BD Ripper (3D Plus) Audio decode failed

[eisenb11]

I seem to be seeing a lot of Audio Decode Failed errors in my logs since the last 2 versions. Basically since the newer "faster" version came out. Using the disk with 9.1.5.0 seems to work fine.

Also, why does the final status show that the rip was successful if audio decode failed? This should count as a fail.

[Ning]

Hi, please post your internal_dvdfab.log file which contains "audio decode failed" here, thanks.

[eisenb11]

Here is one such log:

213m 37.53s: ------------------ convert work begin(1/1) ------------------
213m 37.53s: start fab process
213m 37.53s: info: create config(bluray2video)
213m 37.54s: info: crop value after clone: left = 0 right= 0 top=0 bottom=0 enable=0 mode=0
213m 37.54s: info: use profile(MKV.Default)
213m 37.54s: info: bluray playlist(0),angle(0),chapter(1->21),BDAV(no)
213m 37.54s: info: 3D working_mode(disable), 3D format(sbs_lef_right)
213m 37.58s: info: stream input@ Video(4113)[codec(h264) size(1920*1080) fps(24000/1001) interlace(0) duration(0)sec opcode(compress)]
213m 37.59s: info: perset file config OK !
213m 37.59s: info: set output video frame_rate(24000/1001)
213m 37.59s: info: stream output Video(4113)[codec(h264) size(1920*1080) fps(24000/1001) interlace(0) bitrate(12430) duration(0)sec]
213m 37.59s: info: stream input@ Audio(4352)[codec(dca) channels(6) sample(48000) bitrate(0) bitdepth(24) opcode(compress)]
213m 37.60s: info: stream output Audio(4352)[codec(ac3) channels(6) sample(48000) bitrate(640000) bitdepth(16) opcode(compress)]
213m 37.60s: info: stream input@ SubPicture(4608)[codec(pgssub) language(English) opcode(remux)]
213m 37.60s: info: stream output SubPicture(4608)[codec(pgssub) language(English)]
213m 37.60s: info: SubMode(Remux) -- Display Only forced Subtitle(false)
213m 37.61s: UILog:MsgWork:WorkStatus_Start
213m 37.61s: info: enable multi-thread software decoder, thread count = 8
213m 37.63s: info: h264_encode: encode param profile(2) level(41) bitrate(12430) crf(-1)
213m 37.65s: info: processing source(00220.m2ts)
265m 29.21s: info: enable multi-thread software decoder, thread count = 8
265m 29.22s: info: h264_encode: encode param profile(2) level(41) bitrate(12430) crf(-1)
265m 32.65s: info: processing source(00220.m2ts)
265m 34.58s: audio decode failed ! (id=dca, pts=1.29067 sec, size=4024)
272m 20.53s: audio decode failed ! (id=dca, pts=872 sec, size=4024)
282m 36.91s: audio decode failed ! (id=dca, pts=2191.7 sec, size=4024)
283m 31.10s: audio decode failed ! (id=dca, pts=2311.05 sec, size=4024)
292m 02.94s: audio decode failed ! (id=dca, pts=3416.42 sec, size=4024)
301m 50.90s: audio decode failed ! (id=dca, pts=4664.49 sec, size=4024)
302m 53.42s: audio decode failed ! (id=dca, pts=4798.12 sec, size=4024)
312m 46.20s: audio decode failed ! (id=dca, pts=6059.56 sec, size=4024)
316m 59.99s: audio decode failed ! (id=dca, pts=6693.66 sec, size=4024)
317m 01.98s: audio decode failed ! (id=dca, pts=6697.41 sec, size=4024)
317m 02.22s: audio decode failed ! (id=dca, pts=6699.36 sec, size=4024)
317m 05.37s: info: audio_decode finish job
317m 05.37s: audio_encode finish job
317m 09.29s: ------------------ convert work finished ------------------

[eisenb11]

Redid the same disc on another PC running 9.1.5.0 and no errors. I've seen this about 4 times now since the recent "faster" version of Fab came out.

It's easy to miss this because the status says "success" after completion. The only way to find it is to search the log for the word "fail" afterwards.

[eisenb11]

Hi, please post your internal_dvdfab.log file which contains "audio decode failed" here, thanks.

Hi there, any updates on this? I'm seeing this error a lot. It used to be pretty rare until the last couple of versions.

[eisenb11]

Hi, please post your internal_dvdfab.log file which contains "audio decode failed" here, thanks.

I think I'm going to have to uninstall this version. I just did 3 disks and 2 had the audio error. Everything worked ok when I used an older version of Fab.

File attached

[90312]

Have a read of this before posting again: http://forum.dvdfab.cn/showthread.php?t=122

Thread closed.