Audio not synchronized 8.1.6.8 qt.

[SleVin]

HI all.. I converted a video from mkv to divx but with poor results, audio is not synchronized with the video version of dvdfab 8.1.6.8 qt. excuse my English.



DVDFab 8.1.6.8 (2012/03/21 03:05:39)

0m 02.02s: GPUAccelerate: 12351
0m 02.02s: CUDA cap: 1
0m 02.02s: Support coreavc decode: 0
0m 02.02s: Graphics info: NVIDIA GeForce GT 520M : 4.20 : 2.1
0m 02.02s: Qt Translator file load success


DVDFab 8.1.6.8 (2012/03/21 03:07:20)

0m 00.97s: GPUAccelerate: 12351
0m 00.97s: CUDA cap: 1
0m 01.03s: Support coreavc decode: 0
0m 01.03s: Graphics info: NVIDIA GeForce GT 520M : 4.20 : 2.1
0m 01.03s: Qt Translator file load success
0m 01.10s: Load config successful.
0m 01.99s: Init profile data driver sucessful.
0m 05.15s: Init GPU settings sucessful.
0m 05.15s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 05.16s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 05.51s: Config ExBar successful.
0m 05.52s: dvd2dvd have 8 elements.
0m 05.70s: dvd2mobile have 29 elements.
0m 06.78s: blu-ray2blu-ray have 4 elements.
0m 06.82s: blu-ray2mobile have 18 elements.
0m 07.48s: blu-ray23d have 7 elements.
0m 07.70s: blu-ray2dvd have 1 elements.
0m 07.73s: file2mobile have 28 elements.
0m 08.77s: file2dvd have 1 elements.
0m 08.80s: file2bluray have 1 elements.
0m 09.27s: Config work ui controls successful.
0m 12.39s: Init burn engine successful.
0m 12.43s: StartNotify successful.


DVDFab 8.1.6.8 (2012/03/21 03:10:39)

0m 00.96s: GPUAccelerate: 12351
0m 00.96s: CUDA cap: 1
0m 00.96s: Support coreavc decode: 0
0m 00.96s: Graphics info: NVIDIA GeForce GT 520M : 4.20 : 2.1
0m 00.96s: Qt Translator file load success
0m 01.02s: Load config successful.
0m 01.15s: Init profile data driver sucessful.
0m 04.30s: Init GPU settings sucessful.
0m 04.30s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 04.30s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 04.65s: Config ExBar successful.
0m 04.65s: dvd2dvd have 8 elements.
0m 04.83s: dvd2mobile have 29 elements.
0m 05.89s: blu-ray2blu-ray have 4 elements.
0m 05.93s: blu-ray2mobile have 18 elements.
0m 06.58s: blu-ray23d have 7 elements.
0m 06.80s: blu-ray2dvd have 1 elements.
0m 06.83s: file2mobile have 28 elements.
0m 07.87s: file2dvd have 1 elements.
0m 07.90s: file2bluray have 1 elements.
0m 08.37s: Config work ui controls successful.
0m 10.54s: Init burn engine successful.
0m 10.70s: StartNotify successful.
0m 20.55s:


------ begin mobile work(1/1) ------


0m 20.56s: info: create config(3)
0m 20.56s: info: convert profile(generic.avi.divx.audiocopy)
0m 20.56s: info: file (m2ts),3D(0)
0m 20.56s: info: streams((0.2)(1.1))
0m 20.68s: info: set output video frame_rate(30000/1001)
0m 20.68s: try to use gpu acceleration(1) for video decoding
0m 20.68s: CUDA GPU acceleration for video decoding enabled
0m 44.46s: ------ cancel all mobile work -------
0m 58.13s:


------ begin mobile work(1/1) ------


0m 58.13s: info: create config(3)
0m 58.13s: info: convert profile(generic.avi.divx.audiocopy)
0m 58.13s: info: file (m2ts),3D(0)
0m 58.13s: info: streams((0.2)(1.1))
0m 58.22s: info: set output video frame_rate(30000/1001)
0m 58.22s: try to use gpu acceleration(1) for video decoding
0m 58.23s: CUDA GPU acceleration for video decoding enabled
0m 27.04s: ------ cancel all mobile work -------


DVDFab 8.1.6.8 (2012/03/21 10:13:49)

0m 02.18s: GPUAccelerate: 12351
0m 02.18s: CUDA cap: 1
0m 02.18s: Support coreavc decode: 0
0m 02.18s: Graphics info: NVIDIA GeForce GT 520M : 4.20 : 2.1
0m 02.20s: Qt Translator file load success
0m 02.26s: Load config successful.
0m 02.45s: Init profile data driver sucessful.
0m 06.75s: Init GPU settings sucessful.
0m 06.75s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 06.75s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 07.17s: Config ExBar successful.
0m 07.17s: dvd2dvd have 8 elements.
0m 07.34s: dvd2mobile have 29 elements.
0m 08.39s: blu-ray2blu-ray have 4 elements.
0m 08.42s: blu-ray2mobile have 18 elements.
0m 09.04s: blu-ray23d have 7 elements.
0m 09.26s: blu-ray2dvd have 1 elements.
0m 09.29s: file2mobile have 28 elements.
0m 10.29s: file2dvd have 1 elements.
0m 10.32s: file2bluray have 1 elements.
0m 10.76s: Config work ui controls successful.
0m 25.02s: Init burn engine successful.
0m 25.16s: StartNotify successful.
0m 20.28s:


------ begin mobile work(1/1) ------


0m 20.28s: info: create config(3)
0m 20.28s: info: convert profile(generic.avi.divx.audiocopy)
0m 20.28s: info: file (m2ts),3D(0)
0m 20.28s: info: streams((0.2)(1.1))
0m 20.39s: info: set output video frame_rate(30000/1001)
0m 20.39s: try to use gpu acceleration(1) for video decoding
0m 20.39s: CUDA GPU acceleration for video decoding enabled
0m 22.41s: ------ cancel all mobile work -------


DVDFab 8.1.6.8 (2012/03/21 10:27:36)

0m 01.57s: GPUAccelerate: 12351
0m 01.57s: CUDA cap: 1
0m 01.57s: Support coreavc decode: 0
0m 01.57s: Graphics info: NVIDIA GeForce GT 520M : 4.20 : 2.1
0m 01.57s: Qt Translator file load success
0m 01.62s: Load config successful.
0m 01.84s: Init profile data driver sucessful.
0m 05.77s: Init GPU settings sucessful.
0m 05.77s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 05.77s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 06.25s: Config ExBar successful.
0m 06.25s: dvd2dvd have 8 elements.
0m 06.45s: dvd2mobile have 29 elements.
0m 07.48s: blu-ray2blu-ray have 4 elements.
0m 07.51s: blu-ray2mobile have 18 elements.
0m 08.14s: blu-ray23d have 7 elements.
0m 08.34s: blu-ray2dvd have 1 elements.
0m 08.39s: file2mobile have 28 elements.
0m 09.39s: file2dvd have 1 elements.
0m 09.42s: file2bluray have 1 elements.
0m 09.85s: Config work ui controls successful.
0m 11.10s: Init burn engine successful.
0m 11.23s: StartNotify successful.
0m 56.41s:


------ begin mobile work(1/1) ------


0m 56.41s: info: create config(3)
0m 56.41s: info: convert profile(generic.avi.xvid.audiocopy)
0m 56.41s: info: file (m2ts),3D(0)
0m 56.41s: info: streams((0.2)(2.1))
0m 56.50s: info: set output video frame_rate(30000/1001)
0m 56.50s: try to use gpu acceleration(1) for video decoding
0m 56.50s: CUDA GPU acceleration for video decoding enabled
0m 14.48s: ------ cancel all mobile work -------

[CBR929]

Hi SleVin
My suggestion is to use the software settings.
Open Fab click the Click the Green √ at top right corner of the DVD Fab screen, and open Common Settings > General >A/V Codec, put a check in Disable all GPU codes and make sure they are set to Software, restart Fab and try again.
CBR929

[SleVin]

Hi SleVin
My suggestion is to use the software settings.
Open Fab click the Click the Green √ at top right corner of the DVD Fab screen, and open Common Settings > General >A/V Codec, put a check in Disable all GPU codes and make sure they are set to Software, restart Fab and try again.
CBR929

cuda without taking too long! I tried the program other than dvd fab and it works well why? I chose to cuda without cuda dvd fab does not make sense.

[SleVin]

I set all the options of the software but is still not synchronized! : Confuso:

DVDFab 8.1.6.8 (2012/03/22 11:35:50)

0m 00.94s: GPUAccelerate: 12351
0m 00.94s: CUDA cap: 1
0m 00.94s: Support coreavc decode: 0
0m 00.94s: Graphics info: NVIDIA GeForce GT 520M : 4.20 : 2.1
0m 00.95s: Qt Translator file load success
0m 01.01s: Load config successful.
0m 01.24s: Init profile data driver sucessful.
0m 04.46s: Init GPU settings sucessful.
0m 04.46s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 04.47s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 04.80s: Config ExBar successful.
0m 04.80s: dvd2dvd have 8 elements.
0m 04.99s: dvd2mobile have 29 elements.
0m 06.03s: blu-ray2blu-ray have 4 elements.
0m 06.07s: blu-ray2mobile have 18 elements.
0m 06.72s: blu-ray23d have 7 elements.
0m 06.93s: blu-ray2dvd have 1 elements.
0m 06.97s: file2mobile have 28 elements.
0m 07.99s: file2dvd have 1 elements.
0m 08.03s: file2bluray have 1 elements.
0m 08.48s: Config work ui controls successful.
0m 08.58s: Init burn engine successful.
0m 08.72s: StartNotify successful.
0m 12.75s:


------ begin mobile work(1/1) ------


0m 12.75s: info: create config(3)
0m 12.76s: info: convert profile(generic.avi.divx.mp3)
0m 12.76s: info: file (m2ts),3D(0)
0m 12.76s: info: streams((0.2)(1.2))
0m 14.27s: info: set output video frame_rate(30000/1001)
0m 14.27s: info: enable multi-thread software decoder
0m 40.97s: ------ cancel all mobile work -------

[rosswaters]

Same issues on Blu-Ray to any format

I bought the DVDFab All-In-One Lifetime Gift two weeks ago and had 8156Qt installed at the time, everything was fine. I then decided to update the software a few days ago to 8168Qt and now no movies I've tried will convert without major sync issues. I tried software, cuda, from Disc, from HD and even tried to do a MT2S. The MT2S convert just fails mid flight 15 minutes in to the movies. Something is not right and I will be going back 8156Qt.

All formats AVI, MP4, WMV and MKV have all failed on this converting process where the 8156Qt worked fine.