Announcement

Collapse
No announcement yet.

Need Help with "Process Failed" during 3D BD rip of TRON Legacy

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    BD Ripper (3D Plus) Need Help with "Process Failed" during 3D BD rip of TRON Legacy

    When trying to rip the 3D version of TRON Legacy, I get the Process Failed message at about 65% completion. Per suggestion from another post I made, I tried ripping with CUDA on and CUDA off, but got the same results. This has happened with other BD in 2D mode. Appreciate any help you can give. Thanks!

    Profile settings are as follows:

    Profile: 3D MKV
    ADvanced Settings:
    Video
    Codec: H264
    Resolution: 1920x1080
    Encoding Method: High Quality encoding
    Video Quality: High quality
    Frame rate: Same as source
    Split: No split

    Audio
    Codec: AC3
    Channels: 5.1 Multichannel
    Sample Rate: 48000 Hz
    Bit Rate: 448 kbps
    Volume: 100%

    Subtitle
    Mode: Remux into file
    PGS Subtitle

    3D
    Split Screen
    Left\Right(Full Size 100%)

    The DVD Internal Log is as follows:
    (It's one big log and I'm not sure how to separate it, but this is my best shot)
    (OK - the log was too big to fit in this post, so I included as much as I could fit, from the bottom up.)



    720m 56.65s: ------------------ convert work begin(1/1) ------------------
    720m 56.66s: info: create config(dvd2video)
    720m 56.66s: info: use profile(MKV.Default)
    720m 56.67s: info: dvd playlist(1),angle(0),chapter(1->13)
    720m 56.67s: info: 3D working_mode(disable), 3D format(sbs_lef_right)
    720m 57.63s: info: stream input@ Video(480)[codec(mpeg2video) size(720*480) fps(30000/1001) interlace(1) duration(0)sec opcode(compress)]
    720m 57.63s: info: perset file config OK !
    720m 57.64s: info: set output video frame_rate(30000/1001)
    720m 57.65s: info: stream output Video(480)[codec(h264) size(636*274) fps(30000/1001) interlace(1) bitrate(1301) duration(0)sec]
    720m 57.65s: info: stream input@ Audio(129)[codec(ac3) channels(6) sample(48000) bitrate(448000) bitdepth(16) opcode(compress)]
    720m 57.66s: info: stream output Audio(129)[codec(ac3) channels(2) sample(48000) bitrate(192000) bitdepth(16)]
    720m 57.66s: info: stream input@ SubPicture(32)[codec(dvdsub) language(English) opcode(remux)]
    720m 57.67s: info: stream output SubPicture(32)[codec(dvdsub) language(English)]
    720m 57.67s: info: SubMode(Remux) -- Display Only forced Subtitle(false)
    720m 57.70s: UILog:MsgWork:WorkStatus_Start
    720m 58.97s: info: h264_encode: encode param profile(2) level(41) bitrate(1301) crf(-1)
    729m 50.51s: info: audio_decode finish job
    729m 57.99s: fifo stream decreased from 67d5000 to 4de0000
    729m 58.02s: info: h264_encode: encode param profile(2) level(41) bitrate(1301) crf(-1)
    746m 55.45s: info: audio_decode finish job
    747m 11.82s: audio_encode finish job
    749m 33.05s: ------------------ convert work finished ------------------
    749m 35.08s: UILog:MsgWork:current work finish : 3
    749m 35.09s: UILog:Run Work to end.
    777m 05.55s: DriveX msg: remove media in driveX F.
    777m 58.78s: opening drive F
    777m 58.84s: opened i/o
    777m 58.85s: got media type 15
    777m 59.35s: got max lba 24405119
    778m 00.17s: got disc type 20
    778m 00.18s: type Blu-ray BDMV
    778m 00.18s: volume label TRON_LEGACY_3D
    778m 00.19s: DriveX msg: add media in driveX F.
    778m 00.19s: DriveX msg: send open media msg to thread for driveX F.
    778m 00.19s: Source manager: add source id 7.
    778m 00.21s: Open blu-ray disc expired time: 22311011
    778m 00.21s: internal path F:/BDMV/
    778m 00.23s: aacs 1 bd+ 0
    778m 01.91s: got bdmv
    778m 02.28s: movie name: tron legacy 3d||tron_legacy_3d
    778m 02.28s: got agid 0
    778m 02.30s: sent host cert chal
    778m 02.30s: got drive cert chal
    778m 02.30s: BEC 1
    778m 02.31s: DRIVE_VENDOR 0x0073
    778m 02.33s: got drive key
    778m 02.33s: got host key signature
    778m 02.33s: verified drive signature
    778m 02.33s: verified host signature
    778m 02.36s: sent host signature and key point
    778m 02.36s: got bus key
    778m 02.36s: got volume id
    778m 02.36s: got volume id mac
    778m 02.36s: volume id is correct
    778m 02.37s: got vid
    778m 02.80s: blu-ray 389988E08AE635C18A49474DBEECBFD695A00C2F
    778m 03.96s: cert BEE=0x00 same
    778m 05.44s: D 7369671C
    778m 05.46s: main playlist 00070.mpls
    778m 05.46s: selected region A
    778m 05.46s: got vuk
    778m 05.77s: got unit key 1
    778m 20.53s: got bdmv
    778m 28.62s: stream(27,3,0)/clip(27,3,6) infos are not the same, using clip info to regulate it.
    778m 29.83s: got extended bdinfo
    778m 29.83s: opened blu-ray
    778m 29.98s: Source manager: open successful.
    778m 30.25s: Work manager: create Ripper work 7 with source 7 and uiinfo 7( title 70 ).
    778m 32.38s: ========WorkAttr::SetSource=======
    778m 32.38s: Source Video Size Original : 1920 x 1080
    778m 32.39s: Source Video Size Display : 1920 x 1080
    778m 32.39s: Source Video FPS : 24000 / 1001
    778m 32.39s: Source Video Bitrate : 1200
    778m 32.39s: Source Audio Bitrate : 0
    778m 32.39s: Source Audio Channels : 8
    778m 32.39s: Source Audio Volume : 100
    778m 32.39s: Work Profile : MKV.Default
    780m 36.33s: Work manager: create Ripper work 8 with source 7 and uiinfo 7( title 70 ).
    780m 36.33s: ========WorkAttr::SetSource=======
    780m 36.33s: Source Video Size Original : 1920 x 1080
    780m 36.33s: Source Video Size Display : 1920 x 1080
    780m 36.33s: Source Video FPS : 24000 / 1001
    780m 36.33s: Source Video Bitrate : 1200
    780m 36.33s: Source Audio Bitrate : 0
    780m 36.33s: Source Audio Channels : 8
    780m 36.33s: Source Audio Volume : 100
    780m 36.33s: Work Profile : 3D MKV
    790m 49.87s: ========WorkAttr::SetSource=======
    790m 49.87s: Source Video Size Original : 1920 x 1080
    790m 49.87s: Source Video Size Display : 1920 x 1080
    790m 49.87s: Source Video FPS : 24000 / 1001
    790m 49.87s: Source Video Bitrate : 1200
    790m 49.87s: Source Audio Bitrate : 0
    790m 49.87s: Source Audio Channels : 8
    790m 49.87s: Source Audio Volume : 100
    790m 49.87s: Work Profile : 3D MKV
    791m 32.35s: ========WorkAttr::SetSource=======
    791m 32.35s: Source Video Size Original : 1920 x 1080
    791m 32.35s: Source Video Size Display : 1920 x 1080
    791m 32.35s: Source Video FPS : 24000 / 1001
    791m 32.36s: Source Video Bitrate : 1200
    791m 32.36s: Source Audio Bitrate : 0
    791m 32.36s: Source Audio Channels : 8
    791m 32.36s: Source Audio Volume : 100
    791m 32.36s: Work Profile : 3D MKV
    804m 21.10s: UILog:OnMsgToolbar_Start
    804m 21.10s: UILog:Msg Start : ready start
    804m 21.10s: UILog:Msg Start : start test run work
    804m 21.11s: UILog:Msg Start : run work
    804m 21.11s: UILog:Run current Work.
    804m 21.11s: UILog:Begin work ripper.
    804m 21.11s: UILog:Begin work copy or converter.
    804m 21.11s: Start check Blu-ray Ripper (3D Plus) register status.
    804m 21.11s: End check Blu-ray Ripper (3D Plus) register status: Enable
    804m 21.11s: UILog:start running at thread.
    804m 21.12s: UILog:return flag at start running at thread ok.
    804m 21.14s: OPList at BD Ripper : (4113.2),(4352.2),(4608.32)
    804m 21.14s: Blu-ray ripper (3D Plus) check watermark flag: 0
    804m 21.14s: ------------------ convert work begin(1/1) ------------------
    804m 21.14s: info: create config(bluray2video)
    804m 21.15s: info: use profile(3D MKV)
    804m 21.15s: info: bluray playlist(70),angle(0),chapter(1->21),BDAV(no)
    804m 21.15s: info: 3D working_mode(bluray_3D), 3D format(sbs_lef_right)
    804m 21.16s: info: stream input@ Video(4113)[codec(h264) size(1920*1080) fps(24000/1001) interlace(0) duration(0)sec opcode(compress)]
    804m 21.16s: info: perset file config OK !
    804m 21.16s: info: set output video frame_rate(24000/1001)
    804m 21.16s: info: stream output Video(4113)[codec(h264) size(3840*1080) fps(24000/1001) interlace(0) bitrate(12430) duration(0)sec]
    804m 21.17s: info: stream input@ Audio(4352)[codec(dca) channels(8) sample(48000) bitrate(0) bitdepth(24) opcode(compress)]
    804m 21.17s: info: stream output Audio(4352)[codec(ac3) channels(6) sample(48000) bitrate(448000) bitdepth(16)]
    804m 21.17s: info: stream input@ SubPicture(4608)[codec(pgssub) language(English) opcode(remux)]
    804m 21.17s: info: stream output SubPicture(4608)[codec(pgssub) language(English)]
    804m 21.17s: info: SubMode(Remux) -- Display Only forced Subtitle(false)
    804m 21.20s: UILog:MsgWork:WorkStatus_Start
    804m 22.23s: shared fifo stream decreased from b1fb000 to 857d000
    804m 22.23s: shared fifo stream decreased from 857d000 to 58ff000
    804m 22.23s: warning: h264 encode macroblocks per second(388411) exceed the standard(245760), video size(3840x1080, 23.976), specify profile(2)-level(41)
    804m 22.24s: info: h264_encode: encode param profile(1) level(50) bitrate(12430) crf(-1)
    804m 27.33s: info: processing source(00228.ssif)
    858m 57.73s: info: processing source(00226.ssif)
    909m 44.38s: shared fifo stream decreased from b1fb000 to 857d000
    909m 44.38s: shared fifo stream decreased from 857d000 to 58ff000
    909m 44.38s: warning: h264 encode macroblocks per second(388411) exceed the standard(245760), video size(3840x1080, 23.976), specify profile(2)-level(41)
    909m 44.38s: info: h264_encode: encode param profile(1) level(50) bitrate(12430) crf(-1)
    909m 52.50s: info: processing source(00228.ssif)
    946m 19.21s: error: filter name(bd_demux), type(1), id(26), get std_exception(bad allocation)
    947m 08.67s: error: Work 1 failed, Error = control graph control_filter_error error: filter name(bd_demux), type(1), id(26), get std_exception(bad allocation)


    947m 08.67s: ------------------ convert work failed ------------------
    947m 09.77s: UILog:MsgWork:current work finish : 2
    947m 09.78s: UILog:Run Work to end.
    952m 03.00s: UILog:OnMsgToolbar_Start
    952m 03.01s: UILog:Msg Start : ready start
    952m 03.01s: UILog:Msg Start : start test run work
    952m 03.05s: UILog:Msg Start : run work
    952m 03.05s: UILog:Run current Work.
    952m 03.05s: UILog:Begin work ripper.
    952m 03.05s: UILog:Begin work copy or converter.
    952m 03.05s: Start check Blu-ray Ripper (3D Plus) register status.
    952m 03.06s: End check Blu-ray Ripper (3D Plus) register status: Enable
    952m 03.06s: UILog:start running at thread.
    952m 03.06s: UILog:return flag at start running at thread ok.
    952m 03.08s: OPList at BD Ripper : (4113.2),(4352.2),(4608.32)
    952m 03.10s: Blu-ray ripper (3D Plus) check watermark flag: 0
    952m 06.40s: ------------------ convert work begin(1/1) ------------------
    952m 06.40s: info: create config(bluray2video)
    952m 06.40s: info: use profile(3D MKV)
    952m 06.41s: info: bluray playlist(70),angle(0),chapter(1->21),BDAV(no)
    952m 06.41s: info: 3D working_mode(bluray_3D), 3D format(sbs_lef_right)
    952m 06.43s: info: stream input@ Video(4113)[codec(h264) size(1920*1080) fps(24000/1001) interlace(0) duration(0)sec opcode(compress)]
    952m 06.43s: info: perset file config OK !
    952m 06.43s: info: set output video frame_rate(24000/1001)
    952m 06.43s: info: stream output Video(4113)[codec(h264) size(3840*1080) fps(24000/1001) interlace(0) bitrate(12430) duration(0)sec]
    952m 06.44s: info: stream input@ Audio(4352)[codec(dca) channels(8) sample(48000) bitrate(0) bitdepth(24) opcode(compress)]
    952m 06.45s: info: stream output Audio(4352)[codec(ac3) channels(6) sample(48000) bitrate(448000) bitdepth(16)]
    952m 06.45s: info: stream input@ SubPicture(4608)[codec(pgssub) language(English) opcode(remux)]
    952m 06.45s: info: stream output SubPicture(4608)[codec(pgssub) language(English)]
    952m 06.45s: info: SubMode(Remux) -- Display Only forced Subtitle(false)
    952m 06.48s: UILog:MsgWork:WorkStatus_Start
    952m 07.51s: shared fifo stream decreased from b1fb000 to 857d000
    952m 07.51s: shared fifo stream decreased from 857d000 to 58ff000
    952m 07.52s: warning: h264 encode macroblocks per second(388411) exceed the standard(245760), video size(3840x1080, 23.976), specify profile(2)-level(41)
    952m 07.52s: info: h264_encode: encode param profile(1) level(50) bitrate(12430) crf(-1)
    952m 12.62s: info: processing source(00228.ssif)
    1006m 47.49s: info: processing source(00226.ssif)
    1058m 20.90s: shared fifo stream decreased from b1fb000 to 857d000
    1058m 20.90s: shared fifo stream decreased from 857d000 to 58ff000
    1058m 20.90s: warning: h264 encode macroblocks per second(388411) exceed the standard(245760), video size(3840x1080, 23.976), specify profile(2)-level(41)
    1058m 20.90s: info: h264_encode: encode param profile(1) level(50) bitrate(12430) crf(-1)
    1058m 28.99s: info: processing source(00228.ssif)
    1096m 13.95s: error: filter name(bd_demux), type(1), id(26), get std_exception(bad allocation)
    1098m 45.20s: error: Work 1 failed, Error = control graph control_filter_error error: filter name(bd_demux), type(1), id(26), get std_exception(bad allocation)


    1098m 45.20s: ------------------ convert work failed ------------------
    1098m 46.28s: UILog:MsgWork:current work finish : 2
    1098m 46.29s: UILog:Run Work to end.

    #2
    I saw the resolution was out put in 3840*1080 from log.
    Was that a input mistake? Tried to choosed a correct resoluton option.
    Tell us the results.
    User Manual for DVDFab v10 (pdf)

    DVDFab log default location:
    For Windows: C:\Users\User Name\Documents\DVDFab10\Log
    For Mac: Finder> Documents> DVDFab10> Log

    DVDFab Player 5:
    For Windows:C:\Users\User Name\Documents\DVDFab Player 5\Log

    Comment


      #3
      Ok - I see that. I wonder if it's because I set the 3D to split screen with left/right at Full size-100%? I'll try setting it at 50%.

      Thanks for the tip. I'll report back tomorrow how it goes.

      Comment


        #4
        Hey Dora! your suggestion worked! when I changed the format to L/R 50% it recorded just fine. Now comes the issue of trying to get it to work thru Plex to my 3D Projector.

        Again, THANKS!!!

        Comment

        Working...
        X