Announcement

Collapse
No announcement yet.

Appcrash on every M2TS on 2nd pass

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Appcrash on every M2TS on 2nd pass

    DVDFab now crashes every time when switching from the first pass to the second. Profile used was generic.mkv.h264.audiocopy but DVDFab crashes on every h264 profile.

    I only use software encoding. Using only 1-pass encoding is not possible since that produces a massive delay between the video and the audio track.

    Code:
    Faulting application name: DVDFab.exe, version: 8.0.7.6, time stamp: 0x4d67cf69
    Faulting module name: avcodec.dll, version: 0.0.0.0, time stamp: 0x4d2a8bc4
    Exception code: 0xc0000005
    Fault offset: 0x0028df29
    Faulting process id: 0x1178
    Faulting application start time: 0x01cbd98753ce4b65
    Faulting application path: C:\Program Files (x86)\DVDFab 8\DVDFab.exe
    Faulting module path: C:\Program Files (x86)\DVDFab 8\avcodec.dll
    Report Id: 35cab4fc-458c-11e0-a818-002618b0c8f7
    Code:
    DVDFab 8.0.7.6 (2011/03/03  10:42:36)
    
     0m 00.78s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
     0m 05.41s: 513.05 : the video size is not the same 0x0 -> 1920x1080
     0m 05.41s: 513.05: get video start offset(1056066)
     0m 44.46s: 513.05 : the video size is not the same 0x0 -> 1920x1080
     0m 44.46s: 513.05: get video start offset(1056066)
     1m 04.75s: 
    
    
    ------  begin mobile work(1/1)  ------
    
    
     1m 04.75s: create config(3)
     1m 04.75s: convert profile(generic.mkv.h264.audiocopy)
     1m 04.77s: 513.05 : the video size is not the same 0x0 -> 1920x1080
     1m 04.77s: 513.05: get video start offset(1056066)
     1m 04.77s:  1m 04.78s: info: set output video frame_rate(23/1)
     1m 04.80s: using software decoder(h264 multi-thread)
     1m 05.81s: h264_encode: encode param profile(2) level(40) bitrate(12213)
    126m 02.88s: using software decoder(h264 multi-thread)
    126m 02.89s: h264_encode: encode param profile(2) level(40) bitrate(12213)
    Code:
    General
    ID                               : 1 (0x1)
    Complete name                    : D:\inception.m2ts
    Format                           : BDAV
    Format/Info                      : Blu-ray Video
    File size                        : 22.2 GiB
    Duration                         : 2h 28mn
    Overall bit rate                 : 21.4 Mbps
    Maximum Overall bit rate         : 35.5 Mbps
    
    Video
    ID                               : 4113 (0x1011)
    Menu ID                          : 1 (0x1)
    Format                           : AVC
    Format/Info                      : Advanced Video Codec
    Format profile                   : High@L4.1
    Format settings, CABAC           : Yes
    Format settings, ReFrames        : 2 frames
    Format settings, GOP             : M=1, N=25
    Codec ID                         : 27
    Duration                         : 2h 28mn
    Bit rate mode                    : Variable
    Bit rate                         : 19.9 Mbps
    Maximum bit rate                 : 35.0 Mbps
    Width                            : 1 920 pixels
    Height                           : 1 080 pixels
    Display aspect ratio             : 16:9
    Frame rate                       : 23.976 fps
    Color space                      : YUV
    Chroma subsampling               : 4:2:0
    Bit depth                        : 8 bits
    Scan type                        : Progressive
    Bits/(Pixel*Frame)               : 0.401
    Stream size                      : 20.6 GiB (93%)
    Writing library                  : x264 core
    Color primaries                  : BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
    Transfer characteristics         : BT.709-5, BT.1361
    Matrix coefficients              : BT.709-5, BT.1361, IEC 61966-2-4 709, SMPTE RP177
    
    Audio
    ID                               : 4352 (0x1100)
    Menu ID                          : 1 (0x1)
    Format                           : AC-3
    Format/Info                      : Audio Coding 3
    Mode extension                   : CM (complete main)
    Codec ID                         : 129
    Duration                         : 2h 28mn
    Bit rate mode                    : Constant
    Bit rate                         : 640 Kbps
    Channel(s)                       : 6 channels
    Channel positions                : Front: L C R, Side: L R, LFE
    Sampling rate                    : 48.0 KHz
    Bit depth                        : 16 bits
    Compression mode                 : Lossy
    Stream size                      : 678 MiB (3%)
    Language                         : German
    
    Text #1
    ID                               : 4608 (0x1200)
    Menu ID                          : 1 (0x1)
    Format                           : PGS
    Codec ID                         : 144
    Language                         : German
    
    Text #2
    ID                               : 4609 (0x1201)
    Menu ID                          : 1 (0x1)
    Format                           : PGS
    Codec ID                         : 144
    Language                         : German
    No other log files available!

    #2
    Hi wpa1160
    We'll check it,thanks for report,because of some changings,it may be some issue in Video Converter,if have issues,we'll fix asap.
    thanks again
    Joe

    Comment


      #3
      Will this ever be fixed? I have tried to convert several dozen M2TS and MKV files using software-only for decode/encode and it either crashes, never finishes, produces a file full of video glitches, or produces a file with audio/video severely out of sync. I have not had a single successful conversion. There have been times when I think it worked, but half way through a movie there are severe video glitches, or will not allow me to skip/reverse (using SageTV with HD300 media extender), it just freezes or plays audio with no video.

      I've tried every version since January, including betas with no change.

      Thank you.

      Comment


        #4
        Yes, same problem still over here. Either it crashes or sits there for hours doing nothing...

        Comment


          #5
          Hi wpa1160,

          Complete name : D:\inception.m2ts
          Format : BDAV
          Your source m2ts file is BDAV format, we are trying to get the same format source and will check where the conversion problem is, please give us more days. Thanks.

          Sincerely,
          --
          Sunny

          Comment


            #6
            Similar problems. The basic program works great, but these new modules seem to be totally useless for anything but wasting time and discs. I have confidence that the DVDFAB techs will eventually work the bugs out, though.

            Comment


              #7
              Originally posted by jamesr88 View Post
              Similar problems. The basic program works great, but these new modules seem to be totally useless for anything but wasting time and discs. I have confidence that the DVDFAB techs will eventually work the bugs out, though.
              Hi jamesr88
              Have you tried the newest version of Fab found here New Version

              CBR929
              Even if it's a little thing, do something for those who have need of help, something for which you get no pay but the privilege of doing it.


              Setting Up ImgBurn and DVDFab to work together

              Tips for Posting DVDFab Logs in the Forum

              Comment


                #8
                tried the current release today - still the same problem:

                windows event log

                Code:
                Faulting application name: DVDFab.exe, version: 8.0.9.9, time stamp: 0x4df8e394
                Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
                Exception code: 0xc0000005
                Fault offset: 0x69df35c9
                Faulting process id: 0xbc4
                Faulting application start time: 0x01cc2c09605f8ea5
                Faulting application path: C:\Program Files (x86)\DVDFab 8 Qt\DVDFab.exe
                Faulting module path: unknown
                Report Id: a29efd78-9811-11e0-8a9d-002618b0c8f7
                dvdfab_internal.log

                Code:
                DVDFab 8.0.9.9 (2011/06/16  11:40:08)
                
                ------  begin mobile work(1/1)  ------
                
                
                 1m 07.11s: create config(3)
                 1m 07.11s: convert profile(generic.mkv.h264.audiocopy)
                 1m 07.12s: 513.05 : the video size is not the same 0x0 -> 1920x1080
                 1m 07.12s: 513.05: get video start offset(54003751)
                 1m 07.12s:  1m 08.85s: info: set output video frame_rate(24000/1001)
                 1m 08.85s: info: enable multi-thread software decoder
                 1m 09.87s: h264_encode: encode param profile(1) level(40) bitrate(7090)
                 1m 27.86s: ------ cancel all mobile work -------
                 1m 43.55s: 513.05 : the video size is not the same 0x0 -> 1920x1080
                 1m 43.55s: 513.05: get video start offset(54007509)
                 2m 10.97s:

                Comment


                  #9
                  hi,

                  I have check this log, this is not the problem about 2pass, when you select source and DVDFab select profile for you, please click "Edit" button, to make sure the output size is correct. and we will check this problem too.

                  thanks.

                  Comment


                    #10
                    Code:
                    Faulting application name: DVDFab.exe, version: 8.1.1.2, time stamp: 0x4e40b037
                    Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
                    Exception code: 0xc0000005
                    Fault offset: 0x69df35c9
                    Faulting process id: 0x15a4
                    Faulting application start time: 0x01cc617adc3b47d6
                    Faulting application path: C:\Program Files (x86)\DVDFab 8 Qt\DVDFab.exe
                    Faulting module path: unknown
                    Report Id: efab4e11-cd86-11e0-b558-002618b0c8f7
                    Still crashes even with the newest version.

                    If I use one pass the video is rendered with a horrible audio lag - but DVDFab doesn't crash.

                    If I use two pass the first pass is done, the second pass starts and DVDFab writes about 100-150 MB to disk before it crashes.

                    The message regarding the output size is nonsense (see attachment). If the input video is 1920x1080/23.976 fps and DVDFab exactly uses that settings for rendering I don't have to check the output size.

                    It HAS to do something with the second pass - otherwise the first pass would also crash.

                    Is there a solution possible the next time? I reported the error in March and I cannot count the new releases of DVDFab crashing since that date...
                    Attached Files

                    Comment

                    Working...
                    X