Blu-ray file from HDD to Ipad 2 video file

[the_fan]

Ok moderators here's the next issue, I've ripped the blu-ray file to my HDD as main movie and then I select that file to be converted to an iPad.h264.1080p file. I've already disabled the gpu/cuda crap, so that's not the issue. I started converting the file just before bed and I woke up to see that the status bar at the bottom had not moved passed 1 bar in over 7 hours. The time left slot read all zeros with the time elapsed slot still ticking. I tried to do it again and about 7 mins or so, the time left slot timed out again to all zeros, so i just canceled it. The log says something about the video file not being the same size and an unknown audio file? Are there specific settings that the ipad 2 conversion should be set to? I asssumed the settings would be defaulted to what is supported, but I guess not. I'm using the most current version of dvd fab and here's the log file, don't know what else to do, again this is very frustrating.................

DVDFab 8.1.3.8 (2011/12/28 11:31:56)

0m 01.65s: Qt Translator file load success
0m 01.87s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
18m 02.44s: 513.05 : the video size is not the same 0x0 -> 1920x1080
18m 31.92s:


------ begin mobile work(1/1) ------


18m 31.94s: info: create config(3)
18m 31.94s: info: convert profile(iPad.h264.1080p)
18m 31.94s: info: file (m2ts),3D(0)
18m 31.94s: info: streams((0.2)(1.2))
18m 31.97s: 513.05 : the video size is not the same 0x0 -> 1920x1080
18m 31.97s: info: not set correct fourcc for video(28)
18m 31.97s: info: set output video frame_rate(24000/1001)
18m 31.97s: info: enable multi-thread software decoder
18m 33.02s: info: h264_encode: encode param profile(1) level(41) bitrate(2122)
18m 35.04s: warning: receive unknown audio codec(65537), try to support it
25m 25.36s: ------ cancel all mobile work -------

[the_fan]

log from the 7 hour stretch last night.

And here's the log from last night that stretched over 7 hours which did practically nothing.

DVDFab 8.1.3.8 (2011/12/28 01:09:49)

0m 03.33s: Qt Translator file load success


DVDFab 8.1.3.8 (2011/12/28 01:14:19)

0m 01.63s: Qt Translator file load success
0m 01.98s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
3m 59.11s: detected blu-ray
3m 59.11s: drive F
3m 59.13s: blu-ray type 1
3m 59.13s: volume label 19316940_DRACULA
4m 00.64s: aacs 1 bd+ 0
4m 04.67s: got discinfo
4m 05.01s: got bdmv
4m 05.01s: Vendor: hp
4m 05.01s: Product: BDDVDRW CT21L
4m 05.01s: Revision: 1.02
4m 05.01s: Vendor specific: 09/07/27 7U01
4m 05.01s: AACS version: 1
4m 05.03s: Number of concurrent AGIDs: 4
4m 05.03s: Supports bus encryption: NO
4m 05.03s: Supports binding nonce generation: YES
4m 05.03s: Supports Hybrid discs: NO
4m 05.03s: got agid 0
4m 05.10s: sent host cert chal
4m 05.12s: got drive cert chal
4m 05.12s: BEC 0
4m 05.12s: DRIVE_VENDOR 0x0116
4m 05.20s: got drive key
4m 06.24s: got host key signature
4m 06.24s: verified drive signature
4m 06.24s: verified host signature
4m 06.37s: sent host signature and key point
4m 06.37s: got bus key
4m 06.38s: got agid 1
4m 06.46s: sent host cert chal
4m 06.46s: got drive cert chal
4m 06.48s: BEC 0
4m 06.48s: DRIVE_VENDOR 0x0116
4m 06.56s: got drive key
4m 06.56s: got host key signature
4m 06.56s: verified drive signature
4m 06.57s: verified host signature
4m 06.68s: sent host signature and key point
4m 06.68s: got bus key
4m 06.70s: got volume id
4m 06.70s: got volume id mac
4m 06.70s: volume id is correct
4m 06.70s: got vid
4m 06.82s: blu-ray ACE55D41F6B29DA79874CDB2CFC7F26632CBABFD
4m 07.44s: cert BEE=0x00 same
4m 07.63s: D B82D8EC7
4m 07.65s: got vuk
4m 07.96s: got unit key 1
4m 44.56s: got extended bdinfo
4m 44.56s: opened blu-ray
13m 17.11s: Blu-ray Copy: Main Movie
13m 17.13s: Source: F:\BDMV\
13m 17.13s: Playlist: 11
13m 17.13s: Chapters: 1 -> 16
13m 17.13s: TotalSize: 31275 MB
13m 17.13s: SourceSize: 31275 MB
13m 17.13s: RemoveHDAudio: 0
13m 17.15s: CompressToAC3: 0
13m 17.15s: OutputDisc: BDMV
13m 17.15s: OutputTarget: BD50
13m 17.15s: OutputVideo: 1080p/i
13m 17.15s: info: enable bd copy(mode=0)
13m 17.15s: info: streams()
13m 17.15s: info: blu-ray copy begin (unit[elem[atomic[00011.m2ts]]])
13m 17.16s: info: processing source(00011.m2ts)
79m 08.03s: 513.05 : the video size is not the same 0x0 -> 1920x1080
89m 29.88s:


------ begin mobile work(1/1) ------


89m 29.88s: info: create config(3)
89m 29.89s: info: convert profile(iPad.h264.1080p)
89m 29.89s: info: file (m2ts),3D(0)
89m 29.89s: info: streams((0.2)(1.2))
89m 29.91s: 513.05 : the video size is not the same 0x0 -> 1920x1080
89m 29.92s: info: not set correct fourcc for video(28)
89m 29.92s: info: set output video frame_rate(24000/1001)
89m 29.97s: info: enable multi-thread software decoder
89m 29.97s: CUDA GPU acceleration for video encoding enabled
89m 29.99s: info: h264_encode: encode param profile(1) level(41) bitrate(7458)
89m 30.45s: warning: receive unknown audio codec(65537), try to support it
526m 17.05s: ------ cancel all mobile work -------


DVDFab 8.1.3.8 (2011/12/28 10:02:15)

0m 01.84s: Qt Translator file load success
0m 02.15s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 36.69s: 513.05 : the video size is not the same 0x0 -> 1920x1080
0m 49.90s:


------ begin mobile work(1/1) ------


0m 49.90s: info: create config(3)
0m 49.90s: info: convert profile(iPad.h264.1080p)
0m 49.90s: info: file (m2ts),3D(0)
0m 49.90s: info: streams((0.2)(1.2))
0m 49.92s: 513.05 : the video size is not the same 0x0 -> 1920x1080
0m 49.93s: info: not set correct fourcc for video(28)
0m 49.93s: info: set output video frame_rate(959/40)
0m 49.93s: info: enable multi-thread software decoder
0m 50.96s: info: h264_encode: encode param profile(1) level(41) bitrate(7458)
0m 52.99s: warning: receive unknown audio codec(65537), try to support it
9m 28.88s: ------ cancel all mobile work -------
70m 01.48s: 513.05 : the video size is not the same 0x0 -> 1920x1080


DVDFab 8.1.3.8 (2011/12/28 11:17:38)

0m 01.71s: Qt Translator file load success
0m 01.99s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1

[the_fan]

And here's the error code when using blu ray ripper to convert

I now tried using blu ray ripper to convert the file to an ipad file and now i'm back to getting process failed errors, what the hell man. I have the gpu/cuda disabled and i'm trying to convert from my HDD, I've done everything I was told to do, I spent a lot of money on this software and am on the verge of asking for my money back, this is getting pretty rediculous.

Here's the log info for this epic fail.................

2m 09.13s:


------ begin mobile work(1/1) ------


2m 09.13s: info: create config(5)
2m 09.13s: info: convert profile(iPad.1080p.mp4)
2m 09.15s: info: bluray playlist(0),angle(0),chapter(1->16),3D(0)
2m 09.15s: info: streams((4113.2)(4352.2)(4608.1)(4609.1)(4610.1)(4 611.1)(4612.1))
2m 09.15s: info: not set correct fourcc for video(28)
2m 09.15s: info: set output video frame_rate(24000/1001)
2m 09.16s: info: subpicture preset(4), mode(1)
2m 09.16s: info: subpicture preset(4), mode(1)
2m 09.16s: info: subpicture preset(4), mode(1)
2m 09.16s: info: subpicture preset(4), mode(1)
2m 09.16s: info: subpicture preset(4), mode(1)
2m 09.16s: info: enable multi-thread software decoder
2m 10.19s: info: h264_encode: encode param profile(1) level(41) bitrate(7182)
2m 14.27s: info: processing source(00011.m2ts)
2m 17.28s: error: filter name(native_mux), type(128), id(11), get module_error(502.14 12)
2m 18.42s: ------ mobile work failed(504.00 0 error: filter name(native_mux), type(128), id(11), get module_error(502.14 12)

) ------


Conversion: one pass: 16:03:59
Source( 00011.m2ts )
: 16:04:04
Work 1 failed, Error = 504.00 0 error: filter name(native_mux), type(128), id(11), get module_error(502.14 12)

: 16:04:09

[the_fan]

Now I tried a different movie and I used video converter, I actually got about 42% of the way through completion this time, but then guess what........epic fail again, haha. Once again, here is the error log......

2m 09.13s:


------ begin mobile work(1/1) ------


2m 09.13s: info: create config(5)
2m 09.13s: info: convert profile(iPad.1080p.mp4)
2m 09.15s: info: bluray playlist(0),angle(0),chapter(1->16),3D(0)
2m 09.15s: info: streams((4113.2)(4352.2)(4608.1)(4609.1)(4610.1)(4 611.1)(4612.1))
2m 09.15s: info: not set correct fourcc for video(28)
2m 09.15s: info: set output video frame_rate(24000/1001)
2m 09.16s: info: subpicture preset(4), mode(1)
2m 09.16s: info: subpicture preset(4), mode(1)
2m 09.16s: info: subpicture preset(4), mode(1)
2m 09.16s: info: subpicture preset(4), mode(1)
2m 09.16s: info: subpicture preset(4), mode(1)
2m 09.16s: info: enable multi-thread software decoder
2m 10.19s: info: h264_encode: encode param profile(1) level(41) bitrate(7182)
2m 14.27s: info: processing source(00011.m2ts)
2m 17.28s: error: filter name(native_mux), type(128), id(11), get module_error(502.14 12)
2m 18.42s: ------ mobile work failed(504.00 0 error: filter name(native_mux), type(128), id(11), get module_error(502.14 12)

) ------


DVDFab 8.1.3.8 (2011/12/28 16:38:22)

0m 01.62s: Qt Translator file load success
0m 01.93s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 56.55s: detected blu-ray
0m 56.55s: drive F
0m 56.55s: blu-ray type 1
0m 56.55s: volume label INCEPTION
0m 56.78s: aacs 1 bd+ 0
2m 27.28s: got discinfo
2m 32.75s: got bdmv
2m 32.77s: Vendor: hp
2m 32.77s: Product: BDDVDRW CT21L
2m 32.77s: Revision: 1.02
2m 32.77s: Vendor specific: 09/07/27 7U01
2m 32.77s: AACS version: 1
2m 32.77s: Number of concurrent AGIDs: 4
2m 32.77s: Supports bus encryption: NO
2m 32.77s: Supports binding nonce generation: YES
2m 32.78s: Supports Hybrid discs: NO
2m 32.78s: got agid 0
2m 32.86s: sent host cert chal
2m 32.86s: got drive cert chal
2m 32.86s: BEC 0
2m 32.86s: DRIVE_VENDOR 0x0116
2m 32.94s: got drive key
2m 33.97s: got host key signature
2m 33.97s: verified drive signature
2m 33.97s: verified host signature
2m 34.08s: sent host signature and key point
2m 34.08s: got bus key
2m 34.09s: got agid 1
2m 34.17s: sent host cert chal
2m 34.17s: got drive cert chal
2m 34.19s: BEC 0
2m 34.19s: DRIVE_VENDOR 0x0116
2m 34.26s: got drive key
2m 34.26s: got host key signature
2m 34.26s: verified drive signature
2m 34.26s: verified host signature
2m 34.37s: sent host signature and key point
2m 34.37s: got bus key
2m 34.37s: got volume id
2m 34.37s: got volume id mac
2m 34.37s: volume id is correct
2m 34.39s: got vid
2m 34.50s: blu-ray C2DCDF44D670F9B6F3433566B8F62B2695960FB7
2m 35.20s: cert BEE=0x00 same
2m 35.37s: D E311F0F3
2m 35.39s: main playlist 00756.mpls
2m 35.39s: got vuk
2m 35.70s: got unit key 2
3m 00.55s: got extended bdinfo
3m 00.55s: opened blu-ray
25m 53.48s: Blu-ray Copy: Main Movie
25m 53.48s: Source: F:\BDMV\
25m 53.48s: Playlist: 100
25m 53.48s: Chapters: 1 -> 16
25m 53.48s: TotalSize: 33381 MB
25m 53.50s: SourceSize: 33381 MB
25m 53.50s: RemoveHDAudio: 0
25m 53.50s: CompressToAC3: 0
25m 53.50s: OutputDisc: BDMV
25m 53.50s: OutputTarget: BD50
25m 53.50s: OutputVideo: 1080p/i
25m 53.52s: info: enable bd copy(mode=0)
25m 53.52s: info: streams()
25m 53.52s: info: blu-ray copy begin (unit[elem[atomic[00001.m2ts],atomic[00004.m2ts],atomic[00009.m2ts],atomic[00010.m2ts],atomic[00011.m2ts],atomic[00013.m2ts],atomic[00015.m2ts],atomic[00016.m2ts],atomic[00017.m2ts],atomic[00018.m2ts],atomic[00019.m2ts],atomic[00020.m2ts],atomic[00021.m2ts],atomic[00022.m2ts],atomic[00023.m2ts],atomic[00024.m2ts],atomic[00025.m2ts],atomic[00026.m2ts],atomic[00027.m2ts],atomic[00028.m2ts],atomic[00029.m2ts],atomic[00030.m2ts],atomic[00031.m2ts],atomic[00032.m2ts],atomic[00033.m2ts],atomic[00034.m2ts],atomic[00035.m2ts],atomic[00036.m2ts],atomic[00037.m2ts]]])
25m 53.52s: info: processing source(00001.m2ts)
27m 02.45s: info: processing source(00004.m2ts)
27m 13.90s: info: processing source(00009.m2ts)


DVDFab 8.1.3.8 (2011/12/28 17:08:21)

0m 01.68s: Qt Translator file load success
0m 02.10s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 18.47s: detected blu-ray
0m 18.47s: drive F
0m 18.48s: blu-ray type 1
0m 18.48s: volume label INCEPTION
0m 19.34s: detected blu-ray
0m 19.34s: drive F
0m 19.34s: blu-ray type 1
0m 19.34s: volume label INCEPTION
0m 19.60s: aacs 1 bd+ 0
0m 30.13s: got discinfo
0m 35.91s: got bdmv
0m 35.91s: Vendor: hp
0m 35.91s: Product: BDDVDRW CT21L
0m 35.92s: Revision: 1.02
0m 35.92s: Vendor specific: 09/07/27 7U01
0m 35.92s: AACS version: 1
0m 35.92s: Number of concurrent AGIDs: 4
0m 35.92s: Supports bus encryption: NO
0m 35.92s: Supports binding nonce generation: YES
0m 35.92s: Supports Hybrid discs: NO
0m 35.92s: got agid 1
0m 36.00s: sent host cert chal
0m 36.02s: got drive cert chal
0m 36.02s: BEC 0
0m 36.02s: DRIVE_VENDOR 0x0116
0m 36.11s: got drive key
0m 36.98s: got host key signature
0m 36.98s: verified drive signature
0m 37.00s: verified host signature
0m 37.11s: sent host signature and key point
0m 37.11s: got bus key
0m 37.12s: got agid 2
0m 37.20s: sent host cert chal
0m 37.20s: got drive cert chal
0m 37.20s: BEC 0
0m 37.22s: DRIVE_VENDOR 0x0116
0m 37.28s: got drive key
0m 37.30s: got host key signature
0m 37.30s: verified drive signature
0m 37.30s: verified host signature
0m 37.40s: sent host signature and key point
0m 37.40s: got bus key
0m 37.40s: got volume id
0m 37.40s: got volume id mac
0m 37.42s: volume id is correct
0m 37.42s: got vid
0m 37.53s: blu-ray C2DCDF44D670F9B6F3433566B8F62B2695960FB7
0m 38.26s: cert BEE=0x00 same
0m 38.42s: D E311F0F3
0m 38.43s: main playlist 00756.mpls
0m 38.43s: got vuk
0m 38.78s: got unit key 2
1m 03.44s: got extended bdinfo
1m 03.44s: opened blu-ray
14m 42.13s: Blu-ray Copy: Main Movie
14m 42.15s: Source: F:\BDMV\
14m 42.15s: Playlist: 100
14m 42.15s: Chapters: 1 -> 16
14m 42.15s: TotalSize: 33381 MB
14m 42.15s: SourceSize: 33381 MB
14m 42.15s: RemoveHDAudio: 0
14m 42.17s: CompressToAC3: 0
14m 42.17s: OutputDisc: BDMV
14m 42.17s: OutputTarget: BD50
14m 42.17s: OutputVideo: 1080p/i
52m 46.21s: got bdmv
52m 48.00s: got extended bdinfo
53m 26.47s:


------ begin mobile work(1/1) ------


53m 26.47s: info: create config(5)
53m 26.49s: info: convert profile(iPad.1080p.mp4)
53m 26.49s: info: bluray playlist(0),angle(0),chapter(1->16),3D(0)
53m 26.49s: info: streams((4113.2)(4352.2)(4608.1)(4609.1)(4610.1)(4 611.1)(4612.1)(4613.1))
53m 26.49s: info: not set correct fourcc for video(28)
53m 26.50s: info: set output video frame_rate(24000/1001)
53m 26.50s: info: subpicture preset(4), mode(1)
53m 26.50s: info: subpicture preset(4), mode(1)
53m 26.50s: info: subpicture preset(4), mode(1)
53m 26.50s: info: subpicture preset(4), mode(1)
53m 26.50s: info: subpicture preset(4), mode(1)
53m 26.50s: info: subpicture preset(4), mode(1)
53m 26.50s: info: enable multi-thread software decoder
53m 27.66s: info: h264_encode: encode param profile(1) level(41) bitrate(5524)
53m 31.76s: info: processing source(00001.m2ts)
53m 34.79s: error: filter name(native_mux), type(128), id(11), get module_error(502.14 12)
53m 38.83s: ------ mobile work failed(504.00 0 error: filter name(native_mux), type(128), id(11), get module_error(502.14 12)

) ------
56m 26.14s:


------ begin mobile work(1/1) ------


56m 26.14s: info: create config(3)
56m 26.14s: info: convert profile(iPad.h264.1080p)
56m 26.14s: info: file (m2ts),3D(0)
56m 26.14s: info: streams((0.2)(1.2))
56m 26.26s: info: not set correct fourcc for video(28)
56m 26.26s: info: set output video frame_rate(959/40)
56m 26.28s: info: enable multi-thread software decoder
56m 27.34s: info: h264_encode: encode param profile(1) level(41) bitrate(7458)