BD Ripper (3D Plus) Subtitles distorted everytime

[jbora]

Sorry if this has been brought up but I can't find the solution anywhere in this forum.

I have been slowly converting my blu-ray library to mkv using "Blu-ray Ripper." Unfortunately, I have noticed that every single movie I rip that requires English subtitles for foreign parts is coming out with distorted subtitles. I have tried all possible subtitles available and have tried ripping with just "normal" selected, just "forced" selected, and "normal and forced" selected with the same result every time.

The subtitles are there but they either pop-up for only a split second or not at all. What's really weird is if I rewind the movie to watch a particular foreign language part again, sometimes subtitles will pop up that play through that didn't appear before. I started noticing this months ago and the updates since then have not helped at all. My current solution is to download the subtitles from a different websites and mux them in myself. It would be great though if I didn't have to do this every time. Any insight you guys could provide would be really helpful.

If it matters, I experience this problem when I test the movie in VLC and when I try to watch it on my Oppo BDP-103D.

I have uploaded the internal log for Distrct 9, X-Men first class, and Jack Ryan Shadow Recruit.

I should also mention that for some reason when I ripped "Lone Survivor" the subtitles came through fine.

Thanks guys

[CBR929]

Hi jbora
Your using an older version of Fab, please try the latest version found here http://forum.dvdfab.cn/showthread.php?t=25364

Note if your in the US make sure to install this newer version in its on folder and not over the top of this version 9146 give this a read through http://forum.dvdfab.cn/showthread.ph...996#post163996
CBR929

[Ning]

Hi jbora, I have reproduced your problem and forwarded to developers.

Thank you very much for your feedback.

[Molok]

I have exactly the same problem. I haven't so far managed to have the subpictures working with Ripper and the MKV profile. I'm running the latest version 9157. I'm outside US (region B). Looking forward for a fix.

[CBR929]

Hi Molok
The latest version is 9158 found here http://forum.dvdfab.cn/showthread.php?t=25541, give it a try.
If still having problems post your internal log, thanks.
CBR929

[Molok]

9158 didn't solve the subpicture problem.

Here is the log.

DVDFab 9.1.5.8 (2014/07/23 10:25:41)

0m 00.15s: Init Public log : enabled.
0m 00.15s: Init Private log : finish.
0m 00.15s: App info: 2014-7-19
0m 00.15s: App info: 9.1.5.8 9158 Beta
0m 00.18s: Init CrashReportSettings : enabled.
0m 00.18s: Init DVDInfo_Log : enabled.
0m 00.18s: Init Qt_Log : disabled.
0m 00.47s: Profile Manager :: Begin Load Profile
0m 00.48s: Qt Translator file load success
0m 00.48s: App info: client type 2.
0m 00.48s: Init process: Transfer settings successful.
0m 00.48s: warning: FabPlay: invalid gpu detect handle
0m 00.48s: GPU check: GPUAccelerate-0
0m 00.48s: GPU check: GPUAccelerate setting-0, 0
0m 00.48s: GPU check: CUDA cap-0
0m 00.48s: GPU check: Support coreavc decode-0
0m 00.48s: GPU check: Lighting shrink status-0, 0
0m 00.49s: Init process: Load config successful.
0m 00.49s: Init process: Windows os type is 64bit System Windows 7.
0m 00.49s: Init process: command line in is /install /language "Swedish"
0m 00.72s: Install Update Language: language file is C:/Program Files (x86)/DVDFab 9/QLanguage/FabQt_SVE.qm .
0m 00.74s: Init process: install process.
0m 02.40s: Profile Manager :: End Load Profile
0m 00.01s:

[Molok]

Here is more.

DVDFab 9.1.5.8 (2014/07/23 10:25:50)

0m 00.02s: Init Public log : enabled.
0m 00.02s: Init Private log : finish.
0m 00.02s: App info: 2014-7-19
0m 00.02s: App info: 9.1.5.8 9158 Beta
0m 00.02s: Init CrashReportSettings : disabled.
0m 00.02s: Init DVDInfo_Log : enabled.
0m 00.02s: Init Qt_Log : disabled.
0m 00.14s: Profile Manager :: Begin Load Profile
0m 00.14s: Qt Translator file load success
0m 00.14s: App info: client type 2.
0m 00.16s: Fabplay load: preload successful.
0m 00.24s: Fabplay load: Load successful.
0m 00.24s: Init process: Transfer settings successful.
0m 00.24s: info: fabcheck logpath= C:/Users/ägare/Documents/DVDFab9/Log/
0m 00.26s: info: fab_check_gpu is running ...
0m 02.17s: Profile Manager :: End Load Profile
0m 02.47s: info: fab_check_gpu run successful
0m 02.47s: info: recommand= 851968, Shrink support= 1, enable= 1, cuda_cap= 1 , cpu_count= 8
0m 02.47s: GPU check: GPUAccelerate-864317
0m 02.47s: GPU check: GPUAccelerate setting-851968, 851968
0m 02.47s: GPU check: CUDA cap-1
0m 02.47s: GPU check: Support coreavc decode-0
0m 02.47s: GPU check: Lighting shrink status-1, 1
0m 02.47s: GPU check: Graphics info 1: Intel(R) HD Graphics 3000 : :
0m 02.47s: GPU check: Graphics info 2: NVIDIA GeForce GT 540M : 6.0 : 2.1
0m 02.48s: Init process: Load config successful.
0m 02.48s: Init process: Windows os type is 64bit System Windows 7.
0m 02.48s: Init process: command line in is
0m 02.54s: Reg check: Option check status-Failed
0m 02.54s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):0:0 )-( DVD to DVD:0:0 )-( DVD to Mobile:0:0 )-( Blu-ray to Blu-ray:0:0 )-( Blu-ray to Mobile:0:0 )-( File to Mobile:0:0 )-( Blu-ray to DVD:0:0 )-( File to DVD:0:0 )-( File to Blu-ray:0:0 )-( File Mover:1:0 )-( Blu-ray to 3D:0:0 )-( 2D to 3D:0:0 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-
0m 02.54s: App info: language type SVE.
0m 02.54s: Reg check: Start get sys number.
0m 02.57s: Reg check: Serial number is: 74-2f-68-3c-21-9a:14-da-e9-19-e0-ba:74-2f-68-43-12-bc
0m 02.57s: Reg check: Connect type is: 0
0m 03.69s: Reg check: Times of connecting error is: 0
0m 03.69s: Reg check: Parse string: ( 1:8260762964 )( 2:8260762964 )( 11:8260762964 )( 20:8263532095 )( 200:1386700916 )( 21:8260762964 )( 22:8260762964 )( OV:9157 )( BV:9158 )( S:389d97ab5d1c1c44a317cddc3f9d80c8
0m 04.05s: Reg check: thread exit normal.
0m 04.06s: Reg check: Option check status-NewWork
0m 04.06s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):1:1 )-( DVD to DVD:1:1 )-( DVD to Mobile:1:1 )-( Blu-ray to Blu-ray:1:1 )-( Blu-ray to Mobile:1:1 )-( File to Mobile:1:0 )-( Blu-ray to DVD:1:0 )-( File to DVD:1:0 )-( File to Blu-ray:1:0 )-( File Mover:1:0 )-( Blu-ray to 3D:1:1 )-( 2D to 3D:1:0 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-
0m 04.06s: Reg check: connect successful and result code is 1.
0m 04.06s: Reg check: End check info.
0m 04.06s: Export Blu-ray source information report : enabled
0m 04.06s: Init process: Init GPU settings successful.
0m 04.41s: Init preview: Begin init preview play engine.
0m 04.41s: Init preview: Begin init preview play engine(Internal).
0m 04.67s: Init preview: Init internal engine successful.
0m 05.62s: Burn engine: start init.
0m 06.75s: bd set region B
0m 06.75s: Burn engine: engine type-0.
0m 06.75s: Burn engine: writer count 2.
0m 06.75s: Burn engine: 0- E:\ [Slimtype BD E DS4E1S EA2B (Ide)].
0m 06.75s: Burn engine: 1- G:\ [HL-DT-ST BD-RE BP06LU10 HL04 (Usb)].
0m 06.75s: Burn engine: end init.
0m 07.70s: Init process: Init setting page successful.
0m 07.70s: QtLog Mode = false
0m 07.70s: Show ProductsInfo Dlg 2
0m 19.82s: Show UI Step 2
0m 20.22s: Show UI Step 3
0m 20.22s: Start show MainUI.
0m 20.23s: UI manager: switch to Copy mode.

[Molok]

And here comes more.

0m 21.24s: Init process: init main ui successful.
0m 21.28s: Init process: show main ui successful.
0m 21.28s: DriveX msg: Init driveX E with I/O mode: 0
0m 21.28s: DriveX msg: Init driveX G with I/O mode: 0
0m 21.43s: opening drive E
0m 21.44s: opened i/o
0m 21.45s: Source managerpen source flag:1,1,1,1
0m 21.45s: opening drive G
0m 21.47s: opened i/o
0m 21.48s: Source managerpen source flag:1,1,1,1
0m 21.48s: Source managerpen source flag:1,1,1,1
1m 17.78s: UI manager: switch to Converter mode.
2m 18.08s: set folder F:/Mainmovie/Nebraska/BDMV/ with type 2
2m 18.08s: opening folder F:/Mainmovie/Nebraska/BDMV/
2m 18.11s: set folder F:/Mainmovie/Nebraska/BDMV/ with type 2
2m 18.11s: opening folder F:/Mainmovie/Nebraska/BDMV/
2m 18.11s: Source manager: add source id 0.
2m 18.12s: bd set region ?
2m 18.12s: Source open statusVD Yes, 2231-10-11
2m 18.12s: Source open status:BD Yes, 2231-10-11
2m 18.12s: bd set region ?
2m 18.18s: got bdmv
2m 18.24s: movie name: nebraska
2m 18.34s: got extended bdinfo
2m 18.34s: Source manager: open successful.
2m 18.47s: Work manager: create Converter work 0 with source 0 and uiinfo 0( title 0 ).

[Molok]

And more (the last of the log).

2m 19.70s: ========WorkAttr::SetSource=======
2m 19.70s: Source Video Size Original : 1920 x 1080
2m 19.70s: Source Video Size Display : 1920 x 1080
2m 19.70s: Source Video FPS : 24000 / 1001
2m 19.70s: Source Video Bitrate : 1200
2m 19.70s: Source Audio Bitrate : 0
2m 19.70s: Source Audio Channels : 3
2m 19.70s: Source Audio Volume : 100
2m 19.70s: Work Profile : MKV Passthrough
2m 20.21s: Source manager: select video files for open.
2m 20.21s: Source manager: this source is exist, source id 0.
2m 20.21s: Source managerpen source flag:1,1,1,1
3m 41.49s: UILog:OnMsgToolbar_Start
3m 41.49s: UILog:Msg Start : ready start
3m 41.49s: UILog:Msg Start : start test run work
3m 41.50s: UILog:right button to null, work falg = -1
3m 41.50s: UILog:Msg Start : run work
3m 41.50s: UILog:Run current Work.
3m 41.50s: UILog:Begin work Converter.
3m 41.50s: UILog:Begin work copy or converter.
3m 41.50s: Start check Blu-ray Ripper (3D Plus) register status.
3m 41.50s: End check Blu-ray Ripper (3D Plus) register status: Enable
3m 41.51s: UILog:start running at thread.
3m 41.51s: UILog:return flag at start running at thread ok.
3m 41.92s: OPList at BD Converter : (4113.1),(4352.1),(4608.32)
3m 41.92s: Blu-ray Converter (3D Plus) check watermark flag: 0
3m 41.93s: ------------------ convert work begin(1/1) ------------------
3m 41.93s: start fab process

------ fab process working ------
0m 00.11s: set folder F:/Mainmovie/Nebraska/BDMV/ with type 2
0m 00.11s: opening folder F:/Mainmovie/Nebraska/BDMV/
0m 00.11s: bd set region ?
0m 00.12s: got bdmv
0m 00.13s: movie name: nebraska
0m 00.14s: got extended bdinfo
0m 00.14s: info: create config(bluray2video)
0m 00.15s: info: crop value after clone: left = 0 right= 0 top=0 bottom=0 enable=0 mode=0
0m 00.15s: info: use profile(MKV Passthrough)
0m 00.15s: info: bluray playlist(0),angle(0),chapter(1->16),BDAV(no)
0m 00.15s: info: 3D working_mode(disable), 3D format(sbs_lef_right)
0m 00.15s: info: crop value: left = 0 right= 0 top=0 bottom=0 enable=0 mode=0
3m 42.72s: UILog:MsgWork:WorkStatus_Start
0m 00.15s: info: stream input@ Video(4113)[codec(h264) size(1920*1080) fps(24000/1001) interlace(0) duration(0)sec opcode(copy)]
0m 00.16s: info: stream output Video(4113)[codec(h264) size(1920*1080) fps(24000/1001) interlace(0) bitrate(0) duration(0)sec]
0m 00.16s: info: stream input@ Audio(4352)[codec(dca) channels(3) sample(48000) bitrate(0) bitdepth(24) opcode(copy)]
0m 00.16s: info: stream output Audio(4352)[codec(dca) channels(3) sample(48000) bitrate(0) bitdepth(24) opcode(copy)]
0m 00.16s: info: stream input@ SubPicture(4608)[codec(pgssub) language(Swedish) opcode(remux)]
0m 00.16s: info: stream output SubPicture(4608)[codec(pgssub) language(Swedish)]
0m 00.16s: info: SubMode(Remux) -- Display Only forced Subtitle(false)
3m 42.73s: UILog:MsgWork:WorkStatus_Start
0m 00.19s: info: recommand= 851968, Shrink support= 1, enable= 1, cuda_cap= 1 , cpu_count= 8
0m 00.21s: info: processing source(00001.m2ts)
28m 47.37s:
------ fab process exit ------
32m 30.07s: ------------------ convert work finished ------------------
32m 31.30s: UILog:MsgWork:current work finish : 3
32m 31.30s: UILog:Run Work to end.
46m 43.02s: Source managerpen source flag:1,1,1,1
46m 53.49s: Exit process: stop running.