Announcement

Collapse
No announcement yet.

H.265 Conversion issues on Trial

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • wazoo
    replied
    Originally posted by martythebrit View Post
    A friend of mine has some 4K x264 the're bringing by later in the weekend, I'll try converting to x265 and post the results...
    Much appreciated.

    Cheers!

    Leave a comment:


  • martythebrit
    replied
    A friend of mine has some 4K x264 the're bringing by later in the weekend, I'll try converting to x265 and post the results...

    Leave a comment:


  • martythebrit
    replied
    I'm using the same Nvidia driver as you. I don't have anything in 4K to try and convert...

    Leave a comment:


  • wazoo
    replied
    Originally posted by martythebrit View Post
    I think it should convert the whole file with the watermark. I have no problems converting x264 to x265 on my GTX 1060 using CUDA.
    Ok. Thanks for the info.

    Now... I wonder why this is happening. I've tried different versions of the Nvidia drivers but same problem.

    Have you tried converting 4k? Does CUDA kick in for you?

    Leave a comment:


  • martythebrit
    replied
    I think it should convert the whole file with the watermark. I have no problems converting x264 to x265 on my GTX 1060 using CUDA.

    Leave a comment:


  • wazoo
    started a topic H.265 Conversion issues on Trial

    H.265 Conversion issues on Trial

    Running the Trial 10.0.2.1 to see if I want to purchase.

    I'm running into two problems that I would like to know are either a trial version issue (and thus will go away when I purchase), or something that is the same in the paid version as well and thus a problem.

    1) When converting from h.264 to h.265 using CUDA encoding on my 980 GTXs with 378.49 drivers, the process says it finishes but only about half the movie is actually in the output file. Is this because it is a trial version? It has the watermark, but I thought that was the only limitation. Here are the log entries for my most recent attempt:

    Code:
    ------ process working ------
     0m 00.09s: info, try to open file \\diskstation\video\HD Movies\Minority.Report.2002.mkv
     0m 00.24s: info: open successed, iformat = Matroska / WebM
     0m 00.24s: info: create config(videoconvert)
     0m 00.24s: info: crop value after clone: left = 0 right= 0 top=0 bottom=0 enable=0 mode=0
     0m 00.24s: info: use profile(MKV.H265)
     0m 00.24s: info: file (.mkv)
     0m 00.24s: info: 3D working_mode(disable), 3D format(sbs_lef_right) 
     0m 00.25s: info: stream input@ Video(0)[codec(h264) size(1920*800) fps(24000/1001) interlace(0) duration(8715)sec opcode(compress)]
     0m 00.25s: info: perset file config OK ! 
     0m 00.25s: info: set output video frame_rate(24000/1001)
     0m 00.25s: info: ff bitmap index = 1 
     0m 00.25s: info: recommand= 33562680, Shrink support= 1, enable= 1, cuda_cap= 1 , cpu_count= 4
     0m 00.25s: info: vdecode hevc= 0, h264= 1, vc1= 1, mpeg2= 1, vencode h264= 6, hevc= 6 , plat = 5 
     0m 00.25s: info: stream output Video(0)[codec(hevc) size(1920*800) fps(24000/1001) interlace(0) bitrate(3683) duration(8715)sec]
     0m 00.25s: info: stream input@ Audio(1)[codec(dca) channels(6) sample(48000) bitrate(1536000) bitdepth(0) opcode(compress)]
     0m 00.26s: info: stream output Audio(1)[codec(ac3) channels(6) sample(48000) bitrate(448000) bitdepth(16) opcode(compress)]
     0m 00.26s: info: SubMode(Render) -- Display Only forced Subtitle(false) 
     4m 17.78s: UILog:MsgWork:WorkStatus_Start
     0m 00.26s: CUDA GPU acceleration for video h265 encoding enabled
     0m 00.26s: info: h265_encode: encode param profile(1) level(40) bitrate(3683) crf(-1)
     8m 15.41s: info: audio_decode finish job
     8m 15.41s: audio_encode finish job
     8m 16.69s: 
    ------ process exit ------
    2) CUDA does not work when trying to encode 4k h.264 into h.265. It only does software and it then runs at about 4fps conversion. Is this also a trial limitation or a known problem? Here are the log entries for my 4k attempt. I aborted it about 30 seconds in:

    Code:
    101m 17.76s: Source manager: drag file //diskstation/video/HD Movies/The.Fifth.Element.1997.2160p.mkv
    101m 17.76s: Source manager: add source id 3.
    101m 17.77s: info, try to open file \\diskstation\video\HD Movies\The.Fifth.Element.1997.2160p.mkv
    101m 17.97s: warning: audio info: index 1, codec_id 86061, channels 8, bitrate 0, sample_rate 48000, format 2, bit_per_sample 0, frame_size 0 
    101m 17.97s: warning: audio info: index 2, codec_id 86019, channels 6, bitrate 640000, sample_rate 48000, format 8, bit_per_sample 0, frame_size 0 
    101m 17.97s: warning: audio info: index 3, codec_id 86019, channels 2, bitrate 192000, sample_rate 48000, format 8, bit_per_sample 0, frame_size 0 
    101m 17.97s: info: open successed, iformat = Matroska / WebM
    101m 18.04s: Source manager: open successful.
    101m 18.04s: Source manager: open source flag:1,0,1,1,1
    101m 18.37s: Work manager: create convert work 2 with source 3 and uiinfo 4.
    101m 18.37s: ========WorkAttr::SetSource=======
    101m 18.37s: Source Video Size Original: 3840 x 1606 
    101m 18.37s: Source Video Size Display: 3840 x 1606 
    101m 18.37s: Source Video FPS: 24000 / 1001 
    101m 18.37s: Source Video Bitrate: 1200 
    101m 18.37s: Source Audio Bitrate: 0 
    101m 18.37s: Source Audio Channels: 7 
    101m 18.37s: Source Audio Volume: 100 
    101m 18.37s: Work Profile: MKV.H265 
    101m 38.78s: UILog: OnMsgToolbar_Start
    101m 38.78s: UILog: Msg Start: ready start
    101m 38.79s: UILog: Msg Start: start test run work
    101m 38.79s: UILog: Msg Start: run work
    101m 38.79s: UILog: Run current Work.
    101m 38.80s: UILog: Begin work copy or converter.
    101m 38.80s: Start check Video Converter register status.
    101m 38.80s: End check Video Converter register status: Enable
    101m 38.82s: UILog: start running at thread.
    101m 38.83s: UILog: return flag at start running at thread ok.
    101m 38.84s: OPList at BD Converter : (0.2),(1.1)
    101m 38.84s: Video Converter check watermark flag: 1
    101m 38.84s: ------------------  convert work begin(1/1)  ------------------ 
    101m 38.84s: start process(1/1)
    
    ------ process working ------
     0m 00.09s: info, try to open file \\diskstation\video\HD Movies\The.Fifth.Element.1997.2160p.mkv
     0m 00.37s: warning: audio info: index 1, codec_id 86061, channels 8, bitrate 0, sample_rate 48000, format 2, bit_per_sample 0, frame_size 0 
     0m 00.37s: warning: audio info: index 2, codec_id 86019, channels 6, bitrate 640000, sample_rate 48000, format 8, bit_per_sample 0, frame_size 0 
     0m 00.37s: warning: audio info: index 3, codec_id 86019, channels 2, bitrate 192000, sample_rate 48000, format 8, bit_per_sample 0, frame_size 0 
     0m 00.37s: info: open successed, iformat = Matroska / WebM
     0m 00.38s: info: create config(videoconvert)
     0m 00.38s: info: crop value after clone: left = 0 right= 0 top=0 bottom=0 enable=0 mode=0
     0m 00.38s: info: use profile(MKV.H265)
     0m 00.38s: info: file (.mkv)
     0m 00.38s: info: 3D working_mode(disable), 3D format(sbs_lef_right) 
     0m 00.39s: info: stream input@ Video(0)[codec(h264) size(3840*1606) fps(24000/1001) interlace(0) duration(7588)sec opcode(compress)]
     0m 00.39s: info: perset file config OK ! 
     0m 00.39s: info: set output video frame_rate(24000/1001)
     0m 00.39s: info: ff bitmap index = 1 
     0m 00.39s: info: recommand= 33562680, Shrink support= 1, enable= 1, cuda_cap= 1 , cpu_count= 4
     0m 00.39s: info: vdecode hevc= 0, h264= 1, vc1= 1, mpeg2= 1, vencode h264= 6, hevc= 6 , plat = 5 
     0m 00.39s: info: stream output Video(0)[codec(hevc) size(3840*1608) fps(24000/1001) interlace(0) bitrate(14805) duration(7588)sec]
     0m 00.39s: info: stream input@ Audio(1)[codec(truehd) channels(8) sample(48000) bitrate(0) bitdepth(0) opcode(copy)]
     0m 00.39s: info: stream output Audio(1)[codec(truehd) channels(8) sample(48000) bitrate(0) bitdepth(0) opcode(copy)]
     0m 00.39s: info: SubMode(Render) -- Display Only forced Subtitle(false) 
    101m 40.66s: UILog:MsgWork:WorkStatus_Start
     0m 00.40s: info: enable multi-thread software decoder, thread count = 4
     0m 00.40s: info: ex process path= C:/Program Files (x86)/DVDFab 10/x64/fabcore_x64.exe
     0m 00.42s: info: h265_encode: encode param profile(1) level(50) bitrate(14805) crf(-1)
    102m 09.20s: UILog: OnMsgToolbar_Stop
     0m 29.59s: info: filter:filter_video_decode 
     0m 29.59s: info: fifo:93d4-filter_vtransform-0-1,block:20 
     0m 29.59s: info: filter:filter_h265_ex 
     0m 29.59s: info: fifo:93d4-filter_mux_mkvmerge-0-1,block:0 
     0m 29.59s: info: filter:filter_mux_mkvmerge 
     0m 29.60s: info: filter:filter_vtransform 
     0m 29.60s: info: fifo:93d4-filter_h265_ex-0-1,block:20 
     0m 29.60s: info: filter:filter_common_demux 
     0m 29.60s: info: fifo:93d4-filter_video_decode-0-1,block:19 
     0m 29.60s: info: fifo:93d4-filter_mux_mkvmerge-1-2,block:0 
     0m 31.16s: 
    ------ process exit ------
    102m 12.51s: UILog: MsgWork:current work finish: 4
    102m 12.51s: Source manager: open source flag:1,1,1,1,1
    102m 14.25s: Source manager: open source flag:1,0,1,1,1
    Thanks,

    Wazoo
Working...
X