BD Ripper (3D Plus) Ripper has problems

[glenns]

This is the third new 3d movie I am having trouble ripping to a 3d side by side using m2ts audio copy.This happens with or without cuda,with or without CRF and also with the settings to skip over bad sectors as Signals posted in another topic.

This is using a 50 gig iso from new disks.The decode/encode go's to 7% the FPS go down to 0 and the program just sits their.For the other two movies at same spot a few mins in it stops and sits with FPS going to 0.

Will post the logs later for The Great Gatsby.VERSION 8 is ripping this disk without problem.I did Star trek into the darkness 3d without problem using version 9 so it's some disks given us trouble.

The other two disks I have trouble with is The flying swords of dragon gate 3d and Deep Gold 3d their logs are here and here

I also noticed version 8 FPS is faster with cuda and GPU is in use more than in version 9.

[glenns]

Here is the log file for the Great Gatsby 3d version 9 hangs at 7% with or without cuda,CRF and Fab set to skip bad sectors as per Signals photo shot.

Version 8 was able to do it just fine with faster FPS than version 9.The 50 gig iso plays fine.Used 50 gig iso and m2ts 3d audiocopy normal speed profile.Once again no error's in the log file so why does it trip up the encode/decode when making a side by side where as version 8 has no problem what so ever and is faster,uses more GPU than version 9 also.


DVDFab 9.0.6.7 (2013/09/19 07:16:47)

0m 00.20s: Start preload dll...
0m 00.26s: Load dll successful.
0m 00.27s: Start load fabplay dll...
0m 00.36s: Load fabplay dll successful.
0m 00.37s: Transfer settings successful.
0m 00.38s: fab_check_gpu is running ...
0m 00.79s: fab_check_gpu run successful
0m 00.80s: GPUAccelerate: 12351
0m 00.80s: CUDA cap: 1
0m 00.81s: Support coreavc decode: 0
0m 00.81s: Graphics info: NVIDIA GeForce GT 630 : 5.50 : 2.1
0m 00.82s: Load config successful.
0m 00.83s: Windows os type is: 12.
0m 00.93s: Parse string is: 1:1314749059
0m 00.93s: Parse string is: 20:8263532095
0m 00.94s: Parse string is: 21:8260762964
0m 00.94s: Parse string is: 22:8260762964
0m 00.95s: Parse string is: 70:8260762964
0m 00.95s: Parse string is: 50:8260762964
0m 00.95s: Parse string is: 11:8260762964
0m 00.96s: Parse string is: OV:9063
0m 00.97s: Parse string is: BV:9067
0m 00.97s: Parse string is: S:dbb355a0ed0a3cef60dab4703f761c9c
0m 00.98s: Option check status: Local
0m 00.98s: option dvd2dvd 0 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1
0m 00.99s: Init GPU settings sucessful.
0m 00.99s: CommmandLine:
0m 01.00s: Start get sys number.
0m 01.04s: Serial number is: 00-21-97-4a-93-56
0m 01.04s: Reg URL link is:
0m 01.04s: Version is: 9067
0m 01.04s: Product is: 2
0m 01.04s: Connect type is: 0
0m 02.18s: Begin init preview play engine.
0m 02.19s: Init DirectShow engine successful.
0m 02.20s: Times of connecting error is: 0
0m 02.20s: Parse string is: 1:1314749059
0m 02.21s: Parse string is: 20:8263532095
0m 02.21s: Parse string is: 21:8260762964
0m 02.21s: Parse string is: 22:8260762964
0m 02.22s: Parse string is: 70:8260762964
0m 02.22s: Parse string is: 50:8260762964
0m 02.22s: Parse string is: 11:8260762964
0m 02.23s: Parse string is: OV:9063
0m 02.23s: Parse string is: BV:9067
0m 02.23s: Parse string is: S:1b5d3beb4d7a1e24f211eb6f141fbe9e
0m 02.25s: Option check status: NewWork
0m 02.25s: option dvd2dvd 0 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1
0m 02.96s: Profile Manager :: End Load Profile
0m 08.28s: Init burn engine successful.
0m 10.24s: opening drive G
0m 10.24s: opened i/o
0m 10.25s: got media type 16
0m 10.53s: got max lba 21671967
0m 10.77s: got disc type 20
0m 10.77s: type Blu-ray BDMV
0m 10.77s: volume label THE_GREAT_GATSBY
0m 10.83s: opening drive E
0m 10.87s: opened i/o
0m 10.89s: opening drive H
0m 10.89s: opened i/o
0m 10.89s: opening drive I
0m 10.90s: opened i/o
0m 10.90s: opening drive J
0m 10.94s: opened i/o
0m 10.97s: internal path G:/BDMV/
0m 10.98s: aacs 0 bd+ 0
0m 11.16s: got bdmv
0m 11.16s: movie name: the great gatsby||the_great_gatsby
0m 11.39s: got bdmv
0m 12.64s: got extended bdinfo
0m 12.64s: opened blu-ray
0m 15.98s: Work Profile : 3D m2ts.default
0m 20.78s: Work Profile : 3D m2ts.default
0m 21.01s: Work Profile : 3D m2ts.default
1m 44.14s: Work Profile : 3D m2ts.default
1m 44.38s: Work Profile : 3D m2ts.default
2m 47.61s: Work Profile : 3D m2ts.default
2m 47.88s: Work Profile : 3D m2ts.default
5m 21.51s: Start check Blu-ray Ripper (3D Plus) register status.
5m 21.52s: End check Blu-ray Ripper (3D Plus) register status: Enable
5m 21.81s: OPList at BD Ripper : (4113.2),(4352.2),(4353.2),(4609.32)
5m 21.82s: Blu-ray ripper (3D Plus) check watermark flag: 0
5m 21.82s: ------------------ convert work begin(1/1) ------------------
5m 21.82s: info: create config(bluray2video)
5m 21.83s: info: use profile(3D m2ts.default)
5m 21.84s: info: bluray playlist(98),angle(0),chapter(1->14),BDAV(no)
5m 21.84s: info: 3D working_mode(bluray_3D), 3D format(sbs_lef_right)
5m 21.88s: info: stream input@ Video(4113)[codec(h264) size(1920*1080) fps(24000/1001) interlace(0) opcode(compress)]
5m 21.89s: info: perset file config OK !
5m 21.89s: info: set output video frame_rate(24000/1001)
5m 21.90s: info: stream output Video(4113)[codec(h264) size(1920*800) fps(24000/1001) interlace(0)]
5m 21.91s: info: stream input@ Audio(4352)[codec(dca) channels(6) sample(48000) bitrate(0) bitdepth(16) opcode(compress)]
5m 21.92s: info: stream output Audio(4352)[codec(aac) channels(2) sample(48000) bitrate(128000) bitdepth(16)]
5m 21.93s: info: stream input@ Audio(4353)[codec(ac3) channels(6) sample(48000) bitrate(448000) bitdepth(0) opcode(compress)]
5m 21.94s: info: stream output Audio(4353)[codec(aac) channels(2) sample(48000) bitrate(128000) bitdepth(16)]
5m 21.95s: info: SubMode(Remux) -- Display Only forced Subtitle(false)
5m 21.96s: CUDA GPU acceleration for video encoding enabled
5m 21.97s: info: h264_encode: encode param profile(2) level(41) bitrate(-1) crf(20)
5m 22.28s: info: processing source(00059.ssif)
83m 13.20s: ------------------ all convert work cancelled -------------------

[yemtrader]

I too have had problems with the Flying Swords Of Dragon Gate 3D iso created by DVDFAB. The DVDFab software does not like the image that gets created when you rip the disc as I was able to rip the iso with another decryption software and then DVDFab converted to MKV just fine so it appears something is going wrong when creating the image for that disc.

[glenns]

Here is a screen shot for Flying swords of the dragon gate you see where the decoder/encoder trips up.Left picture clear right picture not fully formed.No setting in skip over bad sectors in software helps skip over bad frame on one side i even set it for 9 re try's.

[glenns]

Here is a screen shot for Deep gold 3d doesn't look to be a problem to me it just hangs here.Again with or without cuda,CRF or Fab programed to skip bad sectors.FPS goe's to 0.

[glenns]

Here is a screen shot for The great Gatsby 3d version 9.It trip's up here at the same place 7% into movie encode/decode no problem with the two pictures in frames no errors in log.Version 8 had no problems making a side by side with same profile same settings.

[8855A]

SO far I've found that V9 will work great to Decypt the Movie, but has trouble converting to different formats and this has happen a lot on a lot of Movies!

I just use the ISO made by V9 on hdd and process it with the lateast V8 and have no problems!

[glenns]

That only worked for 1 disk others it didn't help.

[glenns]

World war z 3d another that won't convert to side by side goes to 9% and FPS counts down to 0 nothing in the logs i can see wrong.



DVDFab 9.0.6.7 (2013/09/20 17:58:26)

0m 00.21s: Start preload dll...
0m 00.28s: Load dll successful.
0m 00.29s: Start load fabplay dll...
0m 00.41s: Load fabplay dll successful.
0m 00.41s: Transfer settings successful.
0m 00.43s: fab_check_gpu is running ...
0m 00.94s: fab_check_gpu run successful
0m 00.95s: GPUAccelerate: 12351
0m 00.95s: CUDA cap: 1
0m 00.96s: Support coreavc decode: 0
0m 00.96s: Graphics info: NVIDIA GeForce GT 630 : 5.50 : 2.1
0m 00.97s: Load config successful.
0m 00.98s: Windows os type is: 12.
0m 01.09s: Parse string is: 1:1314749059
0m 01.09s: Parse string is: 20:8263532095
0m 01.10s: Parse string is: 21:8260762964
0m 01.10s: Parse string is: 22:8260762964
0m 01.10s: Parse string is: 70:8260762964
0m 01.10s: Parse string is: 50:8260762964
0m 01.10s: Parse string is: 11:8260762964
0m 01.10s: Parse string is: OV:9063
0m 01.10s: Parse string is: BV:9067
0m 01.10s: Parse string is: S:008a1b249d88a9eca56938613d234115
0m 01.11s: Option check status: Local
0m 01.11s: option dvd2dvd 0 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1
0m 01.11s: Start get sys number.
0m 01.12s: Init GPU settings sucessful.
0m 01.12s: CommmandLine:
0m 01.15s: Serial number is: 00-21-97-4a-93-56
0m 01.15s: Reg URL link is:
0m 01.15s: Version is: 9067
0m 01.15s: Product is: 2
0m 01.15s: Connect type is: 0
0m 02.23s: Times of connecting error is: 0
0m 02.23s: Parse string is: 1:1314749059
0m 02.24s: Parse string is: 20:8263532095
0m 02.24s: Parse string is: 21:8260762964
0m 02.24s: Parse string is: 22:8260762964
0m 02.25s: Parse string is: 70:8260762964
0m 02.25s: Parse string is: 50:8260762964
0m 02.25s: Parse string is: 11:8260762964
0m 02.25s: Parse string is: OV:9063
0m 02.26s: Parse string is: BV:9067
0m 02.26s: Parse string is: S:9ef8a2b9e22a4d58b5f7fca779777ec9
0m 02.30s: Option check status: NewWork
0m 02.30s: option dvd2dvd 0 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1
0m 02.33s: Begin init preview play engine.
0m 02.34s: Init DirectShow engine successful.
0m 03.19s: Profile Manager :: End Load Profile
0m 11.09s: Init burn engine successful.
0m 12.84s: opening drive F
0m 13.02s: opened i/o
0m 13.14s: opening drive E
0m 13.18s: opened i/o
0m 13.19s: opening drive G
0m 13.20s: opened i/o
0m 13.20s: opening drive H
0m 13.21s: opened i/o
0m 13.21s: opening drive I
0m 13.22s: opened i/o
0m 13.22s: opening drive J
0m 13.26s: opened i/o
0m 52.47s: opening drive J
0m 52.47s: opened i/o
0m 52.47s: got media type 15
0m 58.26s: got max lba 20630655
0m 59.25s: got disc type 20
0m 59.25s: type Blu-ray BDMV
0m 59.25s: volume label World_War_Z_3D
0m 59.27s: opening drive J
0m 59.27s: opened i/o
0m 59.62s: got max lba 20630655
1m 00.71s: got disc type 20
1m 00.71s: internal path J:/BDMV/
1m 01.40s: aacs 1 bd+ 0
1m 01.53s: got bdmv
1m 01.54s: movie name: world war z 3d||world_war_z_3d
1m 01.55s: got agid 0
1m 01.59s: sent host cert chal
1m 01.59s: got drive cert chal
1m 01.60s: BEC 1
1m 01.60s: DRIVE_VENDOR 0x0074
1m 01.66s: got drive key
1m 01.66s: got host key signature
1m 01.66s: verified drive signature
1m 01.67s: verified host signature
1m 01.72s: sent host signature and key point
1m 01.72s: got bus key
1m 01.85s: got volume id
1m 01.85s: got volume id mac
1m 01.85s: volume id is correct
1m 01.85s: got vid
1m 02.05s: blu-ray 66996316800FB6228BD66DA248582B02DC3082F2
1m 02.53s: cert BEE=0x00 same
1m 03.79s: got agid 0
1m 03.83s: sent host cert chal
1m 03.84s: got drive cert chal
1m 03.84s: BEC 1
1m 03.84s: DRIVE_VENDOR 0x0074
1m 03.90s: got drive key
1m 03.90s: got host key signature
1m 03.91s: verified drive signature
1m 03.91s: verified host signature
1m 03.97s: sent host signature and key point
1m 03.97s: got bus key
1m 06.17s: D E04989B9
1m 06.18s: got vuk
1m 06.46s: got unit key 7
1m 10.74s: got bdmv
1m 13.63s: got extended bdinfo
1m 13.63s: opened blu-ray


DVDFab 9.0.6.7 (2013/09/20 18:26:40)

0m 00.21s: Start preload dll...
0m 00.22s: Profile Manager :: Begin Load Profile
0m 00.33s: Load dll successful.
0m 00.33s: Start load fabplay dll...
0m 00.43s: Load fabplay dll successful.
0m 00.45s: Transfer settings successful.
0m 00.47s: fab_check_gpu is running ...
0m 00.94s: fab_check_gpu run successful
0m 00.95s: GPUAccelerate: 12351
0m 00.95s: CUDA cap: 1
0m 00.95s: Support coreavc decode: 0
0m 00.95s: Graphics info: NVIDIA GeForce GT 630 : 5.50 : 2.1
0m 00.96s: Load config successful.
0m 00.97s: Windows os type is: 12.
0m 01.08s: Parse string is: 1:1314749059
0m 01.08s: Parse string is: 20:8263532095
0m 01.08s: Parse string is: 21:8260762964
0m 01.08s: Parse string is: 22:8260762964
0m 01.08s: Parse string is: 70:8260762964
0m 01.08s: Parse string is: 50:8260762964
0m 01.08s: Parse string is: 11:8260762964
0m 01.08s: Parse string is: OV:9063
0m 01.08s: Parse string is: BV:9067
0m 01.08s: Parse string is: S:9ef8a2b9e22a4d58b5f7fca779777ec9
0m 01.09s: Option check status: Local
0m 01.09s: option dvd2dvd 0 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1
0m 01.10s: Start get sys number.
0m 01.10s: Serial number is: 00-21-97-4a-93-56
0m 01.10s: Reg URL link is:
0m 01.10s: Version is: 9067
0m 01.11s: Product is: 2
0m 01.11s: Connect type is: 0
0m 01.11s: Init GPU settings sucessful.
0m 01.11s: CommmandLine:
0m 02.43s: Begin init preview play engine.
0m 02.46s: Init DirectShow engine successful.
0m 02.60s: Times of connecting error is: 0
0m 02.61s: Parse string is: 1:1314749059
0m 02.61s: Parse string is: 20:8263532095
0m 02.61s: Parse string is: 21:8260762964
0m 02.61s: Parse string is: 22:8260762964
0m 02.61s: Parse string is: 70:8260762964
0m 02.61s: Parse string is: 50:8260762964
0m 02.61s: Parse string is: 11:8260762964
0m 02.61s: Parse string is: OV:9063
0m 02.61s: Parse string is: BV:9067
0m 02.62s: Parse string is: S:0f3d6611fe30cbf23562bc32b0448379
0m 02.63s: Option check status: NewWork
0m 02.63s: option dvd2dvd 0 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1
0m 03.34s: Profile Manager :: End Load Profile
0m 11.37s: Init burn engine successful.
0m 13.10s: opening drive F
0m 13.32s: opened i/o
0m 13.36s: opening drive J
0m 13.37s: opened i/o
0m 13.44s: got media type 15
70m 41.24s: opening drive G
70m 41.35s: opened i/o
70m 41.35s: got media type 16
70m 41.37s: got max lba 20630655
70m 41.60s: got disc type 20
70m 41.61s: type Blu-ray BDMV
70m 41.61s: volume label World_War_Z_3D
70m 41.67s: internal path G:/BDMV/
70m 41.78s: aacs 0 bd+ 0
70m 41.98s: got bdmv
70m 41.99s: movie name: world war z 3d||world_war_z_3d
70m 42.67s: got bdmv
70m 44.05s: got extended bdinfo
70m 44.05s: opened blu-ray
70m 47.71s: Work Profile : 3D m2ts.default
70m 56.42s: Work Profile : 3D m2ts.default
70m 56.66s: Work Profile : 3D m2ts.default
71m 10.99s: Start check Blu-ray Ripper (3D Plus) register status.
71m 11.00s: End check Blu-ray Ripper (3D Plus) register status: Enable
71m 11.09s: OPList at BD Ripper : (4113.2),(4352.2),(4356.2),(4608.32),(4609.32)
71m 11.10s: Blu-ray ripper (3D Plus) check watermark flag: 0
71m 11.10s: ------------------ convert work begin(1/1) ------------------
71m 11.11s: info: create config(bluray2video)
71m 11.12s: info: use profile(3D m2ts.default)
71m 11.12s: info: bluray playlist(800),angle(0),chapter(1->18),BDAV(no)
71m 11.13s: info: 3D working_mode(bluray_3D), 3D format(sbs_lef_right)
71m 11.15s: info: stream input@ Video(4113)[codec(h264) size(1920*1080) fps(24000/1001) interlace(0) opcode(compress)]
71m 11.16s: info: perset file config OK !
71m 11.16s: info: set output video frame_rate(24000/1001)
71m 11.16s: info: stream output Video(4113)[codec(h264) size(1920*800) fps(24000/1001) interlace(0)]
71m 11.17s: info: stream input@ Audio(4352)[codec(dca) channels(8) sample(48000) bitrate(0) bitdepth(24) opcode(compress)]
71m 11.18s: info: stream output Audio(4352)[codec(aac) channels(2) sample(48000) bitrate(128000) bitdepth(16)]
71m 11.18s: info: stream input@ Audio(4356)[codec(ac3) channels(6) sample(48000) bitrate(640000) bitdepth(0) opcode(compress)]
71m 11.20s: info: stream output Audio(4356)[codec(aac) channels(2) sample(48000) bitrate(128000) bitdepth(16)]
71m 11.21s: info: SubMode(Remux) -- Display Only forced Subtitle(false)
71m 11.24s: CUDA GPU acceleration for video encoding enabled
71m 11.24s: info: h264_encode: encode param profile(2) level(41) bitrate(-1) crf(20)
71m 11.47s: info: processing source(00800.ssif)

[glenns]

I just made another iso of world war z with the same brand new 3d disk that i used in version 9 in the post above.This time using version 8 and used it to make the side by side it did so without any problems and faster than version 9.

Version 9 makes ISO's that ripper has trouble converting to other formats.
Please fix this as we can't use version 9 newest CRF with version 8.

[glenns]

I just took the iso made with version 8 for World war Z and tried it in version 9 ripper and it still stopped converting the side by side at 7% so its the ripper in version 9.Anyway version 8 worked fine and made the side by side.

[Wilson.Wang]

71m 11.17s: info: stream input@ Audio(4352)[codec(dca) channels(8) sample(48000) bitrate(0) bitdepth(24) opcode(compress)]
71m 11.18s: info: stream output Audio(4352)[codec(aac) channels(2) sample(48000) bitrate(128000) bitdepth(16)]
71m 11.18s: info: stream input@ Audio(4356)[codec(ac3) channels(6) sample(48000) bitrate(640000) bitdepth(0) opcode(compress)]
71m 11.20s: info: stream output Audio(4356)[codec(aac) channels(2) sample(48000) bitrate(128000) bitdepth(16)]

Hi,
Please convert audio to ac3 or audiocopy, m2ts format does not support to output aac audio.

Wilson

[Wilson.Wang]

Here is a screen shot for Flying swords of the dragon gate you see where the decoder/encoder trips up.Left picture clear right picture not fully formed.No setting in skip over bad sectors in software helps skip over bad frame on one side i even set it for 9 re try's.

Please tried in V9 and see the result.
Please post log file if it's still reproduced in V9. And better to give us the purchase link.

Wilson

[glenns]

Hi Wilson:
(Hi,
Please convert audio to ac3 or audiocopy, m2ts format does not support to output aac audio. )

In newest version 9 theirs no setting for 3d audiocopy that profile is what i always use and have it set as default in older versions of version 9.

The new version 9 has aac as default audio.I changed it to Raw audio I believe this to be the correct setting to get 3d m2ts audio copy to work.In older versions of 9 their was no separate audio setting other than m2ts audio copy as a profile so this is confusing as I would think that your old default should carry over from one version 9 to the newest version 9 with my default being 3d m2ts audiocopy.

I will post again latter to tell you my new results i am converting now.Also on the Flying swords of the dragon gate give me more time with the new settings and I will post again.

[glenns]

I found the audio copy setting in advanced settings and checked it but as I said the profile 3d m2ts audio copy didn't carry over to the newest Fab version 9 as the box for audio copy should be checked but wasn't.I deleted my old profile and made a new one hopefully the the box with a red check mark in it now will stay checked so it doesn't have to be reset every time.