2d to 3d blu ray, best way

[mrbasilbrush]

hi
please can someone give me the easiest way to covert a blu ray from 2d to 3d that you can burn onto a 25gb blu ray disc to play on a 3d tv as i can't seem to work it out.
step by step if poss,

cheers

[Ning]

hi
please can someone give me the easiest way to covert a blu ray from 2d to 3d that you can burn onto a 25gb blu ray disc to play on a 3d tv as i can't seem to work it out.
step by step if poss,

cheers

Compress your BD3D in 25GB in Image with DVDFab Burning engine.
Or
1. Compress your BD3D in 25GB in folder.
2. Mount it with Virtual Drive.
3. Create an image disc with ImgBurn.
4. Burn this Image Disc with ImgBurn.
- Verify if SSIF exist under BDMV folder.

Please give this thread a read through it may help

http://forum.dvdfab.com/showthread.php?t=21327

[glenns]

How to make a side by side 3d movie from a regular blu ray using Fab version 9

Use blu ray copy to make a iso copy from store brought disk to hard drive.Then open blu ray ripper
load iso movie in ripper
click profile box (lower left corner)
click 3d format (upper bars)
click m2ts (left side)
Were going to double click the (3d m2ts audio copy normal profile) last profile on right.
Now click on advanced settings
under video (top bar)
Under video quality make your choice, high quality for bigger more detailed file's, normal file for medium size file's and small for the same.You can also fool around with custom size and adjust the bit rate and file size yourself.



Now click on 3d (top bar) Turn gain up to 10 with slider bar look to the left side both split screen and left & right side by side should be checked the circle should be green.
click ok
click start and your good to go.Their are other ways and choices to make to do this but this should give you a good starting point.

If you look at the preview the movie should be playing frame by frame and you should see 2 pictures side by side playing in the preview box this is correct and will play in 3d when your done.The TV must then be put in 3d mode side by side to view this file or disk in 3d.

If you make the file smaller to fit a dvd 9- 8.5 gig disk or dvd 5 disk most newer regular non 3d dvd players will play these data file disks no need for a 3d blu ray player unless you make the file on a blu ray disks.File size is what tells you what size disk to record these on and what kind of player you will need.

You will always need a 3d TV to view these that can do side by side 3d most can.Viewing on a non 3d tv or a 3d tv until you put it in 3d side by side mode will result in two side by side pictures.The TV put's them together to make a 3d picture.

[mrbasilbrush]

many many thanks,
i selected high quality ..
was that a silly thing to do as it seems to be converting at the speed of a snail.
ps where do you change the file size

[mrbasilbrush]

many many thanks,
i selected high quality ..
was that a silly thing to do as it seems to be converting at the speed of a snail.
ps where do you change the file size

ahh, think i've got it.
file size is that controlled by the quality. re high quality large file?
speeding up now coming down to 4 hr's..perhaps it will speed up some more if i stop using the pc for other things.
thanks again for all your help.

[mrbasilbrush]

How to make a side by side 3d movie from a regular blu ray using Fab version 9

Use blu ray copy to make a iso copy from store brought disk to hard drive.Then open blu ray ripper
load iso movie in ripper
click profile box (lower left corner)
click 3d format (upper bars)
click m2ts (left side)
Were going to double click the (3d m2ts audio copy normal profile) last profile on right.
Now click on advanced settings
under video (top bar)
Under video quality make your choice, high quality for bigger more detailed file's, normal file for medium size file's and small for the same.You can also fool around with custom size and adjust the bit rate and file size yourself.



Now click on 3d (top bar) Turn gain up to 10 with slider bar look to the left side both split screen and left & right side by side should be checked the circle should be green.
click ok
click start and your good to go.Their are other ways and choices to make to do this but this should give you a good starting point.

If you look at the preview the movie should be playing frame by frame and you should see 2 pictures side by side playing in the preview box this is correct and will play in 3d when your done.The TV must then be put in 3d mode side by side to view this file or disk in 3d.

If you make the file smaller to fit a dvd 9- 8.5 gig disk or dvd 5 disk most newer regular non 3d dvd players will play these data file disks no need for a 3d blu ray player unless you make the file on a blu ray disks.File size is what tells you what size disk to record these on and what kind of player you will need.

You will always need a 3d TV to view these that can do side by side 3d most can.Viewing on a non 3d tv or a 3d tv until you put it in 3d side by side mode will result in two side by side pictures.The TV put's them together to make a 3d picture.

ahh seems to be stuck. it has changed to task time left 0.00 and has been stuck on source 00079.m2ts since 21.43 and its now 00.16 thats the time by the way 9.43 pm to 12.16 am and no sign of it moving. any idea's

[glenns]

Post your internal log in Fabs settings.Cut and past to a post.

[mrbasilbrush]

DVDFab 9.0.3.2 (2013/04/16 21:35:49)

0m 00.09s: Start preload dll...
0m 00.14s: Load dll successful.
0m 00.14s: Start load fabplay dll...
0m 00.18s: Load fabplay dll successful.
0m 00.18s: Windows os type is: 14.
0m 00.18s: Transfer settings successful.
0m 00.21s: GPUAccelerate: 5
0m 00.21s: CUDA cap: 0
0m 00.21s: Support coreavc decode: 0
0m 00.21s: Graphics info: Intel(R) HD Graphics : :
0m 00.21s: Qt Translator file load success
0m 00.25s: Start get sys number.
0m 00.25s: Serial number is: 50-46-5d-08-5d-89
0m 00.25s: Reg URL link is: https://www.dvdfabstore.com/auth/v2/
0m 00.25s: Version is: 9032
0m 00.25s: Product is: 2
0m 00.25s: Connect type is: 1
0m 00.96s: Times of connecting error is: 0
0m 00.96s: Parse string is: 1:20
0m 00.96s: Parse string is: 2:20
0m 00.96s: Parse string is: 20:18
0m 00.96s: Parse string is: 21:26
0m 00.96s: Parse string is: 70:26
0m 00.96s: Parse string is: OV:9028
0m 00.96s: Parse string is: BV:9033
0m 01.28s: option - 0 : 1 - 2 : 1 - 2 : 1 - 11 : 1 - 20 : 1 - 21 : 1 - 50 : 1 - 60 : 1 - 61 : 1 - 62 : 1 - 80 : 1 - 22 : 1 - 70 : 1 - 71 : 1 - 72 : 1
0m 01.28s: End check info.
0m 01.28s: Load config successful.
0m 01.34s: Init profile data driver sucessful.
0m 01.34s: Init GPU settings sucessful.
0m 04.84s: Begin init preview play engine.
0m 04.84s: Init DirectShow engine successful.
0m 04.98s: Init burn engine successful.
0m 06.66s: opening drive D
0m 06.67s: opened i/o
0m 06.67s: failed to detect media type: sensekey 00 asc 00 acsq 00
0m 06.68s: got max lba 0
0m 06.68s: opening drive E
0m 06.68s: opened i/o
0m 06.68s: failed to detect media type: sensekey 00 asc 00 acsq 00
0m 06.68s: got max lba 0
0m 06.70s: CommmandLine in fabopensource is
0m 07.22s: Profile Manager :: End Load Profile
0m 15.01s: opening iso C:/Users/mrfox/Documents/3d films/WAR_HORSE_D1.iso
0m 15.01s: got media type 15
0m 15.01s: got max lba 11831711
0m 15.02s: got disc type 20
0m 15.02s: type Blu-ray BDMV
0m 15.02s: volume label WAR_HORSE_D1
0m 15.04s: internal path [:/BDMV/
0m 15.05s: aacs 0 bd+ 0
0m 15.05s: got bdmv
0m 15.05s: got discinfo
0m 15.05s: got bdmv
0m 15.07s: got extended bdinfo
0m 15.07s: opened blu-ray
0m 15.51s: ========WorkAttr::SetSource=======
0m 15.51s: Source Title :
0m 15.51s: Source Video Codec : mpeg2
0m 15.51s: Source Video Size Original : 1920 x 800
0m 15.51s: Source Video Size Display : 1920 x 800
0m 15.51s: Source Video FPS : 24000 / 1001
0m 15.51s: Source Video Bitrate : 1200
0m 15.51s: Source Audio Codec : aac
0m 15.51s: Source Audio Bitrate : 0
0m 15.51s: Source Audio Channels : 8
0m 15.51s: Source Audio Volume : 100
0m 15.51s: Work Profile : mkv.h264.ac3
1m 17.46s: ========WorkAttr::SetSource=======
1m 17.46s: Source Title :
1m 17.46s: Source Video Codec : mpeg2
1m 17.46s: Source Video Size Original : 1920 x 800
1m 17.46s: Source Video Size Display : 1920 x 800
1m 17.46s: Source Video FPS : 24000 / 1001
1m 17.46s: Source Video Bitrate : 1200
1m 17.46s: Source Audio Codec : aac
1m 17.46s: Source Audio Bitrate : 0
1m 17.46s: Source Audio Channels : 8
1m 17.46s: Source Audio Volume : 100
1m 17.46s: Work Profile : 3d.m2ts.audiocopy.normal
1m 17.48s: ========WorkAttr::SetSource=======
1m 17.48s: Source Title :
1m 17.48s: Source Video Codec : mpeg2
1m 17.49s: Source Video Size Original : 1920 x 800
1m 17.49s: Source Video Size Display : 1920 x 800
1m 17.49s: Source Video FPS : 24000 / 1001
1m 17.49s: Source Video Bitrate : 1200
1m 17.49s: Source Audio Codec : aac
1m 17.49s: Source Audio Bitrate : 0
1m 17.49s: Source Audio Channels : 8
1m 17.49s: Source Audio Volume : 100
1m 17.49s: Work Profile : 3d.m2ts.audiocopy.normal
1m 17.50s: ========WorkAttr::SetSource=======
1m 17.50s: Source Title :
1m 17.50s: Source Video Codec : mpeg2
1m 17.50s: Source Video Size Original : 1920 x 800
1m 17.50s: Source Video Size Display : 1920 x 800
1m 17.50s: Source Video FPS : 24000 / 1001
1m 17.50s: Source Video Bitrate : 1200
1m 17.50s: Source Audio Codec : aac
1m 17.50s: Source Audio Bitrate : 0
1m 17.50s: Source Audio Channels : 8
1m 17.50s: Source Audio Volume : 100
1m 17.50s: Work Profile : 3d.m2ts.audiocopy.normal
1m 23.67s: ========WorkAttr::SetSource=======
1m 23.67s: Source Title :
1m 23.67s: Source Video Codec : mpeg2
1m 23.67s: Source Video Size Original : 1920 x 800
1m 23.67s: Source Video Size Display : 1920 x 800
1m 23.67s: Source Video FPS : 24000 / 1001
1m 23.67s: Source Video Bitrate : 1200
1m 23.67s: Source Audio Codec : aac
1m 23.67s: Source Audio Bitrate : 0
1m 23.67s: Source Audio Channels : 8
1m 23.67s: Source Audio Volume : 100
1m 23.67s: Work Profile : 3d.m2ts.audiocopy.normal
2m 43.93s: Start check Blu-ray Ripper register status.
2m 43.94s: Use 2D to 3D mode, and this product is: Enable
2m 43.94s: End check Blu-ray Ripper register status: Enable
2m 43.94s: OPList at BD Ripper : (4113.2),(4352.1),(4608.32),(4609.32)
2m 43.94s: Blu-ray ripper check watermark flag: 1
2m 43.94s: Product 2D to 3D Converter watermark flag: 1
2m 43.95s: ------------------ convert work begin(1/1) ------------------
2m 43.95s: info: create config(bluray2video)
2m 43.95s: info: use profile(3d.m2ts.audiocopy.normal)
2m 43.95s: info: bluray playlist(0),angle(0),chapter(1->28),BDAV(no)
2m 43.95s: info: 3D working_mode(2Dto3D), 3D format(overunder_left_right)
2m 43.98s: info: [Video]stream(4113) codec(h264) opcode(compress)
2m 43.99s: info: set output video frame_rate(24000/1001)
2m 44.00s: info: [Audio]stream(4352) codec(dca) opcode(copy) channel(8)
2m 44.00s: info: SubMode(Remux) -- Display only forced subpicture(false)
2m 44.00s: info: [Sub]stream(4608) codec(pgssub) opcode(remux) language(English)
2m 44.00s: info: [Sub]stream(4609) codec(pgssub) opcode(remux) language(English)
2m 44.00s: try to use gpu acceleration(2) for video decoding
2m 44.00s: DXVA GPU acceleration for video decoding enabled
2m 44.00s: info: try to enable gpu acceleration for 2D to 3D !
2m 46.11s: info: not support gpu acceleration for 2D to 3D, try to using advance mode !
2m 46.12s: info: open 2D to 3D option(gain:10, visual_depth:254) successful !
2m 47.16s: info: h264_encode: encode param profile(2) level(41) bitrate(9207)
2m 52.18s: info: processing source(00083.m2ts)
6m 57.20s: info: processing source(00077.m2ts)
7m 11.38s: info: processing source(00079.m2ts)

[glenns]

2m 44.00s: DXVA GPU acceleration for video decoding enabled2m 46.11s: info: not support gpu acceleration for 2D to 3D,

Go into fab settings and under general settings put a check mark in disable all gpu also uncheck lightning recording if its checked.Then try again.

[mrbasilbrush]

hi
many thanks for that.
it now goes all the way through movie until time left 0.00 then stops and does not finish.
I hit cancel in the end. the film is there just need to put it onto blu ray disc to test it.

[glenns]

Post the internal log here as it shouldn't stop at the end and not put up a message that it's done.

[mrbasilbrush]

Post the internal log here as it shouldn't stop at the end and not put up a message that it's done.

thanks for helping

i have so many logs now i'm losing track!!!
hopefully this is the correct one.

DVDFab 9.0.3.2 (2013/04/17 18:08:18)

0m 00.10s: Start preload dll...
0m 00.15s: Load dll successful.
0m 00.15s: Start load fabplay dll...
0m 00.20s: Load fabplay dll successful.
0m 00.20s: Windows os type is: 14.
0m 00.21s: Transfer settings successful.
0m 00.23s: GPUAccelerate: 5
0m 00.23s: CUDA cap: 0
0m 00.23s: Support coreavc decode: 0
0m 00.23s: Graphics info: Intel(R) HD Graphics : :
0m 00.23s: Qt Translator file load success
0m 00.39s: Start get sys number.
0m 00.39s: Serial number is: 50-46-5d-08-5d-89
0m 00.39s: Reg URL link is: https://www.dvdfabstore.com/auth/v2/
0m 00.39s: Version is: 9032
0m 00.39s: Product is: 2
0m 00.39s: Connect type is: 1
0m 01.25s: Times of connecting error is: 0
0m 01.25s: Parse string is: 1:19
0m 01.25s: Parse string is: 2:19
0m 01.25s: Parse string is: 20:17
0m 01.25s: Parse string is: 21:25
0m 01.25s: Parse string is: 70:25
0m 01.25s: Parse string is: OV:9028
0m 01.25s: Parse string is: BV:9033
0m 01.39s: option - 0 : 1 - 2 : 1 - 2 : 1 - 11 : 1 - 20 : 1 - 21 : 1 - 50 : 1 - 60 : 1 - 61 : 1 - 62 : 1 - 80 : 1 - 22 : 1 - 70 : 1 - 71 : 1 - 72 : 1
0m 01.39s: End check info.
0m 01.39s: Load config successful.
0m 01.47s: Init profile data driver sucessful.
0m 01.47s: Init GPU settings sucessful.
0m 05.00s: Begin init preview play engine.
0m 05.00s: Init DirectShow engine successful.
0m 05.15s: Init burn engine successful.
0m 07.04s: Get update info start
0m 07.04s: Product type is: 2
0m 07.04s: Version is: 9033
0m 07.04s: URL link is: http://www.dvdfabstore.com/update/
0m 07.04s: Language type is:
0m 07.21s: opening drive D
0m 07.22s: opened i/o
0m 07.22s: failed to detect media type: sensekey 00 asc 00 acsq 00
0m 07.23s: got max lba 0
0m 07.25s: opening drive E
0m 07.25s: opened i/o
0m 07.25s: failed to detect media type: sensekey 00 asc 00 acsq 00
0m 07.25s: got max lba 0
0m 07.27s: CommmandLine in fabopensource is
0m 07.47s: Profile Manager :: End Load Profile
0m 09.27s: Get update info end with result: <?xml version="1.0" encoding="utf-8"?><update version="1.0"><status value='1'/><download value='http://www.dvdfab.com/mlink/download.php?g=DVDFAB9_BETA'/><changes></changes><date value=''/></update>
0m 09.27s: Update version: 1.0
0m 09.27s: Status is: 1
0m 09.27s: Download url: http://www.dvdfab.com/mlink/download.php?g=DVDFAB9_BETA
0m 09.27s: What's new:
0m 09.27s: Version Data:
2m 13.56s: opening iso C:/Users/mrfox/Documents/3d films/WAR_HORSE_D1.iso
2m 13.56s: got media type 15
2m 13.57s: got max lba 11831711
2m 13.67s: got disc type 20
2m 13.67s: type Blu-ray BDMV
2m 13.67s: volume label WAR_HORSE_D1
2m 13.70s: internal path [:/BDMV/
2m 13.70s: aacs 0 bd+ 0
2m 13.70s: got bdmv
2m 13.70s: got discinfo
2m 13.71s: got bdmv
2m 13.88s: got extended bdinfo
2m 13.89s: opened blu-ray
2m 14.79s: ========WorkAttr::SetSource=======
2m 14.80s: Source Title :
2m 14.80s: Source Video Codec : mpeg2
2m 14.80s: Source Video Size Original : 1920 x 800
2m 14.80s: Source Video Size Display : 1920 x 800
2m 14.80s: Source Video FPS : 24000 / 1001
2m 14.80s: Source Video Bitrate : 1200
2m 14.80s: Source Audio Codec : aac
2m 14.80s: Source Audio Bitrate : 0
2m 14.80s: Source Audio Channels : 8
2m 14.80s: Source Audio Volume : 100
2m 14.80s: Work Profile : mkv.h264.ac3
2m 18.93s: ========WorkAttr::SetSource=======
2m 18.93s: Source Title :
2m 18.93s: Source Video Codec : mpeg2
2m 18.93s: Source Video Size Original : 1920 x 800
2m 18.93s: Source Video Size Display : 1920 x 800
2m 18.93s: Source Video FPS : 24000 / 1001
2m 18.93s: Source Video Bitrate : 1200
2m 18.93s: Source Audio Codec : aac
2m 18.93s: Source Audio Bitrate : 0
2m 18.93s: Source Audio Channels : 8
2m 18.93s: Source Audio Volume : 100
2m 18.93s: Work Profile : mkv.h264.ac3
3m 03.37s: ========WorkAttr::SetSource=======
3m 03.37s: Source Title :
3m 03.37s: Source Video Codec : mpeg2
3m 03.37s: Source Video Size Original : 1920 x 800
3m 03.37s: Source Video Size Display : 1920 x 800
3m 03.37s: Source Video FPS : 24000 / 1001
3m 03.37s: Source Video Bitrate : 1200
3m 03.37s: Source Audio Codec : aac
3m 03.37s: Source Audio Bitrate : 0
3m 03.37s: Source Audio Channels : 8
3m 03.37s: Source Audio Volume : 100
3m 03.37s: Work Profile : 3d.m2ts.audiocopy.normal
3m 03.40s: ========WorkAttr::SetSource=======
3m 03.40s: Source Title :
3m 03.40s: Source Video Codec : mpeg2
3m 03.40s: Source Video Size Original : 1920 x 800
3m 03.40s: Source Video Size Display : 1920 x 800
3m 03.40s: Source Video FPS : 24000 / 1001
3m 03.40s: Source Video Bitrate : 1200
3m 03.40s: Source Audio Codec : aac
3m 03.40s: Source Audio Bitrate : 0
3m 03.40s: Source Audio Channels : 8
3m 03.40s: Source Audio Volume : 100
3m 03.40s: Work Profile : 3d.m2ts.audiocopy.normal
3m 03.41s: ========WorkAttr::SetSource=======
3m 03.41s: Source Title :
3m 03.41s: Source Video Codec : mpeg2
3m 03.41s: Source Video Size Original : 1920 x 800
3m 03.41s: Source Video Size Display : 1920 x 800
3m 03.41s: Source Video FPS : 24000 / 1001
3m 03.41s: Source Video Bitrate : 1200
3m 03.41s: Source Audio Codec : aac
3m 03.41s: Source Audio Bitrate : 0
3m 03.41s: Source Audio Channels : 8
3m 03.41s: Source Audio Volume : 100
3m 03.41s: Work Profile : 3d.m2ts.audiocopy.normal
3m 34.52s: ========WorkAttr::SetSource=======
3m 34.52s: Source Title :
3m 34.52s: Source Video Codec : mpeg2
3m 34.52s: Source Video Size Original : 1920 x 800
3m 34.52s: Source Video Size Display : 1920 x 800
3m 34.52s: Source Video FPS : 24000 / 1001
3m 34.52s: Source Video Bitrate : 1200
3m 34.52s: Source Audio Codec : aac
3m 34.52s: Source Audio Bitrate : 0
3m 34.52s: Source Audio Channels : 8
3m 34.52s: Source Audio Volume : 100
3m 34.52s: Work Profile : 3d.m2ts.audiocopy.normal
4m 17.96s: Start check Blu-ray Ripper register status.
4m 17.96s: Use 2D to 3D mode, and this product is: Enable
4m 17.96s: End check Blu-ray Ripper register status: Enable
4m 17.97s: OPList at BD Ripper : (4113.2),(4352.1),(4608.32),(4609.32)
4m 17.97s: Blu-ray ripper check watermark flag: 1
4m 17.97s: Product 2D to 3D Converter watermark flag: 1
4m 17.97s: ------------------ convert work begin(1/1) ------------------
4m 17.97s: info: create config(bluray2video)
4m 17.97s: info: use profile(3d.m2ts.audiocopy.normal)
4m 17.97s: info: bluray playlist(0),angle(0),chapter(1->28),BDAV(no)
4m 17.97s: info: 3D working_mode(2Dto3D), 3D format(overunder_left_right)
4m 23.49s: info: [Video]stream(4113) codec(h264) opcode(compress)
4m 23.50s: info: set output video frame_rate(24000/1001)
4m 23.50s: info: [Audio]stream(4352) codec(dca) opcode(copy) channel(8)
4m 23.50s: info: SubMode(Remux) -- Display only forced subpicture(false)
4m 23.50s: info: [Sub]stream(4608) codec(pgssub) opcode(remux) language(English)
4m 23.50s: info: [Sub]stream(4609) codec(pgssub) opcode(remux) language(English)
4m 23.50s: info: enable multi-thread software decoder
4m 23.50s: info: try to enable gpu acceleration for 2D to 3D !
4m 25.97s: info: not support gpu acceleration for 2D to 3D, try to using advance mode !
4m 25.98s: info: open 2D to 3D option(gain:10, visual_depth:254) successful !
4m 27.04s: info: h264_encode: encode param profile(2) level(41) bitrate(9207)
4m 31.07s: info: processing source(00083.m2ts)
8m 38.51s: info: processing source(00077.m2ts)
8m 53.38s: info: processing source(00079.m2ts)
307m 22.32s: info: processing source(00080.m2ts)
307m 46.34s: info: processing source(00082.m2ts)

[glenns]

Look at the time and date of your logs newest log should be on the bottom of list this one is dated 4/17 1808 and it still reports 4m 25.97s: info: not support gpu acceleration for 2D to 3D, try to using advance mode so if you turned your gpu acceleration to all software this shouldn't be in the log.

[mrbasilbrush]

hi
thanks for your help again.
i can't find anymore logs for warhorse, so what i'll do is clear all the logs and try it again as since warhorse i've cloned ansd shrunk jack reacher, skyfall etc and its fall of logs.
i will post a log afterwards...you never know i might be lucky and it works this time... ps i put the last warhorse that froze onto disc using img but it didn't play.
maybe i got img settings wrong or maybe the files were corrupt as it froze, not really sure why as it plays on the pc ok with the side by side screens.

[CBR929]

Hi mrbasilbrush
You can also try the latest beta found here http://www.dvdfab.com/mlink/download.php?g=DVDFAB9_BETA and post that log.
CBR929