BD Ripper (3D Plus) Alex Cross

[8855A]

I copy the main movie(Alex Cross) to hdd, iso, played it with vlc and everything was ok!, but everytime I use BD ripper to MKV 264 autocopy! I get the audio ahead of the video!

I'ved used both v9 & v8, both new releases, and older v9 & v8 and still audio is ahead of video!

This is the first Blu-ray I ever had a problem with!, that I couldn't fix! All my movies are MKV 264 Autocopy!

Then I put them on my media player(AIOS)

[8855A]

Tryed old faithful 8178QT BD-ripper same results! Anyone else having this problem?

[CodeeCB]

Alex Cross - Audio/Video Lag

Has anyone tried ripping Alex Cross on Blu-Ray?

http://www.amazon.com/Alex-Cross-Blu...rds=alex+cross

I am having constant issues with just this movie. It rips fine but the audio and video lags throughout the whole movie. I am ripping to MKV with passthrough video+audio w/DTS HD Master audio track. There is roughly 30 titles for this movie after DVDFab analyzes it, varying in length from 1hr 39mins to 1hr 42mins if I remember correctly. The official runtime (on IMDB) is 1hr 41mins. First I just used the default track DVDFab selected as its ALWAYS been correct in the past but this time no luck. I have tried 6 other tracks so far and every one seems to lag the same.

Has anybody successfully gotten Alex Cross to rip with proper audio sync and if so which title was it?

As far as troubleshooting goes, I tried ripping the entire bluray to my drive and then ripping and also turned off all hardware decoding. As I said I have successfully done many movies, this is the first one giving me issues.
Thanks!

I should specify I am currently using version 8.2.2.7 and tried with the previous version number first.

[CodeeCB]

Looks like I am having the same exact issue as you - I made a post about it as well, not thinking our issue was the same (you said MKV 264 Autocopy) but perhaps you are doing the same as me - I use MKV with audio+video pass through and am getting audio lag. I'm using 8.2.2.7 myself. Did you find a solution yet?

[90312]

I merged the threads here.

[Book1985]

I made a successful copy of the blurry however when I put it into my bd player or ps3 I get the following msg. Copy detected (or a rip tool is running if you are trying to watch this movie on your pc). Please visit https://e1.continuemovie.com for more information.

[Book1985]

Looks like a more anoying protection than that civenia stuff

[Norm@Home]

I don't know if this is relevant to this discussion but I'm watching "Alec Cross" after having ripped it with 9.0.2.5 using avi.h264.ac3 and I'm finding that scenes are not showing in the proper order.

Has anyone else encountered this problem?

- Norm

[8855A]

Is it just us few having trouble with ALEX CROSS?

Has anybody else been having this problems?

The reason for a forum is to help each other out!

Has Fab looked into this, is it on the list for updated? Or fixed!

Everyone is saying this is the only Blu-ray there having problems with!

It looks like this movie is being over looked just like "Prometheus" was when it came out! I had to use a competitors software for " Prometheus"!

Will I have to do that again?

[CBR929]

Hi 8855A
You have been around here awhile and know that the developer needs the internal log, so please post it.
Thanks
CBR929

[8855A]

DVDFab 9.0.2.6 (2013/02/07 19:10:02)

0m 00.13s: Start preload dll...
0m 00.19s: Load dll successful.
0m 00.19s: Start load fabplay dll...
0m 00.25s: Load fabplay dll successful.
0m 00.25s: Windows os type is: 13.
0m 00.25s: Transfer settings successful.
0m 00.46s: GPUAccelerate: 28735
0m 00.46s: CUDA cap: 1
0m 00.46s: Support coreavc decode: 1
0m 00.46s: Graphics info: NVIDIA GeForce GTX 460 : 5.0 : 2.1
0m 00.46s: Qt Translator file load success
0m 00.51s: Start get sys number.
0m 00.52s: Serial number is: 50-e5-49-3e-07-b5
0m 00.52s: Reg URL link is: https://www.dvdfabstore.com/auth/v2/
0m 00.52s: Version is: 9026
0m 00.52s: Product is: 2
0m 00.53s: Connect type is: 0
0m 01.59s: Times of connecting error is: 0
0m 01.59s: Parse string is: 1:1397976952
0m 01.59s: Parse string is: 20:1383622186
0m 01.60s: Parse string is: 21:1368805702
0m 01.60s: Parse string is: OV:9026
0m 01.60s: Parse string is: BV:9024
0m 01.60s: Parse string is: S:c104ec5a24b10c2cbca71036e54b8dc0
0m 02.01s: End check info.
0m 02.02s: Load config successful.
0m 02.63s: Profile Manager :: Begin Load Profile
0m 02.63s: Init profile data driver sucessful.
0m 02.63s: Init GPU settings sucessful.
0m 02.63s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 02.65s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 04.27s: Begin init preview play engine.
0m 04.27s: Init DirectShow engine successful.
0m 05.25s: Init burn engine successful.
0m 05.90s: opening drive D
0m 05.97s: opened i/o
0m 05.97s: failed to detect media type: sensekey 00 asc 00 acsq 00
0m 06.01s: got max lba 0
0m 06.06s: opening drive E
0m 06.07s: opened i/o
0m 06.07s: failed to detect media type: sensekey 00 asc 00 acsq 00
0m 06.07s: got max lba 0
0m 10.75s: Profile Manager :: End Load Profile
1m 44.72s: set folder F:/MainMovie/ALEX_CROSS-BD/BDMV/ with type 2
1m 44.72s: opening folder F:/MainMovie/ALEX_CROSS-BD/BDMV/
1m 47.02s: set folder F:/MainMovie/ALEX_CROSS-BD/BDMV/ with type 2
1m 47.02s: opening folder F:/MainMovie/ALEX_CROSS-BD/BDMV/
1m 47.16s: got bdmv
1m 47.72s: got extended bdinfo
5m 23.41s: Start check Blu-ray Ripper register status.
5m 23.41s: End check Blu-ray Ripper register status: Enable
5m 23.42s: OPList at BD Ripper : (4113.2),(4352.1),(4608.8)
5m 23.42s: Blu-ray ripper check watermark flag: 0
5m 23.43s: ------------------ convert work begin(1/1) ------------------
5m 23.43s: info: create config(bluray2video)
5m 23.43s: info: use profile(mkv.default)
5m 23.43s: info: bluray playlist(0),angle(0),chapter(1->25),BDAV(no)
5m 23.43s: info: 3D working_mode(disable), 3D format(sbs_lef_right)
5m 23.45s: info: [Video]stream(4113) codec(h264) opcode(compress)
5m 23.47s: info: set output video frame_rate(24000/1001)
5m 23.47s: info: [Audio]stream(4352) codec(dca) opcode(copy) channel(8)
5m 23.47s: info: SubMode(Render) -- Display only forced subpicture(false)
5m 23.47s: info: [Sub]stream(4608) codec(pgssub) opcode(render) language(English)
5m 23.48s: try to use gpu acceleration(1) for video decoding
5m 23.48s: CUDA GPU acceleration for video decoding enabled
5m 23.48s: CUDA GPU acceleration for video encoding enabled
5m 23.50s: info: h264_encode: encode param profile(2) level(41) bitrate(15000)
5m 23.62s: info: connect to sub render filter success.
5m 23.63s: info: processing source(00516.m2ts)
7m 11.10s: info: processing source(00515.m2ts)
7m 19.81s: info: processing source(00518.m2ts)
12m 06.16s: info: processing source(00507.m2ts)
16m 15.17s: info: processing source(00512.m2ts)
22m 34.38s: info: processing source(00520.m2ts)
28m 45.72s: info: processing source(00519.m2ts)
29m 05.36s: info: processing source(00503.m2ts)
29m 16.73s: info: processing source(00504.m2ts)
46m 09.03s: ------------------ convert work finished ------------------

DVDFab 8.2.2.7 (2013/02/07 19:59:49)

0m 00.96s: Start preload dll...
0m 01.00s: Load dll successful.
0m 01.01s: Start load fabplay dll...
0m 01.06s: Load fabplay dll successful.
0m 01.07s: Windows os type is: 13.
0m 01.08s: Transfer settings successful.
0m 01.25s: GPUAccelerate: 28735
0m 01.25s: CUDA cap: 1
0m 01.25s: Support coreavc decode: 1
0m 01.25s: Graphics info: NVIDIA GeForce GTX 460 : 5.0 : 2.1
0m 01.26s: Qt Translator file load success
0m 01.30s: Load config successful.
0m 01.53s: Init profile data driver sucessful.
0m 03.44s: Init GPU settings sucessful.
0m 03.44s: option dvd2dvd 0 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 03.45s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 03.73s: Config ExBar successful.
0m 03.73s: dvd2dvd have 8 elements.
0m 03.81s: dvd2mobile have 31 elements.
0m 04.70s: blu-ray2blu-ray have 4 elements.
0m 04.74s: blu-ray2mobile have 20 elements.
0m 05.31s: blu-ray23d have 7 elements.
0m 05.49s: blu-ray2dvd have 1 elements.
0m 05.52s: file2mobile have 30 elements.
0m 06.39s: file2dvd have 1 elements.
0m 06.42s: file2bluray have 1 elements.
0m 06.70s: Config work ui controls successful.
0m 09.32s: Init burn engine successful.
0m 09.40s: StartNotify successful.
0m 27.07s: set folder F:/MainMovie/ALEX_CROSS-BD/BDMV/ with type 2
0m 27.07s: opening folder F:/MainMovie/ALEX_CROSS-BD/BDMV/
0m 27.11s: got bdmv
0m 27.27s: got extended bdinfo
0m 28.27s: WorkAttr::Init Start
0m 28.30s: WorkAttr::Init OK: mkv.default
2m 11.77s:


------ begin mobile work(1/1) ------


2m 11.78s: info: create config(5)
2m 11.78s: info: convert profile(mkv.default)
2m 11.78s: info: bluray playlist(0),angle(0),chapter(1->25),3D(0)
2m 11.78s: info: streams((4113.2)(4352.1)(4608.16))
2m 11.79s: info: set output video frame_rate(24000/1001)
2m 11.80s: info: subpicture preset(2), mode(10)
2m 11.81s: try to use gpu acceleration(1) for video decoding
2m 11.81s: CUDA GPU acceleration for video decoding enabled
2m 11.81s: CUDA GPU acceleration for video encoding enabled
2m 11.82s: info: h264_encode: encode param profile(2) level(41) bitrate(15000)
2m 11.91s: subpicture(4608) mode(10)
2m 11.92s: info: processing source(00516.m2ts)
3m 59.11s: info: processing source(00515.m2ts)
4m 07.92s: info: processing source(00518.m2ts)
8m 54.80s: info: processing source(00507.m2ts)
13m 04.21s: info: processing source(00512.m2ts)
19m 23.81s: info: processing source(00520.m2ts)
25m 36.08s: info: processing source(00519.m2ts)
25m 55.79s: info: processing source(00503.m2ts)
26m 07.18s: info: processing source(00504.m2ts)
43m 01.37s:


------ finish mobile work ------
I used several different V9 & V8, but all of them does the same thing! The Audio is out of sync!, and in my case, the Audio is ahead of the vedio!

[8855A]

Has Alex Cross been checked into yet?

Or, am I the only one having problems with this movie? BD-Ripper, MKV h264 autocopy! Audio out of sync!

[CBR929]

Hi 8855A
Have you also tried it with Cuda disabled???
CBR929

[8855A]

CBR929,

No I haven't! I'll give that a try!, but this PC was my first build back at Dec.2011 and it settled in and hadn't had a problem with any movie since! Now Prometheus was one that never worked, but Alex Cross is the 2nd one!

Pretty good track record, I'm so use to having not to ever change settings, I really never taught about it! I'm so use to BD-Ripper putting everything in order when Blu-ray copy has m2t's all out of order, I never even check!

If you know what I mean! I just forgot about the other settings, tell you the truth!

[CBR929]

Hi 8855A
You have nothing to loose by trying.
The Fab team is celebrating their New Year and I'm sure they will look into this when they return.
Have a good weekend!!!
CBR929