DVDFab Forum - Wont read disk

Announcement

Collapse
No announcement yet.

Wont read disk

Collapse
This topic is closed.
X
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Wont read disk

    I have two lite-on drives. Both copy bluray. When using dvdfab my problem is: When it first starts, it says there is a disk in the target drive. Then when it gets done copying, it gives me a message something like "trying to detect writeable disk in drive". It never detects it. My computer says it is there. On my other drive, it will start to write and eject when it is halfway saying "dvd failed to burn". Trying to copy duel layer dvd-9, on either drive, it say there is no disk in the drive. I am using Optical Quantum blank disks. It also wouldn't detect a blank Sony. They worked fine the first 200 tries on my first drive. Then I bought the second. It has all the same problems. I have taken dvdfab off my computer and put it back on several time with no results.
    I also has other software whick does read the disks(not capable of reading bluray. Only dvd-5 or dvd-9), so I am thinking the problem is in dvdfab.
    Any idea's.
    Thanks
    Boney
    Last edited by Grun; 08-15-2011, 06:32 PM. Reason: policy

  • #2
    thanx grunon

    thanx grunon. my error

    Comment


    • #3
      Failed to burn

      I was successful over 200 times copying Bluray to bluray. All of a sudden I get ejected with 50% to 99% done and with the message "failed to burn. Do you want to burn another". I say I do, and I keep getting the same results. I have reenstalled dvdfab several times and get the same results. I'm using Optical Quantum blanks with over 200 past successes. Any ideas. Thanks

      Comment


      • #4
        post a log
        also does it do it with other movies

        Comment


        • #5
          Two threads on same subject merged.

          Comment


          • #6
            wont read disk

            Yes, it has done this to the last 10 or so movies. How do I find the log? I just bought some memorex disks and have the same results.

            Comment


            • #7
              Found Log

              Sorry to be so much trouble. Here is the log(I hope this is all you need. If not, I'll get more at your request). thanks

              2011-08-15 15:28:51 ---- ******************** Log session stop 15-Aug 15:28:51.096 PID 1176********************
              2011-08-15 15:24:24 Info Disc ejected by user while parsing.
              2011-08-15 15:24:19 Info Parsing disc ...
              2011-08-15 15:24:08 Info Disc () not empty.
              2011-08-15 15:14:14 Info Writable disc DL DVD+R inserted. Ready to write
              2011-08-15 15:13:58 Info Parsing disc ...
              2011-08-15 15:13:52 Info Disc ejected by user.
              2011-08-15 14:55:03 Info Writable disc DL DVD+R inserted. Ready to write
              2011-08-15 14:54:49 Info Parsing disc ...
              2011-08-15 14:54:44 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R, Blu Ray-R Seq., Blu Ray-R Rnd., Blu Ray-RE
              2011-08-15 14:54:44 Info Drive has Serial ATA physical interface
              2011-08-15 14:54:44 Info New Drive selected : 0:1:0 - ATAPI iHBS112 2 CL0K [E] (Scsi)
              2011-08-15 14:54:18 Info Disc ejected by user.
              2011-08-15 14:46:58 Error INIT ERROR: Writing device initialization failed - sense: Code 04 3E 02 [HW error, Timeout on logical unit]
              2011-08-15 14:46:58 Error Init DVD+R Dual Layer: Write cancelled, Your media is still usable.
              2011-08-15 14:46:58 Error Init DVD+R Dual Layer: Failed to set layer change to LBA 2076640 (3.96 Gb.) - Code 04 3E 02 [HW error, Timeout on logical unit]
              2011-08-15 14:45:32 Info Writing speed requested x4.0, effective x4.0
              2011-08-15 14:45:30 Info layer break set by filesystem builder at 0
              2011-08-15 14:45:30 Info Available write speed: 4x
              2011-08-15 14:45:30 Info Media ID: RICOHJPN-D01-43
              2011-08-15 14:45:30 Info Media type: Dual Layer DVD+R
              2011-08-15 14:45:30 Info Scanned files #12, folder #2 - total size 8504739840 b. (7.92 Gb.)
              2011-08-15 14:45:30 Info Inserted media type : DL DVD+R
              2011-08-15 14:45:30 Info Write started
              2011-08-15 13:23:24 Info Writable disc DL DVD+R inserted. Ready to write
              2011-08-15 13:23:22 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R, Blu Ray-R Seq., Blu Ray-R Rnd., Blu Ray-RE
              2011-08-15 13:23:22 Info Drive has Serial ATA physical interface
              2011-08-15 13:23:22 Info New Drive selected : 0:1:0 - ATAPI iHBS112 2 CL0K [E] (Scsi)
              2011-08-15 13:21:40 Info Current Drive selected : 0:1:0 - ATAPI iHBS112 2 CL0K [E] (Scsi)
              2011-08-15 13:21:40 Info Using Advanced SPTI interface
              2011-08-15 13:21:40 Info System default language : English (United States)
              2011-08-15 13:21:40 Info User default language : English (United States)
              2011-08-15 13:21:40 Info DLL Version : 4.0.20.488
              2011-08-15 13:21:40 Info DLL : C:\Program Files (x86)\DVDFab 8 Qt\vso_hwe.dll
              2011-08-15 13:21:40 Info Version : 8, 1, 1, 2
              2011-08-15 13:21:40 Info ExeName : C:\Program Files (x86)\DVDFab 8 Qt\DVDFab.exe
              2011-08-15 13:21:40 Info OS : Microsoft Windows 7 Home Premium (Build 7601: Service Pack 1)
              2011-08-15 13:21:40 ---- ******************** Log session start 15-Aug 13:21:40.585 PID 1176********************


              2011-08-15 11:31:37 ---- ******************** Log session stop 15-Aug 11:31:37.653 PID 5172********************
              2011-08-15 11:29:07 Info Current Drive selected : 0:1:0 - ATAPI iHBS112 2 CL0K [E] (Scsi)
              2011-08-15 11:29:07 Info Using Advanced SPTI interface
              2011-08-15 11:29:07 Info System default language : English (United States)
              2011-08-15 11:29:07 Info User default language : English (United States)
              2011-08-15 11:29:07 Info DLL Version : 4.0.20.488
              2011-08-15 11:29:07 Info DLL : C:\Program Files (x86)\DVDFab 8 Qt\vso_hwe.dll
              2011-08-15 11:29:07 Info Version : 8, 1, 1, 2
              2011-08-15 11:29:07 Info ExeName : C:\Program Files (x86)\DVDFab 8 Qt\DVDFab.exe
              2011-08-15 11:29:07 Info OS : Microsoft Windows 7 Home Premium (Build 7601: Service Pack 1)
              2011-08-15 11:29:07 ---- ******************** Log session start 15-Aug 11:29:07.800 PID 5172********************

              Comment


              • #8
                Originally posted by boney View Post
                2011-08-15 14:46:58 Error INIT ERROR: Writing device initialization failed - sense: Code 04 3E 02 [HW error, Timeout on logical unit]
                2011-08-15 14:46:58 Error Init DVD+R Dual Layer: Write cancelled, Your media is still usable.
                2011-08-15 14:46:58 Error Init DVD+R Dual Layer: Failed to set layer change to LBA 2076640 (3.96 Gb.) - Code 04 3E 02 [HW error, Timeout on logical unit]
                You can try the following steps to see the result.

                1) Restart your PC;

                2) Check if your Blu-ray drive power can supply enough. Maybe you can change a larger power;

                3) Try to put the blank disc in the Blu-ray drive and let it be fully finished recognizing it before you tell DVDFab to burn.

                Anny

                Comment


                • #9
                  Sorry, I don't know what that means. How do I check the bluray drive power to see if it has enough?
                  Thanks

                  Comment


                  • #10
                    boney,

                    I had 2 movies awhile back that the burn all of a sudden failed. I then ran ccleaner to remove files and then ran the registry portion. I then ran a registry cleaner called eusing which you can donate to if you want. You'd be shocked how much more this software finds than ccleaner. I then defragged the hard drive. I haven't had a problem since. I do this very often now. Blu ray disks are huge and it doesn't take many to fragment your hard drive. I don't have 2 blu ray burners as you do, which could be part of your problem, but you could try my way and see if it helps as it did for me.

                    Comment


                    • #11
                      Failed to open

                      E is my target. Now I am always getting the message "Failed to open E:\. Check to see if it is playable". This happens when I start a new BD to BD.
                      Sometimes it will burn and sometimes not. It also comes up if I do a second and third burn. It asks the same with all blanks dvd5 dvd9 BD
                      Last edited by boney; 08-16-2011, 07:20 PM. Reason: ad information

                      Comment


                      • #12
                        Hi boney.

                        Just perused your thread.
                        The easiest and simplest next step for you is to give Img a try.

                        VSO is fine for many users, but becomes problematic for many as well.
                        With respect to your problem, VSO is becoming confused with the layer break issue...I'm not sure why.

                        Click on the link in my sig for D/L site and setup of Img.

                        Also, RICOHJPN-D01-43 is margianl quality media and while I know you've had good luck with it in the past, you will almost certainly have some bad luck.
                        Do yourself a favor and pick up some Verbatim +R DL (look for made in Singapore on the spindle label).

                        As long as you've got the RICOH's, go ahead and give one of 'em a whirl with Img.
                        Let us know what happens.
                        Hope this helps
                        Last edited by maineman; 08-16-2011, 08:33 PM.
                        If it ain't broke, don't fix it!

                        You know how to whistle, don't you, Steve? You just put your lips together and... blow. | Lauren Bacall | "To Have and Have Not" (1944).

                        Comment


                        • #13
                          I'm ready to give up

                          I have tryed everything that I have understood that was suggested to me but nothing has worked. I keep getting ejected part way through burning onto a blank disk. I have taken everything off my computer and re-loaded them back on. I have switched to igmburn and that doesn't work. Using Bluray it ejects Optical Quantum and memorex BD disks. QQ and memorex BD to Double layer(ejected). QQ, memorex and BD to dvd5(ejected). I have tryed burning from E: to F:, from F: to E:, E: to E:, F to F:,.. It will burn non-bluray. dvd9 to dvd9, dvd5 to dvd5 etc etc.

                          I keep buying differant trpes of blanks. I now have over 300 blank BD's and 200 dvd9 and dvd5. I am running out of money.

                          I had over 200 success to begin with. Now nothing.

                          Comment


                          • #14
                            I'm trying to connect the dots here, but not having much luck except I get that you're becoming broke and are ready to throw in the towel.

                            You said Blu-ray copy always fails when writing to blank media.

                            I note this error in the last log you posted.

                            2011-08-15 14:46:58 Error Init DVD+R Dual Layer: Write cancelled, Your media is still usable..

                            This tells me that the media is still usable...never burned at all
                            Is this the case?
                            (Recall I mentioned VSO and the "problem" layer break)

                            You seem to be saying the media fails during the burn.

                            The atapi error also "points to" a drive problem, but still, the cause is unclear.

                            Could you post an Img log please?

                            This all seemed to have gone south with the installation of the 2nd BD LiteOn.

                            Have you tried uninstalling this burner?
                            If not please do so via Device Manager.
                            Windows will reinstall and assign the appropriate drivers.

                            If still no go, physically unplug the 2nd litey and see if Fab will perform correctly.

                            Are you able to burn BD blank media with other software with this 2nd litey drive?

                            How about BD files to dvd5 and dvd9 blank media?

                            I assume that that the BD files you're trying to burn playback when viewed from the hdd.

                            Also, when posting info about blank media...the MID (such as RICOHJPN-D01-43)
                            is the best reference for us.
                            Naming a brand like memorex doesn't tell us anything except it was probably made by the cheapest bidder using cheap materials...but not necessarily.
                            If it ain't broke, don't fix it!

                            You know how to whistle, don't you, Steve? You just put your lips together and... blow. | Lauren Bacall | "To Have and Have Not" (1944).

                            Comment


                            • #15
                              Wont burn

                              The reason I bought the second lireon was the first was only burning halfway and quiting(ejecting or says "DVD Failed to burn. Do you want to burn another". Now both drives are doing the same thing. All burned movies before this problem started, play back great.
                              Some of the disks that say they are unused were not readable according to dvdfab(however, my computer said they were in the drive and empty).
                              You mention VSO and "problem layer break". I switched from VSO to IGM. But I don't understand "Problem layer break"(sorry). Both drives are doing the same thing.

                              Here is my latest log(I hope it's what you need). It only got to 2% before it quit.

                              I'm going to uninstall the burners now.

                              Thanks for all your help.

                              DVDFab 8.1.1.2 (2011/08/17 14:41:55)

                              0m 01.45s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
                              0m 01.45s: Qt Translator file load success
                              0m 07.45s: detected blu-ray
                              0m 07.45s: drive F
                              0m 07.45s: blu-ray type 1
                              0m 07.45s: volume label ENFORCER_WW
                              0m 07.53s: aacs 1 bd+ 0
                              0m 08.29s: got discinfo
                              0m 08.31s: got bdmv
                              0m 08.33s: Vendor: ATAPI
                              0m 08.33s: Product: iHBS212 2
                              0m 08.33s: Revision: 5L09
                              0m 08.33s: Vendor specific: 2011/02/23 14:18
                              0m 08.33s: AACS version: 1
                              0m 08.33s: Number of concurrent AGIDs: 2
                              0m 08.33s: Supports bus encryption: NO
                              0m 08.33s: Supports binding nonce generation: NO
                              0m 08.33s: Supports Hybrid discs: YES
                              0m 08.33s: got agid 0
                              0m 08.39s: sent host cert chal
                              0m 08.39s: got drive cert chal
                              0m 08.40s: BEC 0
                              0m 08.40s: DRIVE_VENDOR 0x0128
                              0m 08.48s: got drive key
                              0m 08.92s: got host key signature
                              0m 08.92s: verified drive signature
                              0m 08.92s: verified host signature
                              0m 09.00s: sent host signature and key point
                              0m 09.00s: got bus key
                              0m 09.01s: got agid 0
                              0m 09.07s: sent host cert chal
                              0m 09.07s: got drive cert chal
                              0m 09.07s: BEC 0
                              0m 09.07s: DRIVE_VENDOR 0x0128
                              0m 09.15s: got drive key
                              0m 09.15s: got host key signature
                              0m 09.15s: verified drive signature
                              0m 09.15s: verified host signature
                              0m 09.23s: sent host signature and key point
                              0m 09.23s: got bus key
                              0m 11.41s: got volume id
                              0m 11.41s: got volume id mac
                              0m 11.41s: volume id is correct
                              0m 11.41s: got vid
                              0m 11.59s: blu-ray EC1F22AEA41884103A11F3C1E386EF62C4CEE207
                              0m 11.87s: cert BEE=0x00
                              0m 12.46s: D A63D5275
                              0m 12.46s: got vuk
                              0m 12.66s: got unit key 1
                              0m 16.92s: got extended bdinfo
                              0m 16.92s: opened blu-ray
                              2m 06.29s:


                              ------ begin mobile work(1/1) ------


                              2m 06.29s: create config(5)
                              2m 06.29s: info: convert profile(DVD_VOB)
                              2m 06.31s: info: bluray playlist(0),angle(0),chapter(1->31),3D(0)
                              2m 06.31s: info: streams((4113.2)(4354.2))
                              2m 06.31s: info: set output video frame_rate(24000/1001)
                              2m 06.31s: info: create stream(1-0), unit_size(327680), unit_count(100), memory_size(31.25)MB
                              2m 06.31s: info: enable multi-thread software decoder
                              2m 06.33s: info: create stream(1-0), unit_size(3110400), unit_count(45), memory_size(133.484)MB
                              2m 06.33s: info: create stream(1-0), unit_size(518400), unit_count(210), memory_size(103.824)MB
                              2m 06.33s: info: create stream(1-0), unit_size(93843), unit_count(100), memory_size(10)MB
                              2m 06.33s: info: create stream(2-1), unit_size(10485760), unit_count(1), memory_size(10)MB
                              2m 06.33s: info: create stream(2-1), unit_size(192000), unit_count(100), memory_size(18.3125)MB
                              2m 06.34s: info: processing source(00000.m2ts)
                              60m 37.00s:


                              ------ finish mobile work ------


                              64m 12.78s: detected blu-ray
                              64m 12.80s: drive F
                              64m 12.80s: blu-ray type 1
                              64m 12.80s: volume label
                              65m 47.90s: detected dvd
                              65m 47.90s: drive F
                              65m 47.90s: dvd type 1
                              65m 47.90s: volume label
                              66m 20.06s: detected blu-ray
                              66m 20.06s: drive F
                              66m 20.06s: blu-ray type 1
                              66m 20.06s: volume label

                              Comment

                              Working...
                              X