3D Ripper to mkv-SBS does not start

[Mr230268]

Hello,

I installed Version 9.0.3.2. After that I tried to rip two 3D BluRays to a SBS-MKV file with audiocopy.

When I press it says processing source(00875.ssif) and the elapsed time goes up und the remaining time stays at zero. The fps start at 10 und go done to zero. DVDFab uses no CPU so I think the program stops. No file is created.

In the log everthing looks fine, but nothing happens.

I tried it on two PC with Win7 64bit.

Additional Info: m2ts works fine.

Here is the log:

DVDFab 9.0.3.2 (2013/04/03 21:55:43)

0m 04.38s: Start preload dll...
0m 04.44s: Load dll successful.
0m 04.44s: Start load fabplay dll...
0m 04.53s: Load fabplay dll successful.
0m 04.53s: Windows os type is: 13.
0m 04.53s: Transfer settings successful.
0m 06.09s: GPUAccelerate: 0
0m 06.09s: CUDA cap: 0
0m 06.09s: Support coreavc decode: 0
0m 06.09s: Graphics info: RDPDD Chained DD : :
0m 06.29s: Qt Translator file load success
0m 11.23s: Start get sys number.
0m 11.23s: Serial number is: 00-1c-25-51-fd-42
0m 11.23s: Reg URL link is:
0m 11.23s: Version is: 9032
0m 11.23s: Product is: 2
0m 11.23s: Connect type is: 1
0m 12.36s: Times of connecting error is: 0
0m 12.36s: Parse string is: 20:23
0m 12.36s: Parse string is: 22:30
0m 12.36s: Parse string is: OV:9028
0m 12.36s: Parse string is: BV:9032
0m 12.82s: option - 0 : 1 - 2 : 1 - 2 : 1 - 11 : 1 - 20 : 1 - 21 : 1 - 50 : 1 - 60 : 1 - 61 : 1 - 62 : 1 - 80 : 1 - 22 : 1 - 70 : 1 - 71 : 1 - 72 : 1
0m 12.82s: End check info.
0m 12.82s: Load config successful.
0m 15.27s: Init profile data driver sucessful.
0m 15.48s: Init GPU settings sucessful.
0m 29.83s: Begin init preview play engine.
0m 29.83s: Init DirectShow engine successful.
0m 30.02s: Profile Manager :: End Load Profile
0m 34.46s: Init burn engine successful.
0m 38.50s: opening drive D
0m 38.55s: opened i/o
0m 38.56s: failed to detect media type: sensekey 00 asc 00 acsq 00
0m 38.58s: got max lba 0
0m 38.61s: CommmandLine in fabopensource is
1m 05.21s: opening iso C:/Download/WRECK-IT_RALPH_3D.iso
1m 05.29s: got media type 15
1m 05.41s: got max lba 18901215
1m 05.58s: got disc type 20
1m 05.58s: type Blu-ray BDMV
1m 05.58s: volume label WRECK-IT_RALPH_3D
1m 05.75s: internal path ]:/BDMV/
1m 06.39s: aacs 0 bd+ 0
1m 06.77s: got bdmv
1m 09.35s: Java protection is removed by StealthyClone anti-protection.
1m 09.44s: got discinfo
1m 09.47s: got bdmv
1m 13.82s: got extended bdinfo
1m 13.82s: opened blu-ray
1m 16.05s: ========WorkAttr::SetSource=======
1m 16.05s: Source Title :
1m 16.05s: Source Video Codec : mpeg2
1m 16.05s: Source Video Size Original : 1920 x 812
1m 16.05s: Source Video Size Display : 1900 x 804
1m 16.05s: Source Video FPS : 24000 / 1001
1m 16.05s: Source Video Bitrate : 1200
1m 16.05s: Source Audio Codec : aac
1m 16.05s: Source Audio Bitrate : 0
1m 16.05s: Source Audio Channels : 6
1m 16.05s: Source Audio Volume : 100
1m 16.05s: Work Profile : audio.mp3
1m 52.38s: ========WorkAttr::SetSource=======
1m 52.39s: Source Title :
1m 52.39s: Source Video Codec : mpeg2
1m 52.39s: Source Video Size Original : 1920 x 812
1m 52.39s: Source Video Size Display : 1900 x 804
1m 52.39s: Source Video FPS : 24000 / 1001
1m 52.39s: Source Video Bitrate : 1200
1m 52.39s: Source Audio Codec : aac
1m 52.39s: Source Audio Bitrate : 0
1m 52.39s: Source Audio Channels : 6
1m 52.39s: Source Audio Volume : 100
1m 52.39s: Work Profile : 3d.mkv.h264.audiocopy
1m 53.24s: ========WorkAttr::SetSource=======
1m 53.24s: Source Title :
1m 53.24s: Source Video Codec : mpeg2
1m 53.24s: Source Video Size Original : 1920 x 812
1m 53.24s: Source Video Size Display : 1900 x 804
1m 53.24s: Source Video FPS : 24000 / 1001
1m 53.24s: Source Video Bitrate : 1200
1m 53.24s: Source Audio Codec : aac
1m 53.24s: Source Audio Bitrate : 0
1m 53.24s: Source Audio Channels : 6
1m 53.24s: Source Audio Volume : 100
1m 53.24s: Work Profile : 3d.mkv.h264.audiocopy
1m 54.16s: ========WorkAttr::SetSource=======
1m 54.16s: Source Title :
1m 54.16s: Source Video Codec : mpeg2
1m 54.16s: Source Video Size Original : 1920 x 812
1m 54.16s: Source Video Size Display : 1900 x 804
1m 54.16s: Source Video FPS : 24000 / 1001
1m 54.16s: Source Video Bitrate : 1200
1m 54.16s: Source Audio Codec : aac
1m 54.16s: Source Audio Bitrate : 0
1m 54.16s: Source Audio Channels : 6
1m 54.17s: Source Audio Volume : 100
1m 54.17s: Work Profile : 3d.mkv.h264.audiocopy
2m 14.82s: ========WorkAttr::SetSource=======
2m 14.82s: Source Title :
2m 14.82s: Source Video Codec : mpeg2
2m 14.82s: Source Video Size Original : 1920 x 812
2m 14.82s: Source Video Size Display : 1900 x 804
2m 14.82s: Source Video FPS : 24000 / 1001
2m 14.82s: Source Video Bitrate : 1200
2m 14.82s: Source Audio Codec : aac
2m 14.82s: Source Audio Bitrate : 0
2m 14.82s: Source Audio Channels : 6
2m 14.82s: Source Audio Volume : 100
2m 14.82s: Work Profile : 3d.mkv.h264.audiocopy
2m 25.37s: Start check Blu-ray 3D Ripper register status.
2m 25.37s: End check Blu-ray 3D Ripper register status: Enable
2m 25.38s: Product Blu-ray 3D Ripper watermark flag: 1
2m 25.41s: OPList at BD Ripper : (4113.2),(4353.1),(4610.16),(4612.16)
2m 25.41s: Blu-ray ripper check watermark flag: 1
2m 25.41s: ------------------ convert work begin(1/1) ------------------
2m 25.41s: info: create config(bluray2video)
2m 25.41s: info: use profile(3d.mkv.h264.audiocopy)
2m 25.41s: info: bluray playlist(800),angle(0),chapter(1->17),BDAV(no)
2m 25.41s: info: 3D working_mode(bluray_3D), 3D format(sbs_lef_right)
2m 25.56s: info: [Video]stream(4113) codec(h264) opcode(compress)
2m 25.58s: info: set output video frame_rate(24000/1001)
2m 25.59s: info: [Audio]stream(4353) codec(dca) opcode(copy) channel(6)
2m 25.59s: info: SubMode(Extract) -- Display only forced subpicture(false)
2m 25.59s: info: [Sub]stream(4610) codec(pgssub) opcode(extract) language(German)
2m 25.59s: info: [Sub]stream(4612) codec(pgssub) opcode(extract) language(German)
2m 26.72s: info: h264_encode: encode param profile(2) level(41) bitrate(9157)
2m 30.78s: info: processing source(00875.ssif)

[Paynemaster]

Hello,

I installed Version 9.0.3.2. After that I tried to rip two 3D BluRays to a SBS-MKV file with audiocopy.

When I press it says processing source(00875.ssif) and the elapsed time goes up und the remaining time stays at zero. The fps start at 10 und go done to zero. DVDFab uses no CPU so I think the program stops. No file is created.

In the log everthing looks fine, but nothing happens.

I tried it on two PC with Win7 64bit.

Additional Info: m2ts works fine.

it seems iam having the same problem

iam getting this

[geilee]

Hi,
It's a known issue, we are working on it, please stay tuned,thanks.

[Paynemaster]

Hi,
It's a known issue, we are working on it, please stay tuned,thanks.

Hello i just recieved an update from DVD Fab 9.0.3.8
but i still have the problems

Hopefully somebody can help me

[geilee]

Hello i just recieved an update from DVD Fab 9.0.3.8
but i still have the problems

Hopefully somebody can help me

Sorry,i can't repro it, it works fine for me.
Please disable all GPU Accelerate, have it a try. thanks.

[glenns]

Try it with version 8 of Fab version 9 has so many problems.

[Paynemaster]

Sorry,i can't repro it, it works fine for me.
Please disable all GPU Accelerate, have it a try. thanks.

Hehe its working now. thanks allot. not sure why its not working with Gpu. it says. Task Time Left 01.38.10. this is normal right? and why would u whant to use the Gpu is that even faster?

its working on Version 9.0.1.5 gonna test it on others version when iam done

[Paynemaster]

Hello Hello. its also working on the latest DvdFab Version 9.0.3.8. It seems that it is a Gpu issue. Btw, iam trying to rip my 3D Blu-Rays. is it true i can only rip them with Side by Side 3D. i don't whant this i whant the Full 3D. And is it possible to rip the Blu-rays with Blu-Ray Menu?

[cwt]

Hello Hello. its also working on the latest DvdFab Version 9.0.3.8. It seems that it is a Gpu issue. Btw, iam trying to rip my 3D Blu-Rays. is it true i can only rip them with Side by Side 3D. i don't whant this i whant the Full 3D. And is it possible to rip the Blu-rays with Blu-Ray Menu?

Hi paynemaster ;yeah ime ripping my 3d to m2ts audiocopy atm and had to disable my gpu's intel sync for it to start with software instead. Once the gpu acceleration is fixed it will be quicker ;its fast enough for me atm with audiocopy fast profile

Full frame packed hd [from memory ;ime ripping atm] is selected in the advanced tab under 3d format ;just select the 2 video streams files in one file button then ok and your done. 3d ripper doesnt do bd menus an exact copy like an iso with bd copy should i imagine .

[Paynemaster]

Hi paynemaster ;yeah ime ripping my 3d to m2ts audiocopy atm and had to disable my gpu's intel sync for it to start with software instead. Once the gpu acceleration is fixed it will be quicker ;its fast enough for me atm with audiocopy fast profile

Full frame packed hd [from memory ;ime ripping atm] is selected in the advanced tab under 3d format ;just select the 2 video streams files in one file button then ok and your done. 3d ripper doesnt do bd menus an exact copy like an iso with bd copy should i imagine .

Thanks. Iam ripping my 3d blu-ray with 2 streams in one file right now. A question about that audiocopy ur doing. Does that only give u sound? Not sure what its meant to be.

[cwt]

Thanks. Iam ripping my 3d blu-ray with 2 streams in one file right now. A question about that audiocopy ur doing. Does that only give u sound? Not sure what its meant to be.

Both sound and vision payne . m2ts is the basic bluray format and audiocopy lets you pick whether you want the lossless or lossy track very easily from the drpdown menu [ if you haven't turned off /set it in common settings to begin with ]

My oppo doesn't like mkv's with lossless so i shrink them with m2ts and retain the lossless