Apollo18 Rip to .m2ts error on PS3 (8168Qt)

[squitzad]

I have a similar problem!
When converting Rise Planets Of The Apes (reg. B Sweden) .m2ts to iPad or iPod the conversion stops when arround 80% of the conversion is finnished no error mesage. Fps drops to 0, % stops, time to finnish increases etc.

Tried some different settings turning on or off all GPU acceleration/lightning just using software. Same result!

Uninstalling and reinstalling the software. Same result!
--------------------------------------------------------------------------

DVDFab 8.1.6.8 (2012/03/27 22:40:10)

0m 01.59s: GPUAccelerate: 28735
0m 01.60s: CUDA cap: 1
0m 01.60s: Support coreavc decode: 1
0m 01.60s: Graphics info: NVIDIA GeForce GTX 470 : 4.10 : 2.0
0m 01.60s: Qt Translator file load success
0m 01.65s: Load config successful.
0m 01.74s: Init profile data driver sucessful.
0m 04.78s: Init GPU settings sucessful.
0m 04.78s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 04.78s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 05.10s: Config ExBar successful.
0m 05.10s: dvd2dvd have 8 elements.
0m 05.31s: dvd2mobile have 29 elements.
0m 06.42s: blu-ray2blu-ray have 4 elements.
0m 06.47s: blu-ray2mobile have 18 elements.
0m 07.16s: blu-ray23d have 7 elements.
0m 07.37s: blu-ray2dvd have 1 elements.
0m 07.42s: file2mobile have 28 elements.
0m 08.50s: file2dvd have 1 elements.
0m 08.54s: file2bluray have 1 elements.
0m 09.00s: Config work ui controls successful.
0m 09.07s: Init burn engine successful.
0m 09.15s: StartNotify successful.
0m 44.96s:


------ begin mobile work(1/1) ------


0m 44.96s: info: create config(3)
0m 44.97s: info: convert profile(iPad.h264)
0m 44.97s: info: file (m2ts),3D(0)
0m 44.97s: info: streams((0.2)(1.2))
0m 45.05s: info: not set correct fourcc for video(28)
0m 45.07s: info: set output video frame_rate(24000/1001)
0m 45.07s: try to use gpu acceleration(1) for video decoding
0m 45.07s: CUDA GPU acceleration for video decoding enabled
0m 46.10s: warning: h264 encode macroblocks per second(41814) exceed the standard(40500), video size(1024x436, 23.976), specify profile(0)-level(30)
0m 46.10s: info: h264_encode: encode param profile(1) level(31) bitrate(1606)
0m 23.12s: ------ cancel all mobile work -------
0m 33.16s:


------ begin mobile work(1/1) ------


0m 33.16s: info: create config(3)
0m 33.16s: info: convert profile(iPad.h264)
0m 33.16s: info: file (m2ts),3D(0)
0m 33.16s: info: streams((0.2)(1.2))
0m 33.25s: info: not set correct fourcc for video(28)
0m 33.25s: info: set output video frame_rate(24000/1001)
0m 33.25s: info: enable multi-thread software decoder
0m 34.28s: warning: h264 encode macroblocks per second(41814) exceed the standard(40500), video size(1024x436, 23.976), specify profile(0)-level(30)
0m 34.28s: info: h264_encode: encode param profile(1) level(31) bitrate(1606)
------------------------------------------------------------------------

DVDFab 8.1.6.8 (2012/03/28 06:17:12)

0m 01.67s: GPUAccelerate: 28735
0m 01.67s: CUDA cap: 1
0m 01.67s: Support coreavc decode: 1
0m 01.67s: Graphics info: NVIDIA GeForce GTX 470 : 4.10 : 2.0
0m 01.67s: Qt Translator file load success
0m 01.74s: Load config successful.
0m 01.84s: Init profile data driver sucessful.
0m 04.83s: Init GPU settings sucessful.
0m 04.83s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 04.85s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 05.21s: Config ExBar successful.
0m 05.21s: dvd2dvd have 8 elements.
0m 05.41s: dvd2mobile have 29 elements.
0m 06.52s: blu-ray2blu-ray have 4 elements.
0m 06.56s: blu-ray2mobile have 18 elements.
0m 07.23s: blu-ray23d have 7 elements.
0m 07.47s: blu-ray2dvd have 1 elements.
0m 07.50s: file2mobile have 28 elements.
0m 08.58s: file2dvd have 1 elements.
0m 08.62s: file2bluray have 1 elements.
0m 09.08s: Config work ui controls successful.
0m 09.22s: Init burn engine successful.
0m 09.29s: StartNotify successful.
0m 24.60s:


------ begin mobile work(1/1) ------


0m 24.60s: info: create config(3)
0m 24.60s: info: convert profile(iPad.h264)
0m 24.60s: info: file (m2ts),3D(0)
0m 24.60s: info: streams((0.2)(1.2))
0m 24.69s: info: not set correct fourcc for video(28)
0m 24.69s: info: set output video frame_rate(24000/1001)
0m 24.70s: info: enable multi-thread software decoder
0m 25.72s: warning: h264 encode macroblocks per second(41814) exceed the standard(40500), video size(1024x436, 23.976), specify profile(0)-level(30)
0m 25.72s: info: h264_encode: encode param profile(1) level(31) bitrate(1606)

[squitzad]

Tried 8058 now it works but the sync is way off!

[squitzad]

8173Qt Same as before, hangs before finnishin!

[90312]

1024x436 is pretty weird, try 1024x576 once just to see?

[squitzad]

Tried that same thing!

[90312]

If you still have the macroblocks per second error in the log you're going to have to go with a smaller frame resolution I think.

Or maybe a lower bit rate?

[squitzad]

No, doesn't work!

DVDFab 8.1.7.3 (2012/04/01 19:27:54)

0m 01.59s: GPUAccelerate: 28735
0m 01.59s: CUDA cap: 1
0m 01.60s: Support coreavc decode: 1
0m 01.60s: Graphics info: NVIDIA GeForce GTX 470 : 4.10 : 2.0
0m 01.60s: Qt Translator file load success
0m 01.65s: Load config successful.
0m 01.77s: Init profile data driver sucessful.
0m 04.83s: Init GPU settings sucessful.
0m 04.83s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 04.86s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 05.17s: Config ExBar successful.
0m 05.17s: dvd2dvd have 8 elements.
0m 05.38s: dvd2mobile have 29 elements.
0m 06.50s: blu-ray2blu-ray have 4 elements.
0m 06.55s: blu-ray2mobile have 18 elements.
0m 07.23s: blu-ray23d have 7 elements.
0m 07.45s: blu-ray2dvd have 1 elements.
0m 07.50s: file2mobile have 28 elements.
0m 08.58s: file2dvd have 1 elements.
0m 08.61s: file2bluray have 1 elements.
0m 09.07s: Config work ui controls successful.
0m 09.18s: Init burn engine successful.
0m 09.31s: StartNotify successful.
0m 09.31s: got media type 15
0m 15.01s: drive L
0m 15.01s: type Blu-ray BDMV
0m 15.01s: volume label APOLLO 18
0m 16.21s: aacs 1 bd+ 0
0m 16.95s: got discinfo
0m 17.60s: got bdmv
0m 17.60s: Vendor: TSSTcorp
0m 17.60s: Product: DVDWBD SH-B123L
0m 17.62s: Revision: SB04
0m 17.62s: Vendor specific: 0331
0m 17.62s: AACS version: 1
0m 17.62s: Number of concurrent AGIDs: 2
0m 17.62s: Supports bus encryption: YES
0m 17.62s: Supports binding nonce generation: NO
0m 17.62s: Supports Hybrid discs: NO
0m 17.62s: got agid 0
0m 17.68s: sent host cert chal
0m 17.68s: got drive cert chal
0m 17.68s: BEC 1
0m 17.68s: DRIVE_VENDOR 0x0182
0m 17.76s: got drive key
0m 18.29s: got host key signature
0m 18.29s: verified drive signature
0m 18.29s: verified host signature
0m 18.37s: sent host signature and key point
0m 18.37s: got bus key
0m 18.37s: got agid 0
0m 18.43s: sent host cert chal
0m 18.44s: got drive cert chal
0m 18.44s: BEC 1
0m 18.44s: DRIVE_VENDOR 0x0182
0m 18.52s: got drive key
0m 18.52s: got host key signature
0m 18.52s: verified drive signature
0m 18.52s: verified host signature
0m 18.60s: sent host signature and key point
0m 18.60s: got bus key
0m 20.99s: got volume id
0m 21.00s: got volume id mac
0m 21.00s: volume id is correct
0m 21.00s: got vid
0m 21.13s: blu-ray B04EA3285653786D18B07114DD1D78C98775B713
0m 21.28s: cert BEE=0x00
0m 22.25s: D A3EC864A
0m 22.25s: got vuk
0m 22.27s: got agid 0
0m 22.33s: sent host cert chal
0m 22.33s: got drive cert chal
0m 22.33s: BEC 1
0m 22.33s: DRIVE_VENDOR 0x0182
0m 22.41s: got drive key
0m 22.41s: got host key signature
0m 22.41s: verified drive signature
0m 22.42s: verified host signature
0m 22.48s: sent host signature and key point
0m 22.50s: got bus key
0m 22.50s: got data key
0m 22.53s: got unit key 1
0m 29.66s: got extended bdinfo
0m 29.68s: opened blu-ray
0m 03.60s:


------ begin mobile work(1/1) ------


0m 03.60s: info: create config(3)
0m 03.60s: info: convert profile(ipad.default)
0m 03.60s: info: file (m2ts),3D(0)
0m 03.63s: info: streams((0.2)(1.2))
0m 03.71s: info: not set correct fourcc for video(28)
0m 03.72s: info: set output video frame_rate(24000/1001)
0m 03.72s: try to use gpu acceleration(1) for video decoding
0m 03.72s: CUDA GPU acceleration for video decoding enabled
0m 03.72s: CUDA GPU acceleration for video encoding enabled
0m 03.72s: info: h264_encode: encode param profile(1) level(31) bitrate(1738)
0m 50.55s: ------ cancel all mobile work -------
0m 39.91s:


------ begin mobile work(1/1) ------


0m 39.91s: info: create config(3)
0m 39.91s: info: convert profile(ipad.default)
0m 39.91s: info: file (m2ts),3D(0)
0m 39.93s: info: streams((0.2)(1.2))
0m 40.01s: info: not set correct fourcc for video(28)
0m 40.02s: info: set output video frame_rate(24000/1001)
0m 40.02s: try to use gpu acceleration(1) for video decoding
0m 40.02s: CUDA GPU acceleration for video decoding enabled
0m 40.02s: CUDA GPU acceleration for video encoding enabled
0m 40.04s: info: h264_encode: encode param profile(1) level(31) bitrate(2617)

[90312]

Well the macroblocks error is gone now. Only other thing I would offer is turn off the GPU acceleration stuff and try.

[squitzad]

Stopped @ 82.63%!


DVDFab 8.1.7.3 (2012/04/01 21:08:09)

0m 01.62s: GPUAccelerate: 28735
0m 01.62s: CUDA cap: 1
0m 01.62s: Support coreavc decode: 1
0m 01.62s: Graphics info: NVIDIA GeForce GTX 470 : 4.10 : 2.0
0m 01.62s: Qt Translator file load success
0m 01.68s: Load config successful.
0m 01.77s: Init profile data driver sucessful.
0m 04.91s: Init GPU settings sucessful.
0m 04.91s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 04.91s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 05.24s: Config ExBar successful.
0m 05.24s: dvd2dvd have 8 elements.
0m 05.44s: dvd2mobile have 29 elements.
0m 06.59s: blu-ray2blu-ray have 4 elements.
0m 06.64s: blu-ray2mobile have 18 elements.
0m 07.33s: blu-ray23d have 7 elements.
0m 07.56s: blu-ray2dvd have 1 elements.
0m 07.61s: file2mobile have 28 elements.
0m 08.75s: file2dvd have 1 elements.
0m 08.78s: file2bluray have 1 elements.
0m 09.26s: Config work ui controls successful.
0m 09.37s: Init burn engine successful.
0m 09.45s: StartNotify successful.
0m 09.46s: got media type 15
0m 15.08s: drive L
0m 15.08s: type Blu-ray BDMV
0m 15.08s: volume label APOLLO 18
0m 16.29s: aacs 1 bd+ 0
0m 17.02s: got discinfo
0m 17.66s: got bdmv
0m 17.67s: Vendor: TSSTcorp
0m 17.67s: Product: DVDWBD SH-B123L
0m 17.67s: Revision: SB04
0m 17.67s: Vendor specific: 0331
0m 17.67s: AACS version: 1
0m 17.67s: Number of concurrent AGIDs: 2
0m 17.67s: Supports bus encryption: YES
0m 17.67s: Supports binding nonce generation: NO
0m 17.67s: Supports Hybrid discs: NO
0m 17.67s: got agid 0
0m 17.74s: sent host cert chal
0m 17.75s: got drive cert chal
0m 17.75s: BEC 1
0m 17.75s: DRIVE_VENDOR 0x0182
0m 17.83s: got drive key
0m 18.34s: got host key signature
0m 18.34s: verified drive signature
0m 18.34s: verified host signature
0m 18.42s: sent host signature and key point
0m 18.42s: got bus key
0m 18.44s: got agid 0
0m 18.50s: sent host cert chal
0m 18.50s: got drive cert chal
0m 18.50s: BEC 1
0m 18.50s: DRIVE_VENDOR 0x0182
0m 18.58s: got drive key
0m 18.58s: got host key signature
0m 18.58s: verified drive signature
0m 18.58s: verified host signature
0m 18.66s: sent host signature and key point
0m 18.67s: got bus key
0m 21.01s: got volume id
0m 21.03s: got volume id mac
0m 21.03s: volume id is correct
0m 21.03s: got vid
0m 21.15s: blu-ray B04EA3285653786D18B07114DD1D78C98775B713
0m 21.29s: cert BEE=0x00
0m 22.10s: D A3EC864A
0m 22.12s: got vuk
0m 22.12s: got agid 0
0m 22.20s: sent host cert chal
0m 22.20s: got drive cert chal
0m 22.20s: BEC 1
0m 22.20s: DRIVE_VENDOR 0x0182
0m 22.28s: got drive key
0m 22.28s: got host key signature
0m 22.28s: verified drive signature
0m 22.28s: verified host signature
0m 22.35s: sent host signature and key point
0m 22.35s: got bus key
0m 22.37s: got data key
0m 22.42s: got unit key 1
0m 27.79s: user cancelled
0m 27.79s: failed to open disc 1
0m 53.29s:


------ begin mobile work(1/1) ------


0m 53.29s: info: create config(3)
0m 53.29s: info: convert profile(ipad.default)
0m 53.31s: info: file (m2ts),3D(0)
0m 53.31s: info: streams((0.2)(1.2))
0m 55.65s: info: not set correct fourcc for video(28)
0m 55.65s: info: set output video frame_rate(24000/1001)
0m 55.65s: try to use gpu acceleration(1) for video decoding
0m 55.65s: CUDA GPU acceleration for video decoding enabled
0m 55.66s: CUDA GPU acceleration for video encoding enabled
0m 55.66s: info: h264_encode: encode param profile(1) level(31) bitrate(1207)
0m 15.47s: ------ cancel all mobile work -------
0m 14.82s:


------ begin mobile work(1/1) ------


0m 14.82s: info: create config(3)
0m 14.82s: info: convert profile(ipad.default)
0m 14.82s: info: file (m2ts),3D(0)
0m 14.82s: info: streams((0.2)(1.2))
0m 14.91s: info: not set correct fourcc for video(28)
0m 14.93s: info: set output video frame_rate(24000/1001)
0m 14.93s: info: enable multi-thread software decoder
0m 15.94s: info: h264_encode: encode param profile(1) level(31) bitrate(1207)
0m 32.99s: ------ cancel all mobile work -------

[CBR929]

Hi squitzad
Do you have a disc in your drive while trying to convert your file, or are you trying to convert from your drive?

If the later you are using the wrong option "Video Converter" you need to use the "BD Ripper" and not Video Converter.

Please do not convert from your drive
First save it to your HDD as BD50 "Main Movie" using BD Copy without compression.
Then open the hard drive folder and use the folder on your HDD to do your converting.
Doing it this way saves wear and tear on your optical drive and is also faster.
CBR929

[squitzad]

I had a disc in the drive but converted from the HDD.

I'm trying to convert Rise Of The Planet The Apes.
It's ripped to a file size 6,16GB .m2ts ac3.
I've converted several rips this way but suddeny ran into problems.
In the last trial I tried to do a genering conversion to .MP4.mp3 but it stopped as well.

------ begin mobile work(1/1) ------


0m 49.87s: info: create config(3)
0m 49.87s: info: convert profile(generic.mp4.h264.mp3)
0m 49.87s: info: file (m2ts),3D(0)
0m 49.87s: info: streams((0.2)(1.2))
0m 50.01s: info: set output video frame_rate(24000/1001)
0m 50.02s: info: enable multi-thread software decoder
0m 51.04s: info: h264_encode: encode param profile(1) level(30) bitrate(1409)
0m 56.24s: audio_encode finish job

[cibomatto2002]

I had the same trouble try this

[squitzad]

Tried that and I could see that all GPU accelaeration was turned off. However it stopped again @ 78.79% and the sync was off in the partial file that came out. I'll try again withsome new settings.
----------------------------------------------------------------------

DVDFab 8.1.7.3 (2012/04/03 10:03:56)

0m 01.68s: GPUAccelerate: 28735
0m 01.68s: CUDA cap: 1
0m 01.68s: Support coreavc decode: 1
0m 01.68s: Graphics info: NVIDIA GeForce GTX 470 : 4.10 : 2.0
0m 01.68s: Qt Translator file load success
0m 01.76s: Load config successful.
0m 01.85s: Init profile data driver sucessful.
0m 04.97s: Init GPU settings sucessful.
0m 04.97s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 04.99s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 05.35s: Config ExBar successful.
0m 05.35s: dvd2dvd have 8 elements.
0m 05.56s: dvd2mobile have 29 elements.
0m 06.70s: blu-ray2blu-ray have 4 elements.
0m 06.75s: blu-ray2mobile have 18 elements.
0m 07.45s: blu-ray23d have 7 elements.
0m 07.67s: blu-ray2dvd have 1 elements.
0m 07.72s: file2mobile have 28 elements.
0m 08.82s: file2dvd have 1 elements.
0m 08.86s: file2bluray have 1 elements.
0m 09.34s: Config work ui controls successful.
0m 09.48s: Init burn engine successful.
0m 09.57s: StartNotify successful.
0m 57.18s:


------ begin mobile work(1/1) ------


0m 57.18s: info: create config(3)
0m 57.18s: info: convert profile(ipad.default)
0m 57.18s: info: file (m2ts),3D(0)
0m 57.18s: info: streams((0.2)(1.2))
0m 57.25s: info: not set correct fourcc for video(28)
0m 57.27s: info: set output video frame_rate(24000/1001)
0m 57.27s: info: enable multi-thread software decoder
0m 58.30s: info: h264_encode: encode param profile(1) level(31) bitrate(1991)
0m 32.54s: ------ cancel all mobile work -------

[squitzad]

Doesn't matter what I do it's not working. if i use 8058 the sync is off. If I use 8173 it stops.

[squitzad]

Tried to convert "127 Hours". Stopped @ 95.08%.


DVDFab 8.1.7.3 (2012/04/03 15:57:06)

0m 01.68s: GPUAccelerate: 28735
0m 01.70s: CUDA cap: 1
0m 01.70s: Support coreavc decode: 1
0m 01.70s: Graphics info: NVIDIA GeForce GTX 470 : 4.10 : 2.0
0m 01.70s: Qt Translator file load success
0m 01.74s: Load config successful.
0m 01.82s: Init profile data driver sucessful.
0m 04.91s: Init GPU settings sucessful.
0m 04.91s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 04.91s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 05.21s: Config ExBar successful.
0m 05.21s: dvd2dvd have 8 elements.
0m 05.46s: dvd2mobile have 29 elements.
0m 06.52s: blu-ray2blu-ray have 4 elements.
0m 06.56s: blu-ray2mobile have 18 elements.
0m 07.22s: blu-ray23d have 7 elements.
0m 07.44s: blu-ray2dvd have 1 elements.
0m 07.48s: file2mobile have 28 elements.
0m 08.51s: file2dvd have 1 elements.
0m 08.54s: file2bluray have 1 elements.
0m 09.00s: Config work ui controls successful.
0m 09.09s: Init burn engine successful.
0m 09.17s: StartNotify successful.
0m 15.84s:


------ begin mobile work(1/1) ------


0m 15.84s: info: create config(3)
0m 15.84s: info: convert profile(iPad.h264)
0m 15.84s: info: file (m2ts),3D(0)
0m 15.85s: info: streams((0.2)(1.2))
0m 15.95s: info: not set correct fourcc for video(28)
0m 15.95s: info: set output video frame_rate(24000/1001)
0m 15.96s: info: enable multi-thread software decoder
0m 16.98s: info: h264_encode: encode param profile(0) level(30) bitrate(1243)
0m 12.46s: ------ cancel all mobile work -------