Transformers Dark of the moon

[bigbwb]

Yes please post the results! I don't compress and now I have a media hub and use another program to convert to an MKV. The MKV program only does unto protection 25, and 26 is the new movies so I still have to use Fab, transformers played just fine beginning to end!

I tried it again, same errors as before. It seems as if I am stuck until they do an update.

[Guest]

Cant' Compress Transformers 3

I copied Main Movie to my desktop at BD50. Then i tried to compress that to BD25 so i could burn to my 25 GB blank disk. Well 4 times it always stops at 10.82% and goes no further. I messed with the codecs which was suggested. I checked the Disable all GPU codes, and all others are set to Software. I have the latest software installed 8.1.2.5.. ANy suggestions ??

[xray1977]

Not sure if this might help or not but i use 8.0.9.1 did main movie only 25gb to hd then mounted mini iso with dvd fab virtual drive. no problem watch beginning to end. usually the way i do them. hope any info might help

[Guest]

Ok i guess i figured it out.. This version v8.1.2.5 doesn't like my Anti-Virus software which is Bit Defender. I un-installed it and now the compression is going strong. Right now its at 40% and still running. I've had Bit Defender Ani-Virus for 6 months and never had a problem with other Blue Ray back-ups. Who woulda figured since i don't think i should have had that much problems with DVD Fab. Oh well i'll know next time i guess.

[SiNiSTER]

hmmm ok i remember ironman 2 had the same problems with compressing. so i tried what we used for ironman 2. i tried 7.0.9.0 version and went to the spot were it jitters seems to be ok, when i get off from work i'll watch the whole movie, but so far were there were jitters, not present now. but i see when i loaded up this version cuda was enabled maybe thats it i used lightning for the current version.. i'll post back...

[bigbwb]

I got it to compress by using an older version 8.0.7.03 (someone else used this one as well) and it worked! I used the latest 8125 for everything else.

[RonS]

I compressed it using 8.0.7.3 but couldnt get it to burn. This is crazy wasting hours with it. I have backed up 32 movies and this is the first one I had this much trouble with

I'm done with it for awhile untill there is an update

DVDFab 8.0.7.3 (2011/10/06 21:34:14)

0m 01.77s: option dvd2dvd 0 dvd2mobile 0 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 0 filemover 0
0m 35.70s: detected blu-ray
0m 35.70s: drive F
0m 35.70s: blu-ray type 0
0m 35.70s: volume label
0m 56.47s: got bdmv
0m 56.75s: got extended bdinfo
2m 45.34s: Blu-ray Copy: Main Movie
2m 45.34s: Source: C:\Users\Sowadski\Documents\DVDFab\FullDisc\TRANSF ORMERS_3_AC_73full\BDMV\
2m 45.34s: Playlist: 800
2m 45.34s: Chapters: 1 -> 23
2m 45.34s: SourceSize: 19797 MB
2m 45.34s: RemoveHDAudio: 0
2m 45.34s: ProtectedDisc: 0
2m 45.34s: OutputTarget: BD25
2m 45.34s: OutputVideo: 1080p/i
2m 45.37s: compress begin: Blu-ray groups clips(00800.m2ts), playtime(9263295 ms), size(29357 MB)
2m 45.42s: processing source(00800.m2ts)


DVDFab 8.0.7.3 (2011/10/07 19:04:24)

0m 02.35s: option dvd2dvd 0 dvd2mobile 0 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 0 filemover 0
0m 35.03s: detected blu-ray
0m 35.03s: drive F
0m 35.03s: blu-ray type 0
0m 35.03s: volume label
19m 09.60s: got bdmv
19m 09.74s: got extended bdinfo
22m 01.96s: got bdmv
22m 02.49s: got extended bdinfo
22m 49.42s: Blu-ray Copy: Main Movie
22m 49.42s: Source: C:\Users\Sowadski\Documents\DVDFab\FullDisc\TRANSF ORMERS_3_AC_73full\BDMV\
22m 49.42s: Playlist: 800
22m 49.42s: Chapters: 1 -> 23
22m 49.42s: SourceSize: 19680 MB
22m 49.42s: RemoveHDAudio: 0
22m 49.42s: ProtectedDisc: 0
22m 49.42s: OutputTarget: BD25
22m 49.42s: OutputVideo: 1080p/i
22m 49.45s: compress begin: Blu-ray groups clips(00800.m2ts), playtime(9263295 ms), size(29357 MB)
22m 49.47s: processing source(00800.m2ts)


DVDFab 8.0.7.3 (2011/10/07 19:42:08)

0m 04.25s: option dvd2dvd 0 dvd2mobile 0 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 0 filemover 0
0m 21.96s: detected blu-ray
0m 21.96s: drive F
0m 21.96s: blu-ray type 0
0m 21.96s: volume label
0m 43.85s: got bdmv
0m 43.91s: got extended bdinfo
1m 12.40s: Blu-ray Copy: Main Movie
1m 12.40s: Source: C:\Users\Sowadski\Documents\DVDFab\MainMovie\TRANS FORMERS_3_AC_73full\BDMV\
1m 12.40s: Playlist: 0
1m 12.40s: Chapters: 1 -> 23
1m 12.40s: SourceSize: 19688 MB
1m 12.40s: RemoveHDAudio: 0
1m 12.40s: ProtectedDisc: 0
1m 12.40s: OutputTarget: BD25
1m 12.40s: OutputVideo: 1080p/i


DVDFab 8.1.2.5 (2011/10/07 19:57:24)

0m 01.17s: Qt Translator file load success


DVDFab 8.1.2.5 (2011/10/07 19:57:28)

0m 00.84s: Qt Translator file load success
0m 01.09s: option dvd2dvd 0 dvd2mobile 0 bluray2bluray 1 bd2mobile 0 bd23d 1 bd2dvd 0 file2mobile 0 filemover 0
0m 08.26s: detected blu-ray
0m 08.26s: drive F
0m 08.26s: blu-ray type 1
0m 08.28s: volume label
0m 17.08s: got bdmv
0m 17.14s: got extended bdinfo

[studmonkey76]

i found 8.1.2.3 beta online and used it, and it worked fine on the transformers dark of the moon with no issues

[SiNiSTER]

well watched the movie hmm still have glicthes at were the transformers are forced to leave the earth, ill try 8.1.2.3 beta last time already 4 coasters but have to find it

[Guest]

Well after i un-installed my anti-virus i was able to do all using the latest software version v8.1.2.5. Took 1hr:45m to compress and then burn using IMG. IF you don't have latest version of IMG Burn i would recommend that also. Other than that Good Luck...

[djnred76]

Transformers: Dark of the Moon

I successfully backed up Transformers Blu-ray using latest version v8.1.2.5 and it took about 30 hours to rip. Recognized disc as Transformers_3_AC and it burned with no issues. Dont understand why it took this long to rip but it did rip properly considering I have a six core Phenom that was showing constant usage on all six cores while the ripping process was running.

[Guest]

Well i have a Dell Studio XPS with a 6 core Phenom and it took me probably 2 and half hours to copy and burn. The only major problem i had was compression. I had to un install my anti virus and then it worked. I wouldn't even do a copy if it took 3 hours let alone what you had to do. Sounds like a major setting problem to me.

[RonS]

Well i have a Dell Studio XPS with a 6 core Phenom and it took me probably 2 and half hours to copy and burn. The only major problem i had was compression. I had to un install my anti virus and then it worked. I wouldn't even do a copy if it took 3 hours let alone what you had to do. Sounds like a major setting problem to me.

Mine burnt just has some glitches. If I just back up the whole movie on a DL disk will there still be glitches?

[Guest]

Well when make a back up copy of a movie sometimes it takes out a few things. That is the copyright stuff they have in there. My copy probably lost 10-15 seconds of one scene. Try a DL copy, but u still might get a glitch here and there... Also that was alot of compression for that movie....

[SiNiSTER]

yea still no luck with transformers 3 and fast five just get clitches, and i read some were to download image burn why use image burn when we paid for this to work... just my 2 cents.. just have to wait for an update....