BD Ripper (3D Plus) Converting to 3D file always stalls.

[Ripper75]

So I'm trying out 9.1.1.5 before i decide whether or not I want to buy. I ripped all my 3D movies over the course of 3 days (28 movies) so I can have them on an external HDD hooked up to my blu-ray player.

I managed to convert 4 movies without any issues, but now, every movie I try pretty much stops responding after almost 2 minutes. Frame rates usually get up to around 26.30 fps, then around 01:50, they start to drop until they hit zero, and just stay there. I will attempt again, and post a log, as the last attempt crashed the PC completely and didn't produce a log file.

If it helps, I'm running a Windows 7 64-bit with an AMD Phenom II 1090T 6 core, 8 GB RAM.

[Ripper75]

Ok...once the fps reach zero, I cancel the rip because it never goes up again, it just crashes the program completely now, so I can't even get a log file. Don't think I'll be dropping $300 for a program that doesn't work right.

[GregiBoy]

Have you tried turning off all the GPU stuff?

[Ripper75]

Have you tried turning off all the GPU stuff?

Yep. Always have it turned off

[CBR929]

Hi Ripper75
Log files are always generated, they will be in your documents folder.
You could also try disabling lightning recoding also.
CBR929

[Ripper75]

Yeah...didn't realize that it just keeps adding to the same log file, smh. Turned off lightning recoding and trying again. If it fails, will post the log.

[Ripper75]

Well, it failed again...and crashed the program. I'm getting very annoyed. I've tried various versions of this program in the past and always have problems with it, one form or another. I notice that there's an error in the log, but haven't a clue what's causing it. Maybe there's an issue with my PC?

[glenns]

133m 10.11s: info: stream output Audio(4352)[codec(ac3) channels(6) sample(48000) bitrate(448000) bitdepth(16)]

Change your audio to acc in the mp4 profiles advanced settings or use a different 3d profile that works with the device your going to use the movie with such as MKV 3d or m2ts 3d.

[Ripper75]

133m 10.11s: info: stream output Audio(4352)[codec(ac3) channels(6) sample(48000) bitrate(448000) bitdepth(16)]

Change your audio to acc in the mp4 profiles advanced settings or use a different 3d profile that works with the device your going to use the movie with such as MKV 3d or m2ts 3d.

Not sure why that would matter though, since the 4 that worked were all done with ac3. My blu-ray player, or tv for that matter won't play back aac in 5.1, which is why I chose ac3, but I'll try it again.

[glenns]

I think you should check the box in advanced setting for mp4 profile (copy audio same as source).

Ac3 sound is not supported in the mp4 container it's not part of it's spec.

Why don't you try the m2ts or mkv 3d profiles?

[Ripper75]

I'm ripping one in .mkv now and it seems to be working (90%). I'll also try the copy audio stream option for mp4 as a trial to see what happens. Thanks for your help.

EDIT: Despicable Me still causes crashing, but I was able to rip Dredd. Going to attempt to rip DM right from the disc instead of ISO (which I know isn't recommended).

[glenns]

I tried Despicable me 2 3d iso on hard drive to mp4 with audio same as source and got no sound at all.


DVDFab 9.1.1.9 (2013/12/26 18:33:12)

0m 00.08s: Start preload dll...
0m 00.10s: Load dll successful.
0m 00.10s: Start load fabplay dll...
0m 00.15s: Load fabplay dll successful.
0m 00.15s: Transfer settings successful.
0m 00.15s: info: fabcheck logpath= C:\Users\Glenn\Documents\DVDFab9\Log\
0m 00.15s: fab_check_gpu is running ...
0m 00.21s: fab_check_gpu run successful
0m 00.21s: info: recommand= 851968, Shrink support= 1, enable= 1, cuda_cap= 0 , cpu_count= 8
0m 00.21s: GPUAccelerate: 851973
0m 00.22s: GPUAccelerate setting: 851968, 851968
0m 00.22s: CUDA cap: 0
0m 00.22s: Support coreavc decode: 0
0m 00.22s: Lighting shrink status: 1, 1
0m 00.22s: Graphics info: Intel(R) HD Graphics 4000 : :
0m 00.22s: Load config successful.
0m 00.22s: Windows os type is: 13.
0m 00.27s: Parse string is: 1:1314749059
0m 00.27s: Parse string is: 20:8263532095
0m 00.27s: Parse string is: 21:8260762964
0m 00.27s: Parse string is: 22:8260762964
0m 00.27s: Parse string is: 70:8260762964
0m 00.27s: Parse string is: 50:8260762964
0m 00.27s: Parse string is: 11:8260762964
0m 00.27s: Parse string is: OV:9119
0m 00.27s: Parse string is: BV:9118
0m 00.27s: Parse string is: S:620beec87c67562157f366b3b2ab33ba
0m 00.27s: Option check status: Local
0m 00.27s: HD Decrypter-1-0-215811
0m 00.27s: DVD to DVD (Gold)-0-1-2011831
0m 00.27s: DVD to DVD-1-0-215811
0m 00.27s: DVD to Mobile-1-1-22311011
0m 00.27s: Blu-ray to Blu-ray-1-1-22311011
0m 00.27s: Blu-ray to Mobile-1-1-22311011
0m 00.27s: File to Mobile-1-1-22311011
0m 00.27s: Blu-ray to DVD-1-0-215811
0m 00.27s: File to DVD-1-0-215811
0m 00.27s: File to Blu-ray-1-0-215811
0m 00.27s: File Mover-1-0-215811
0m 00.27s: Blu-ray to 3D-1-1-22311011
0m 00.27s: 2D to 3D-1-1-22311011
0m 00.27s: Blu-ray Decrypt-1-0-200011
0m 00.27s: DVD Decrypt-1-0-200011
0m 00.27s: Start get sys number.
0m 00.27s: connect 0 : start.
0m 00.27s: Serial number is: d4-3d-7e-b4-62-42
0m 00.27s: Reg URL link is:
0m 00.27s: Init GPU settings successful.
0m 00.27s: Version is: 9119
0m 00.27s: CommmandLine:
0m 00.27s: Product is: 2
0m 00.27s: Connect type is: 0
0m 00.36s: Begin init preview play engine.
0m 00.37s: Init DirectShow engine successful.
0m 00.55s: Burn engine: start init.
0m 00.66s: Burn engine: type-2.
0m 00.66s: Burn engine: 0- D:\ [HL-DT-ST BD-RE WH14NS40 1.01 (Ide)].
0m 00.66s: Burn engine: 1- F:\ [HL-DT-ST BD-RE WH14NS40 1.01 (Usb)].
0m 00.66s: Burn engine: end init.
0m 00.80s: Times of connecting error is: 0
0m 00.80s: Parse string is: 1:1314749059
0m 00.80s: Parse string is: 20:8263532095
0m 00.80s: Parse string is: 21:8260762964
0m 00.80s: Parse string is: 22:8260762964
0m 00.80s: Parse string is: 70:8260762964
0m 00.80s: Parse string is: 50:8260762964
0m 00.80s: Parse string is: 11:8260762964
0m 00.80s: Parse string is: OV:9119
0m 00.80s: Parse string is: BV:9118
0m 00.80s: Parse string is: S:d901d9019ae3a8027af2ff1179933f9b
0m 00.80s: Option check status: NewWork
0m 00.80s: HD Decrypter-1-0-215811
0m 00.81s: DVD to DVD (Gold)-0-1-2011831
0m 00.81s: DVD to DVD-1-0-215811
0m 00.81s: DVD to Mobile-1-1-22311011
0m 00.81s: Blu-ray to Blu-ray-1-1-22311011
0m 00.81s: Blu-ray to Mobile-1-1-22311011
0m 00.81s: File to Mobile-1-1-22311011
0m 00.81s: Blu-ray to DVD-1-0-215811
0m 00.81s: File to DVD-1-0-215811
0m 00.81s: File to Blu-ray-1-0-215811
0m 00.81s: File Mover-1-0-215811
0m 00.81s: Blu-ray to 3D-1-1-22311011
0m 00.81s: 2D to 3D-1-1-22311011
0m 00.81s: Blu-ray Decrypt-1-0-200011
0m 00.81s: DVD Decrypt-1-0-200011
0m 00.99s: Init setting page successful.
0m 01.26s: connect 0 : 1:1-10:1-11:1-12:1-13:1-14:1-15:1-
0m 01.34s: Profile Manager :: End Load Profile
0m 01.79s: Init driveX with I/O mode: 0
0m 01.80s: Init driveX with I/O mode: 0
0m 01.80s: Init driveX with I/O mode: 0
0m 01.80s: Init driveX with I/O mode: 0
0m 01.80s: Init driveX with I/O mode: 0
0m 01.80s: Init driveX with I/O mode: 0
0m 01.82s: opening drive E
0m 02.02s: opened i/o
0m 02.06s: opening drive G
0m 02.06s: opened i/o
0m 02.06s: got media type 16
0m 02.09s: got max lba 12749311
0m 02.13s: got disc type 20
0m 02.13s: type Blu-ray BDMV
0m 02.13s: volume label DM23D_NA
0m 06.72s: opening drive D
0m 06.73s: opened i/o
0m 06.74s: opening drive E
0m 06.76s: opened i/o
0m 06.76s: opening drive F
0m 06.79s: opened i/o
0m 06.81s: opening drive G
0m 06.81s: opened i/o
0m 06.81s: got media type 16
0m 06.83s: got max lba 12749311
0m 06.86s: got disc type 20
0m 06.86s: type Blu-ray BDMV
0m 06.86s: volume label DM23D_NA
0m 06.86s: opening drive H
0m 06.86s: opened i/o
0m 06.86s: opening drive K
0m 06.86s: opened i/o
0m 06.87s: Open blu-ray disc expired time: 22311011
0m 06.87s: internal path G:/BDMV/
0m 06.88s: aacs 0 bd+ 0
0m 06.94s: got bdmv
0m 07.11s: movie name: despicable me 2 3d||dm23d_na
0m 07.37s: got bdmv
0m 08.75s: got extended bdinfo
0m 08.75s: opened blu-ray
0m 23.41s: ========WorkAttr::SetSource=======
0m 23.41s: Source Video Size Original : 1920 x 1040
0m 23.41s: Source Video Size Display : 1920 x 1040
0m 23.41s: Source Video FPS : 24000 / 1001
0m 23.41s: Source Video Bitrate : 1200
0m 23.41s: Source Audio Bitrate : 0
0m 23.41s: Source Audio Channels : 6
0m 23.41s: Source Audio Volume : 100
0m 23.41s: Work Profile : 3D MP4
1m 58.58s: UILog:OnMsgToolbar_Start
1m 58.59s: UILog:Msg Start : ready start
1m 58.60s: UILog:Msg Start : start test run work
1m 58.62s: UILog:right button to null, work falg = -1
1m 58.62s: UILog:Msg Start : run work
1m 58.62s: UILog:Run current Work.
1m 58.74s: UILog:Begin work ripper.
1m 58.74s: UILog:Begin work copy or converter.
1m 58.74s: Start check Blu-ray Ripper (3D Plus) register status.
1m 58.74s: End check Blu-ray Ripper (3D Plus) register status: Enable
1m 58.74s: UILog:start running at thread.
1m 58.75s: UILog:return flag at start running at thread ok.
1m 58.76s: OPList at BD Ripper : (4113.2),(4352.1),(4608.32)
1m 58.76s: Blu-ray ripper (3D Plus) check watermark flag: 0
1m 59.12s: ------------------ convert work begin(1/1) ------------------
1m 59.12s: info: create config(bluray2video)
1m 59.12s: info: use profile(3D MP4)
1m 59.12s: info: bluray playlist(800),angle(0),chapter(1->21),BDAV(no)
1m 59.12s: info: 3D working_mode(bluray_3D), 3D format(sbs_lef_right)
1m 59.13s: info: stream input@ Video(4113)[codec(h264) size(1920*1080) fps(24000/1001) interlace(0) opcode(compress)]
1m 59.13s: info: perset file config OK !
1m 59.13s: info: set output video frame_rate(24000/1001)
1m 59.13s: info: stream output Video(4113)[codec(h264) size(1920*1040) fps(24000/1001) interlace(0)]
1m 59.14s: info: stream input@ Audio(4352)[codec(dca) channels(6) sample(48000) bitrate(0) bitdepth(24) opcode(remove_hd)]
1m 59.14s: info: stream output Audio(4352)[codec(dca) channels(6) sample(48000) bitrate(0) bitdepth(24)]
1m 59.17s: info: stream input@ SubPicture(4608)[codec(pgssub) language(English) opcode(remux)]
1m 59.17s: info: stream output SubPicture(4608)[codec(dvdsub) language(English)]
1m 59.17s: info: SubMode(Remux) -- Display Only forced Subtitle(false)
1m 59.18s: UILog:MsgWork:WorkStatus_Start
1m 59.19s: Intel GPU acceleration for video encoding enabled
1m 59.20s: info: h264_encode: encode param profile(1) level(40) bitrate(7182) crf(-1)
1m 59.61s: info: processing source(00800.ssif)
45m 49.87s: ------------------ convert work finished ------------------
45m 50.89s: UILog:MsgWork:current work finish : 3
45m 50.89s: UILog:Run Work to end.

[Ripper75]

I updated the firmware on my blu-ray drive, which might have been the issue. Currently ripping a 3D movie that I haven't been able to rip since I bought it, so will try to re-rip Despicable Me again. Maybe the previous firmware was corrupted somehow. As for the one you ripped, are you playing it back on your PC or through your Blu-ray player? I find that copying the audio source will make a file to appear to have no audio on the PC, but will have audio on the blu-ray player.

[geilee]

I tried Despicable me 2 3d iso on hard drive to mp4 with audio same as source and got no sound at all.

This is a known issue, our developers are trying to fix it. Thank you for your feedback

[geilee]

Hi,Ripper75
It's worked fine for me, I guess that may be your .iso file is damaged.
Please create the iso file again or use physics disc and have a try!