Please can anyone help.
I'm running 9.0.2.6 of the Bluray ripper and I'm using the Apple TV 3 profile but since the update every Bluray I rip has the audio slightly behind the picture and is out of sync.
I've tried disabling all gpu codes, not using the lightning recorder etc - 2 pass vs 1 pass but it's the same every time.
I even had to uninstall and reinstall yesterday as I stopped getting audio all together.
My normal settings are : 1920 x 1080, with all GPU codes enabled and set to CUDA (since I'm running a 570 GTX) and I use the default AppleTV3 profile but set to high quality.
Here are my log files which I created decoding one chapter of the film.
162m 12.17s: Start check Blu-ray Ripper register status.
162m 12.17s: End check Blu-ray Ripper register status: Enable
162m 12.17s: OPList at BD Ripper : (4113.2),(4352.2)
162m 12.17s: Blu-ray ripper check watermark flag: 0
162m 12.17s: ------------------ convert work begin(1/1) ------------------
162m 12.17s: info: create config(bluray2video)
162m 12.17s: info: use profile(Apple TV3.default)
162m 12.18s: info: bluray playlist(800),angle(0),chapter(3->3),BDAV(no)
162m 12.18s: info: 3D working_mode(disable), 3D format(sbs_lef_right)
162m 12.19s: info: [Video]stream(4113) codec(h264) opcode(compress)
162m 12.19s: info: set output video frame_rate(24000/1001)
162m 12.19s: info: [Audio]stream(4352) codec(dca) opcode(compress) channel(8)
162m 12.19s: info: SubMode(NoSub) -- Display only forced subpicture(false)
162m 12.19s: try to use gpu acceleration(1) for video decoding
162m 12.19s: CUDA GPU acceleration for video decoding enabled
162m 12.20s: CUDA GPU acceleration for video encoding enabled
162m 12.20s: warning: h264 encode macroblocks per second(143856) exceed the standard(108000), video size(1920x800, 23.976), specify profile(1)-level(31)
162m 12.20s: info: h264_encode: encode param profile(1) level(40) bitrate(9207)
162m 12.27s: info: processing source(00505.m2ts)
162m 25.15s: info: processing source(00506.m2ts)
162m 34.52s: info: processing source(00507.m2ts)
162m 46.87s: info: processing source(00508.m2ts)
163m 07.36s: info: processing source(00509.m2ts)
163m 19.05s: info: processing source(00510.m2ts)
163m 27.80s: info: processing source(00511.m2ts)
164m 32.26s: info: processing source(00512.m2ts)
164m 43.69s: info: processing source(00513.m2ts)
165m 02.94s: info: processing source(00514.m2ts)
165m 48.55s: ------------------ convert work finished ------------------
I'm running 9.0.2.6 of the Bluray ripper and I'm using the Apple TV 3 profile but since the update every Bluray I rip has the audio slightly behind the picture and is out of sync.
I've tried disabling all gpu codes, not using the lightning recorder etc - 2 pass vs 1 pass but it's the same every time.
I even had to uninstall and reinstall yesterday as I stopped getting audio all together.
My normal settings are : 1920 x 1080, with all GPU codes enabled and set to CUDA (since I'm running a 570 GTX) and I use the default AppleTV3 profile but set to high quality.
Here are my log files which I created decoding one chapter of the film.
162m 12.17s: Start check Blu-ray Ripper register status.
162m 12.17s: End check Blu-ray Ripper register status: Enable
162m 12.17s: OPList at BD Ripper : (4113.2),(4352.2)
162m 12.17s: Blu-ray ripper check watermark flag: 0
162m 12.17s: ------------------ convert work begin(1/1) ------------------
162m 12.17s: info: create config(bluray2video)
162m 12.17s: info: use profile(Apple TV3.default)
162m 12.18s: info: bluray playlist(800),angle(0),chapter(3->3),BDAV(no)
162m 12.18s: info: 3D working_mode(disable), 3D format(sbs_lef_right)
162m 12.19s: info: [Video]stream(4113) codec(h264) opcode(compress)
162m 12.19s: info: set output video frame_rate(24000/1001)
162m 12.19s: info: [Audio]stream(4352) codec(dca) opcode(compress) channel(8)
162m 12.19s: info: SubMode(NoSub) -- Display only forced subpicture(false)
162m 12.19s: try to use gpu acceleration(1) for video decoding
162m 12.19s: CUDA GPU acceleration for video decoding enabled
162m 12.20s: CUDA GPU acceleration for video encoding enabled
162m 12.20s: warning: h264 encode macroblocks per second(143856) exceed the standard(108000), video size(1920x800, 23.976), specify profile(1)-level(31)
162m 12.20s: info: h264_encode: encode param profile(1) level(40) bitrate(9207)
162m 12.27s: info: processing source(00505.m2ts)
162m 25.15s: info: processing source(00506.m2ts)
162m 34.52s: info: processing source(00507.m2ts)
162m 46.87s: info: processing source(00508.m2ts)
163m 07.36s: info: processing source(00509.m2ts)
163m 19.05s: info: processing source(00510.m2ts)
163m 27.80s: info: processing source(00511.m2ts)
164m 32.26s: info: processing source(00512.m2ts)
164m 43.69s: info: processing source(00513.m2ts)
165m 02.94s: info: processing source(00514.m2ts)
165m 48.55s: ------------------ convert work finished ------------------
Comment