drive and load a movie in it the log shows fab checking all the drives on my computer for a movie and when it checks the 3 virtual drives only one has a movie the real blu-ray drive is empty because the disk is already on the computer on hard drive (#2) and ready for conversion.So when Fab finds a empty drive it puts this message in the log for each drive that's empty (0m 20.24s: failed to detect media type: sensekey 00 asc 00 acsq 00) so i really don't know if this is a bug but the log doe's report all the empty drives it has checked for a movie and everything works well in conversions even though fabs log is reporting all the times it's looking for the movie.

Another thing is the last few versions of version 9 have been crashing not every time but often i sent in 2 crash reports over the last few weeks also can you look at this when you can thanks Glenns.

Announcement

Audio lags video

BD Ripper (3D Plus) Audio lags video

Comment

Comment

Comment

Comment

Comment

Comment

Comment