Encodeing H265 UHD COPY With Cuda

[prologic]

Upto full speed now , using top slot ..first time i tried ..monitor had a fit .. anyway .. only problem i have now.. is am still getting the dvdfab logo , at the top left hand corner , for the first min ..
I have sucsessfully logged in, with name and password as well ... also uninstalled any previous version and done a registry clean as well ..

Thank you .

LICENCE SORTED now .. thank you

[h1jfg]

Wilson.Wang Hi Wilson, I have now tried the GTX1060 and the GTX1070Ti and can confirm that the encoding speed on the GTX1070Ti was only fractionally faster than the GTX1060. Maybe 2-3% faster. Certainly not enough to justify the additional cost of the GTX1070Ti for encoding duties alone. As such I am sticking with the GTX1060. Getting good throughput. Happy with performance.

[hdfills]

im using a 6gb 1060 and an encode @ 20mb a second is taking me 25-30 minutes - great speeds

[Wilson.Wang]

Hi Wilson,
I am using GTX1060 and it re-encodes a 4K UHD in about 35-45 minutes.
The GTX1060 only has 1x NVENC engine, but I believe the GTX1080 has 2x NVENC engines.
On your GTX1080 test rig does DVDFab use both NVENC engines? ANd if so does it encode twice as fast as a GTX1060?

I am thinking about an upgrade to the new GTX 1070Ti but cannot find any information about whether it has 1x or 2x NVENC engines and whether or not both are enabled (e.g. The original GTX1070 had 2x engines but one was disabled).

Thank you.

1 enginer is used now. but the speed will be faster than 1060.

Thanks!

Wilson

[h1jfg]

Hi Wilson,
I am using GTX1060 and it re-encodes a 4K UHD in about 35-45 minutes.
The GTX1060 only has 1x NVENC engine, but I believe the GTX1080 has 2x NVENC engines.
On your GTX1080 test rig does DVDFab use both NVENC engines? ANd if so does it encode twice as fast as a GTX1060?

I am thinking about an upgrade to the new GTX 1070Ti but cannot find any information about whether it has 1x or 2x NVENC engines and whether or not both are enabled (e.g. The original GTX1070 had 2x engines but one was disabled).

Thank you.

[prologic]

hi prologic,

Glad to know, the speed is OK.
The top slot near cpu usually is the fastest one. PCIe speed is important.
If registered, dvdfab log should not show.

Wilson

Upto full speed now , using top slot ..first time i tried ..monitor had a fit .. anyway .. only problem i have now.. is am still getting the dvdfab logo , at the top left hand corner , for the first min ..
I have sucsessfully logged in, with name and password as well ... also uninstalled any previous version and done a registry clean as well ..

Thank you .

[Wilson.Wang]

hi prologic,

Glad to know, the speed is OK.
The top slot near cpu usually is the fastest one. PCIe speed is important.
If registered, dvdfab log should not show.

Wilson

[prologic]

OK ..
I tried dvdfab 9.2.3.7
worked like a charm ..
converting 25gig movie to dvd9 ..
wish i could enter my own encode bitrate .. as I do a lot of 2 movies to 25 gig at about 11 gig each ..this would be invaluable ... anydvd`s clonebd is rubbish with cuda ..
Anyway heres my logs and screens shots , a lot different ..also i set the driver , to an old nvidea ..but works with this dvdfab no matter what version ..

Hurray .. I seem to be having luck .. did my first movie , around 1:35 mins and doing my second now
I updated my bios , but that did not help ...
I WENT IN TO BIOS and change pcle 2.0 slot to x4
am wondering also if my card is in the right slot ..
I have a P8P67 PRO ASUS MUTHERBOARD .. and am using the very bottom socket ..
I found a photo on google , of my mainboard , and they had their card in the top slot .. so i tried that ..and my expensive monitor would not work after ..
was gutted .. no power to monitor ..
I put the card back ... in the same place as before , and was lucky the monitor came back on after a rest ..
So i still dont know for sure .. but the main thing is .. its working ..
The video engine load is variable .. which may be better than full throttle .. even if it took 5 hours , that would be ok for me .. but days is silly ?

one thing .. my first attempt had the dvdfab logo in the left hand screen for a while, and this program is registered ?

I enclose some screen shots

Thanks for being patient ..

looking for a new mutherboard and processor in the new year ..

[prologic]

hi prologic,

Please tell us which version of dvdfab cuda worked fine with the gtx1070, like 10.0.6.4.

And Please dump CPU-Z info,





Wilson

OK ..
I tried dvdfab 9.2.3.7
worked like a charm ..
converting 25gig movie to dvd9 ..
wish i could enter my own encode bitrate .. as I do a lot of 2 movies to 25 gig at about 11 gig each ..this would be invaluable ... anydvd`s clonebd is rubbish with cuda ..
Anyway heres my logs and screens shots , a lot different ..also i set the driver , to an old nvidea ..but works with this dvdfab no matter what version ..

[Wilson.Wang]

hi prologic,

Please tell us which version of dvdfab cuda worked fine with the gtx1070, like 10.0.6.4.

And Please dump CPU-Z info,





Wilson

[prologic]

hi prologic,

Your GPU-Z show "GPU Load" 99%, that's the bottleneck.
Could your check if not run DVDFab, this "GPU Load " is normal? If not play game it shold be less than 10%.

If "GPU Load " still high, please try some old dirver.
fabcheck log show i7-2600K CPU is using, Maybe check the motherboard BIOS update.

Wilson

Hello
I tried cuda on an older version of dvdfab and Anydvd clonebd and cuda worked fine at high speed .. the dvdfab was the better quality of the 2 , but I cant recode custom size ...
I have not played a game , since the Amiga days !! .....
I will try an older driver if i can find one ..

Thank you

[Wilson.Wang]

hi prologic,

Your GPU-Z show "GPU Load" 99%, that's the bottleneck.
Could your check if not run DVDFab, this "GPU Load " is normal? If not play game it shold be less than 10%.

If "GPU Load " still high, please try some old dirver.
fabcheck log show i7-2600K CPU is using, Maybe check the motherboard BIOS update.

Wilson

[prologic]

hi prologic and Chameleon,
We tested on win10 64 bit pro with several videocard gtx1050/gtx1060 and not reproduce this issue.
There are some steps maybe helpful for find the problem.
1. Download new GPU-Z
Run DVDFab UHD Copy, after DVDFab run stable, say 3%. Run GPU-Z switch to Sensors, check "Video Engin Load " part, it should show above 95%.

2. If not , check if hard drive run at high level.
If use nas souce, try direct copy it, see if seed is good above 80MB/s.
Make sure videocard is in the right PCI-E slot. GPU-z , Graphics Card, Bus Interface show PCIe x16 3.0
3. If HDD/SDD speed and web are good. Please reinstall nvidia driver, and select clean install mode.

If the problem still there, please send us your GPU-Z snapshot, and cpu-z dump info.

Prologic here ..
tested the above
enclosed is screen shot with GPU -z ..which going off your picture is way out !!
also the hard drives are very fast enough , tried send it to and ssd card .. for a change ..
Cant understand , the bit about installing a fresh driver ... tried this program on 3 builds and one was just to test this program and nothing else ..

logs sent

Thank you

[Wilson.Wang]

hi prologic and Chameleon,
We tested on win10 64 bit pro with several videocard gtx1050/gtx1060 and not reproduce this issue.
There are some steps maybe helpful for find the problem.
1. Download new GPU-Z
Run DVDFab UHD Copy, after DVDFab run stable, say 3%. Run GPU-Z switch to Sensors, check "Video Engin Load " part, it should show above 95%.

2. If not , check if hard drive run at high level.
If use nas souce, try direct copy it, see if seed is good above 80MB/s.
Make sure videocard is in the right PCI-E slot. GPU-z , Graphics Card, Bus Interface show PCIe x16 3.0
3. If HDD/SDD speed and web are good. Please reinstall nvidia driver, and select clean install mode.

If the problem still there, please send us your GPU-Z snapshot, and cpu-z dump info.

[Chameleon]

Hi,

Thanks for your feedback, we will check it ASAP.


Wilson

I have a 1080GTX and I am experiencing the same issue. Thanks Wilson. You guys are great.