DVDFab 6.2.0.0 Beta (with BD+ support)

[Blurayfan]

I've got some testing to do. So far Quantum of Solace was not successful.

[Blurayfan]

Transformers: Revenge of the Fallen and Pelham 123 were both scanned without crashing.

[audiophile]

well i am running vista x64. Install was good.

I will be testing tonight Master and Commander, and the die hard quadriliogy.

I will be testing main movie mode, scanning the disk before burning, and also saving all logs (checked the boxes)

Post updates as they come in

[An00bis]

Transformers 2 - RC2 Europe - Successfully ripped "Movie only" and compressed overnight. Flawless performance. Continue testing.

[alan7]

HI
I am new to this
I have also purchased a lifetime licence of blu-ray to bluray

can you send me the link to the 6.2.0.0 beta,I have been waiting for BD+ support for 5 months now and would love to try it

Alan

[W&B]

Tried "Night at The Museum" on win 7 x32 and Fab crashed, I'm convinced TD and I have two different disc (different protection scheme even though we're both region A). I did rip it to an iso removing all protection and tried using that with Fab and still crashed. The gui is slightly glitchy with the Pathplayer sliders, once you move them you can't read the changing numbers and also in the write media size the defaults are set fine but for example DVD5 normally has a custom setting of 4472 but instead it's 4920, actually their all off for the custom size selection but thats no biggie, you can change them manually. I am very impressed with this beta, just a tweak here and there and this bad boy is ready to roll!

[An00bis]

X-Men Wolverine crashes.

Log:

DVDFab 6.2.0.0 (2009/11/07 12:26:43)

0m 02.66s: detected blu-ray
0m 05.07s: drive J
0m 05.07s: volume label WOLVERINE_ORIGINS_F3
0m 05.07s: detected blu-ray
0m 05.07s: drive J
0m 05.07s: volume label WOLVERINE_ORIGINS_F3
0m 06.83s: root 8CBE34FEEC41ABC8_VOLUME_SET_ID:WOLVERINE_ORIGINS_F 3:WOLVERINE_ORIGINS_F3:WOLVERINE_ORIGINS_F3
0m 08.50s: aacs 1 bd+ 1

FAB closes with a warning, that the program crashed. Nothing else
Windows 7 - 32bit - LG burner

[audiophile]

ok master and commander is as follows.

it ran thorugh scan process to 100%
It appeared to copy 100% 36 gig worth in an ISO.

However when i go to play it with powerdvd mounting it through virtual drive it plays for about 1 second from start to finish (shown as a blank screen but the movie timeline marker about 1 second long).

It you want any other info let me know. will try die hard series now.


2009-11-07 21:45:16 ---- ******************** Log session stop 07-Nov 21:45:16.442 PID 2524********************
2009-11-07 21:25:09 Info Writable disc Hard Disc inserted. Ready to write
2009-11-07 21:25:09 Info WRITE SUCCESS: Disc written
2009-11-07 21:07:39 Info Scanned files #12, folder #15 - total size 35536329356 b. (33.1 Gb.)
2009-11-07 21:07:39 Info Inserted media type : Hard Disc
2009-11-07 21:07:39 Info Write started
2009-11-07 21:07:37 Info New ISO path selected : F:\ISO\MAC_F1.iso
2009-11-07 19:37:46 Info Current Drive selected : 2:5:0 - PIONEER BD-ROM BDC-202 1.07 [Z] (Scsi)
2009-11-07 19:37:46 Info Using Advanced SPTI interface
2009-11-07 19:37:46 Info System default language : English (Australia)
2009-11-07 19:37:46 Info User default language : English (Australia)
2009-11-07 19:37:46 Info DLL Version : 4.0.5.464
2009-11-07 19:37:46 Info DLL : C:\Program Files (x86)\DVDFab 6\vso_hwe.dll
2009-11-07 19:37:46 Info Version : 6, 2, 0, 0
2009-11-07 19:37:46 Info ExeName : C:\Program Files (x86)\DVDFab 6\DVDFab.exe
2009-11-07 19:37:46 Info OS : Microsoft Windows Vista Ultimate (Build 6001: Service Pack 1)
2009-11-07 19:37:46 ---- ******************** Log session start 07-Nov 19:37:46.746 PID 2524********************



DVDFab 6.2.0.0 (2009/11/07 19:37:45)

0m 02.43s: detected blu-ray
0m 02.51s: drive Z
0m 02.51s: volume label MAC_F1
0m 03.76s: root 376883D3MAC_F1:MAC_F1:MAC_F1:MAC_F1
0m 04.02s: aacs 1 bd+ 1
0m 05.33s: got discinfo
0m 05.49s: got bdmv
0m 05.58s: got agid
0m 06.14s: sent host cert chal
0m 06.17s: got drive cert chal
0m 06.36s: got drive key
0m 07.41s: got host key signature
0m 07.41s: verified drive signature
0m 07.41s: verified host signature
0m 07.98s: sent host signature and key point
0m 07.98s: got bus key
0m 08.39s: got volume id
0m 08.39s: got volume id mac
0m 08.39s: volume id is correct
0m 08.39s: got vid
0m 14.16s: got vuk
0m 14.16s: got fut
0m 14.21s: got unit key 1
0m 16.50s: got extended bdinfo

[fengtao]

Dear all,

We can reproduce a crash problem when opening some BD+ discs, and a new version will be out very soon, please wait.

Best Regards,
Fengtao

[touchdown_1]

OK, just ripped "The Simpsons" full disc, tried it in main to compress and got the dreaded process failed error message, but happy to report in full no problem.

[Smabbage]

Thanks Fengtao, looking forward to it.

[driggle]

Ripped ID4 to 25gb disc. Reported as ok but when placed in PS3 goes to blank screen. Does the same thing with PowerDVD.

[docgoo1]

I was able to copy pelham to dvd9 on second try. First try video driver crashed and recovered win 7 64. Had to diable dxva.



DVDFab 6.2.0.0 (2009/11/07 18:04:22)

0m 06.17s: detected dvd
0m 06.17s: drive D
0m 06.17s: video dvd 0
0m 06.17s: volume label
0m 06.18s: detected blu-ray
0m 06.31s: drive F
0m 06.31s: volume label PELHAM_123
0m 42.09s: root 8CC008F308554BA2_VOLUME_SET_ID:PELHAM_123:PELHAM_1 23:PELHAM_123
0m 44.64s: aacs 1 bd+ 0
0m 47.59s: got discinfo
0m 47.85s: got bdmv
0m 47.92s: got agid
0m 48.20s: sent host cert chal
0m 48.28s: got drive cert chal
0m 48.70s: got drive key
0m 49.67s: got host key signature
0m 49.67s: verified drive signature
0m 49.67s: verified host signature
0m 50.18s: sent host signature and key point
0m 50.18s: got bus key
0m 50.25s: got volume id
0m 50.25s: got volume id mac
0m 50.25s: volume id is correct
0m 50.25s: got vid
0m 50.84s: got vuk
0m 50.89s: got unit key 4
1m 06.42s: got extended bdinfo
19m 41.31s: playlist 223 playlen 6355
19m 41.31s: pid 4113 cbr 0 vbr 21037
19m 41.31s: pid 4352 cbr 1314 vbr 3066
19m 41.31s: pid 4353 cbr 545 vbr 0
19m 41.32s: pid 4354 cbr 1314 vbr 2242
19m 41.32s: pid 4355 cbr 1314 vbr 2247
19m 41.32s: pid 4356 cbr 545 vbr 0
19m 41.32s: pid 4357 cbr 181 vbr 0
19m 41.32s: pid 4358 cbr 181 vbr 0
19m 41.32s: pid 4608 cbr 0 vbr 43
19m 41.32s: pid 4609 cbr 0 vbr 35
19m 41.32s: pid 4610 cbr 0 vbr 43
19m 41.32s: pid 4611 cbr 0 vbr 30
19m 41.32s: pid 4612 cbr 0 vbr 37
19m 41.32s: pid 4613 cbr 0 vbr 39
19m 41.32s: pid 4614 cbr 0 vbr 0
19m 41.32s: pid 4615 cbr 0 vbr 68
19m 41.32s: pid 4616 cbr 0 vbr 72
19m 41.32s: pat/pmt/sit 49
19m 41.32s: pcr 1
19m 41.32s: non video 2395
19m 41.34s: video reencode bitrate 7049957
19m 41.35s: DXVA GPU Acceleration start ...
20m 04.06s: filter(3 m:3): not get decoded frame(280-3)
20m 04.06s: filter(3 m:3): not get decoded frame(280-3)
20m 04.06s: filter(3 m:3): not get decoded frame(280-3)
20m 04.06s: filter(3 m:3): not get decoded frame(280-3)
20m 04.06s: filter(3 m:3): not get decoded frame(280-3)
20m 04.06s: filter(3 m:3): not get decoded frame(280-3)
20m 04.06s: filter(3 m:3): not get decoded frame(280-3)
20m 04.06s: filter(3 m:3): not get decoded frame(280-3)
20m 04.06s: filter(3 m:3): not get decoded frame(280-3)
20m 04.07s: filter(3 m:3): not get decoded frame(280-3)
20m 04.07s: filter(3 m:3): not get decoded frame(280-3)
20m 04.07s: filter(3 m:3): not get decoded frame(280-3)
20m 04.07s: filter(3 m:3): not get decoded frame(280-3)
20m 04.07s: filter(3 m:3): not get decoded frame(280-3)
20m 04.07s: filter(3 m:3): not get decoded frame(280-3)
20m 04.07s: filter(3 m:3): not get decoded frame(280-3)
20m 04.07s: filter(3 m:3): not get decoded frame(280-3)
20m 04.07s: filter(3 m:3): not get decoded frame(280-3)
20m 04.07s: filter(3 m:3): not get decoded frame(280-3)
20m 04.09s: filter(3 m:3): not get decoded frame(280-3)
20m 04.09s: filter(3 m:3): not get decoded frame(280-3)
20m 04.09s: filter(3 m:3): not get decoded frame(280-3)
20m 04.09s: filter(3 m:3): not get decoded frame(280-3)
20m 04.09s: filter(3 m:3): not get decoded frame(280-3)
20m 04.09s: filter(3 m:3): not get decoded frame(280-3)
20m 04.09s: filter(3 m:3): not get decoded frame(280-3)
20m 04.09s: filter(3 m:3): not get decoded frame(280-3)
20m 04.09s: filter(3 m:3): not get decoded frame(280-3)
20m 04.09s: filter(3 m:3): not get decoded frame(280-3)
20m 04.10s: filter(3 m:3): not get decoded frame(280-3)
20m 04.10s: filter(3 m:3): not get decoded frame(280-3)
20m 04.10s: filter(3 m:3): not get decoded frame(280-3)
20m 04.10s: filter(3 m:3): not get decoded frame(280-3)
20m 04.10s: filter(3 m:3): not get decoded frame(280-3)

[ishkan4]

HI .

I have purchased a lifetime licence of blu-ray to bluray

can you send me please the link to the 6.2.0.0 beta,I have been waiting for BD+ support ,thanks.

[GregiBoy]

Please read this post here.... Also please read the first post in this thread.