Announcement

Collapse
No announcement yet.

hang before splash screen

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    hang before splash screen

    I was still running on version 8 and just downloaded and installed 9 1 3 6. I am running on Virtual PC XP Mode but I also tried this on a separate pc with a native copy of Windows XP and the symptoms is when I run it, it never displays the splash screen and task manager shows it as not responding. Here is what is in the dvdfab_internal.log file. I have tried yet another XP machine and it runs fine. Any guidance would be appreciated.


    DVDFab 9.1.3.6 (2014/03/31 16:59:57)

    0m 00.03s: Init Public log : enabled.
    0m 00.03s: Init Private log : finish.
    0m 00.04s: App info: 2014-3-20
    0m 00.04s: App info: 9.1.3.6 9136 Official
    0m 00.04s: Init CrashReportSettings : disabled.
    0m 00.04s: Init DVDInfo_Log : enabled.
    0m 00.43s: Profile Manager :: Begin Load Profile
    0m 00.54s: Qt Translator file load success
    0m 00.54s: App info: client type 2.
    0m 00.56s: Fabplay load: preload successful.
    0m 00.62s: Fabplay load: Load successful.
    0m 00.62s: Init process: Transfer settings successful.
    0m 00.62s: info: fabcheck logpath= C:/Documents and Settings/XPMUser/My Documents/DVDFab9/Log/
    0m 00.69s: fab_check_gpu is running ...
    0m 00.83s: fab_check_gpu run successful
    0m 00.83s: info: recommand= 0, Shrink support= 0, enable= 0, cuda_cap= 0 , cpu_count= 1
    0m 00.84s: GPU check: GPUAccelerate-0
    0m 00.84s: GPU check: GPUAccelerate setting-0, 0
    0m 00.85s: GPU check: CUDA cap-0
    0m 00.85s: GPU check: Support coreavc decode-0
    0m 00.85s: GPU check: Lighting shrink status-0, 0
    0m 00.85s: GPU check: Graphics info 1: Virtual PC Integration Components S3 Trio32/64 : :
    0m 00.86s: Init process: first run after install.
    0m 00.87s: Init process: Load config successful.
    0m 00.87s: Init process: Windows os type is 9.
    0m 00.87s: Init process: command line in is
    0m 01.40s: Reg check: Parse string: ( OV:9136 )( BV:9130 )
    0m 01.40s: Reg check: Option check status-Reduce one time.
    0m 01.41s: Reg check: Option check status-Local
    0m 01.41s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):1:0 )-( DVD to DVD:1:0 )-( DVD to Mobile:1:0 )-( Blu-ray to Blu-ray:1:0 )-( Blu-ray to Mobile:1:0 )-( File to Mobile:1:0 )-( Blu-ray to DVD:1:0 )-( File to DVD:1:0 )-( File to Blu-ray:1:0 )-( File Mover:1:0 )-( Blu-ray to 3D:1:0 )-( 2D to 3D:1:0 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-
    0m 01.42s: App info: language type ENU.
    0m 01.43s: Reg check: Start get sys number.
    0m 01.43s: Reg check: Serial number is: 00-03-ff-48-4f-bf
    0m 01.44s: Reg check: Connect type is: 1
    0m 01.53s: Init process: Init GPU settings successful.
    0m 01.81s: Init preview: Begin init preview play engine.
    0m 02.12s: Reg check: Times of connecting error is: 0
    0m 02.13s: Reg check: Parse string: ( BV:9130
    0m 02.33s: Reg check: Option check status-NewWork
    0m 03.62s: Profile Manager :: End Load Profile

    #2
    See this post and apply the patch, hope it helps: http://forum.dvdfab.cn/showthread.ph...tch#post160873
    How to post the internal log


    Things should be made as simple as possible, but no simpler.
    Albert Einstein

    Comment


      #3
      I applied the patch, rebooted just for good measure, but still it hangs before I see the splash screen. Here is my internal log just in case

      DVDFab 9.1.3.6 (2014/04/01 17:51:19)

      0m 00.04s: Init Public log : enabled.
      0m 00.04s: Init Private log : finish.
      0m 00.04s: App info: 2014-3-20
      0m 00.05s: App info: 9.1.3.6 9136 Official
      0m 00.05s: Init CrashReportSettings : disabled.
      0m 00.05s: Init DVDInfo_Log : enabled.
      0m 00.43s: Profile Manager :: Begin Load Profile
      0m 00.48s: Qt Translator file load success
      0m 00.50s: App info: client type 2.
      0m 00.52s: Fabplay load: preload successful.
      0m 00.58s: Fabplay load: Load successful.
      0m 00.58s: Init process: Transfer settings successful.
      0m 00.59s: info: fabcheck logpath= C:/Documents and Settings/XPMUser/My Documents/DVDFab9/Log/
      0m 00.61s: fab_check_gpu is running ...
      0m 00.90s: fab_check_gpu run successful
      0m 00.90s: info: recommand= 0, Shrink support= 0, enable= 0, cuda_cap= 0 , cpu_count= 1
      0m 00.91s: GPU check: GPUAccelerate-0
      0m 00.91s: GPU check: GPUAccelerate setting-0, 0
      0m 00.91s: GPU check: CUDA cap-0
      0m 00.91s: GPU check: Support coreavc decode-0
      0m 00.92s: GPU check: Lighting shrink status-0, 0
      0m 00.92s: GPU check: Graphics info 1: Virtual PC Integration Components S3 Trio32/64 : :
      0m 00.93s: Init process: first run after install.
      0m 00.94s: Init process: Load config successful.
      0m 00.94s: Init process: Windows os type is 9.
      0m 00.95s: Init process: command line in is
      0m 01.42s: Reg check: Parse string: ( OV:9136 )( BV:9130 )
      0m 01.43s: Reg check: Option check status-Reduce one time.
      0m 01.44s: Reg check: Option check status-Local
      0m 01.45s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):1:0 )-( DVD to DVD:1:0 )-( DVD to Mobile:1:0 )-( Blu-ray to Blu-ray:1:0 )-( Blu-ray to Mobile:1:0 )-( File to Mobile:1:0 )-( Blu-ray to DVD:1:0 )-( File to DVD:1:0 )-( File to Blu-ray:1:0 )-( File Mover:1:0 )-( Blu-ray to 3D:1:0 )-( 2D to 3D:1:0 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-
      0m 01.45s: App info: language type ENU.
      0m 01.46s: Reg check: Start get sys number.
      0m 01.47s: Reg check: Serial number is: 00-03-ff-48-4f-bf
      0m 01.47s: Reg check: Connect type is: 1
      0m 01.51s: Init process: Init GPU settings successful.
      0m 01.80s: Init preview: Begin init preview play engine.
      0m 02.16s: Reg check: Times of connecting error is: 0
      0m 02.16s: Reg check: Parse string: ( BV:9130
      0m 02.26s: Reg check: Option check status-NewWork
      0m 03.36s: Profile Manager :: End Load Profile

      Comment


        #4
        Please follow these steps:
        1. Uninstall DVDfab first.
        2. Reinstall DVDFab V9136.
        3. Go to "C:\Documents and Settings\xxx\application Data\DVDFab9".
        4. Edit the config .xml file with TXT or Notepad.
        5. Search "PreviewDirectShow" and set to "1" manually.
        6. Start DVDFab.

        Wilson
        Please post your logs the default location is:
        For DVDFab 13: C:\Users\User Name\My Documents\DVDFab\DVDFab13\Log
        For StreamFab: C:\Users\User Name\My Documents\DVDFab\StreamFab\log
        Please use attachment button and attach your most recent, Internal log and post right here.
        If it's the burning issue, please also attach burn log.

        Thanks!

        Comment


          #5
          Ok, I have tried this suggestion but I still have the same symptom. Is there any other data I could provide which might be helpful to isolate what is happening?

          Comment


            #6
            Still no other suggestions?

            Comment


              #7
              I updated to the 9.1.3.8 release. The symptom is still the same, I never get to see the splash screen. This time when I right clicked to kill this (in the lower bar showing running apps) it displayed the DVDFab app screen, although it was non-responsive to mouse clicks. Task manager showed it running but it wasn't doing screen updates. I looked in the internal log and now there is more data. Hopefully this additional data will point to the cause of the problem.

              DVDFab 9.1.3.8 (2014/04/08 14:26:17)

              0m 00.24s: Init Public log : enabled.
              0m 00.24s: Init Private log : finish.
              0m 00.24s: App info: 2014-4-8
              0m 00.24s: App info: 9.1.3.8 9138 Beta
              0m 00.25s: Init CrashReportSettings : disabled.
              0m 00.25s: Init DVDInfo_Log : enabled.
              0m 00.25s: Init Qt_Log : disabled.
              0m 01.58s: Profile Manager :: Begin Load Profile
              0m 01.65s: Qt Translator file load success
              0m 01.66s: App info: client type 2.
              0m 01.68s: Fabplay load: preload successful.
              0m 01.74s: error: create module(fabHwCodec_dll) failed(fabHwCodec_dll fabHwCodec_load_dll_failed)
              0m 01.74s: Fabplay load: Load failed.
              0m 01.74s: Init process: Transfer settings successful.
              0m 01.74s: GPU check: Failed to get graphics info.
              0m 01.75s: Init process: Load config successful.
              0m 01.76s: Init process: Windows os type is 9.
              0m 01.76s: Init process: command line in is
              0m 02.99s: Reg check: Option check status-Failed
              0m 02.99s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):0:0 )-( DVD to DVD:0:0 )-( DVD to Mobile:0:0 )-( Blu-ray to Blu-ray:0:0 )-( Blu-ray to Mobile:0:0 )-( File to Mobile:0:0 )-( Blu-ray to DVD:0:0 )-( File to DVD:0:0 )-( File to Blu-ray:0:0 )-( File Mover:1:0 )-( Blu-ray to 3D:0:0 )-( 2D to 3D:0:0 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-
              0m 02.99s: App info: language type ENU.
              0m 03.00s: Reg check: Start get sys number.
              0m 03.01s: Reg check: Serial number is: 00-03-ff-48-4f-bf
              0m 03.01s: Reg check: Connect type is: 1
              0m 03.62s: Reg check: Times of connecting error is: 0
              0m 03.62s: Reg check: Parse string: ( OV:9138 )( BV:9137
              0m 04.00s: Reg check: thread exit normal.
              0m 04.01s: Reg check: Option check status-NewWork
              0m 04.01s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):1:0 )-( DVD to DVD:1:0 )-( DVD to Mobile:1:0 )-( Blu-ray to Blu-ray:1:0 )-( Blu-ray to Mobile:1:0 )-( File to Mobile:1:0 )-( Blu-ray to DVD:1:0 )-( File to DVD:1:0 )-( File to Blu-ray:1:0 )-( File Mover:1:0 )-( Blu-ray to 3D:1:0 )-( 2D to 3D:1:0 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-
              0m 04.02s: Reg check: connect successful and result code is 1.
              0m 04.02s: Reg check: End check info.
              0m 04.16s: Init process: Init GPU settings successful.
              0m 04.52s: Profile Manager :: End Load Profile
              0m 04.72s: Init preview: Begin init preview play engine.
              0m 04.72s: Init preview: Begin init preview play engine(XBMC).
              0m 06.39s: Init preview: Init internal engine successful.
              0m 07.80s: Burn engine: start init.
              0m 09.08s: Burn engine: engine type-0.
              0m 09.09s: Burn engine: writer count 0.
              0m 09.09s: Burn engine: end init.
              0m 09.85s: Init process: Init setting page successful.
              0m 09.85s: QtLog Mode = false
              0m 09.85s: Show QNagDlg Dlg
              0m 21.57s: Show ProductsInfo Dlg 3
              160m 11.40s: Show UI Step 2
              160m 11.78s: Show UI Step 3
              160m 11.79s: Start show MainUI.
              160m 11.79s: Show QUserExperienceDlg Dlg 1
              163m 09.86s: Show QUserExperienceDlg Dlg 2
              163m 09.87s: UI manager: switch to Copy mode.
              163m 10.38s: allow_test : false
              163m 10.39s: fab_app_path : C:/Program Files/DVDFab 9/
              163m 10.39s: current_version_type : Official
              163m 10.39s: update_temp_path : C:/Documents and Settings/XPMUser/My Documents/DVDFab9/Temp/updateTemp/
              163m 10.39s: current_version : 9136
              163m 10.40s: language_name : ENU
              163m 10.40s: qm_file : C:/Program Files/DVDFab 9/QLanguage/DVDFabQt_ENU.qm
              163m 10.40s: allow_beta : false
              163m 10.47s: Init process: init main ui successful.
              163m 11.58s: Init process: show main ui successful.
              163m 11.59s: DriveX msg: Init driveX D with I/O mode: 0
              163m 11.61s: DriveX msg: Init driveX E with I/O mode: 0
              163m 11.64s: opening drive D
              163m 11.64s: opened i/o
              163m 11.65s: got media type 4
              163m 14.58s: got max lba 2295060
              163m 14.58s: got disc type 10
              163m 14.66s: type DVD-VIDEO
              163m 14.66s: volume label RED_2
              163m 14.67s: DriveX msg: add media in driveX D.
              163m 14.68s: DriveX msg: send open media msg to thread for driveX D.
              163m 14.68s: opening drive E
              163m 14.69s: opened i/o

              Comment


                #8
                Try a clean uninstall. Uninstall the run CCleaner on the registry until no errors are found, no need to save between scans. May take more than one scan then reinstall and give it a go. Free version of CCleaner HERE
                How to post the internal log


                Things should be made as simple as possible, but no simpler.
                Albert Einstein

                Comment


                  #9
                  Hi Rob Williams
                  Did you reinstall the patch my friend posted in post #2?
                  CBR929
                  Even if it's a little thing, do something for those who have need of help, something for which you get no pay but the privilege of doing it.


                  Setting Up ImgBurn and DVDFab to work together

                  Tips for Posting DVDFab Logs in the Forum

                  Comment


                    #10
                    I am sort of having the same problem. As soon as the DVD Fab splash screen comes up it says it is accessing the server and it just hangs and becomes non-responsive. What is going on and what is the fix?

                    Comment

                    Working...
                    X