Correct title for Twilight Breaking Dawn Movie only

[Bynal]

As everything is just appended, your old log will be fine. It is needed for disc identification. You can attach it here, no need to paste.
Also, jar files will be of great help for developers. Thanks

Hope this helps.

DVDFab 8.1.6.3 (2012/02/16  18:21:04)

 0m 02.09s: Qt Translator file load success 
 0m 02.31s: Load config successful.
 0m 02.34s: Init profile data driver sucessful.
 0m 07.35s: Init GPU settings sucessful.
 0m 07.35s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
 0m 07.37s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
 0m 07.65s: Config ExBar successful.
 0m 07.65s: dvd2dvd have 8 elements.
 0m 07.78s: dvd2mobile have 28 elements.
 0m 08.43s: blu-ray2blu-ray have 4 elements.
 0m 08.46s: blu-ray2mobile have 17 elements.
 0m 08.85s: blu-ray23d have 7 elements.
 0m 08.98s: blu-ray2dvd have 1 elements.
 0m 09.01s: file2mobile have 27 elements.
 0m 09.65s: file2dvd have 1 elements.
 0m 09.67s: file2bluray have 1 elements.
 0m 09.98s: Config work ui controls successful.
 0m 13.64s: Init burn engine successful.
 0m 13.70s: StartNotify successful.
 0m 14.90s: detected blu-ray
 0m 14.92s: drive H
 0m 14.92s: blu-ray type 1
 0m 14.92s: volume label BREAKING_DAWN
 0m 14.95s: aacs 1 bd+ 0
 0m 16.42s: got discinfo
 0m 16.54s: got bdmv
 0m 16.54s: Vendor: ATAPI
 0m 16.54s: Product: iHBS112   2
 0m 16.54s: Revision: PL02
 0m 16.54s: Vendor specific: 2011/11/11 16:53
 0m 16.54s: AACS version: 1
 0m 16.54s: Number of concurrent AGIDs: 2
 0m 16.54s: Supports bus encryption: YES
 0m 16.54s: Supports binding nonce generation: NO
 0m 16.54s: Supports Hybrid discs: NO
 0m 16.54s: got agid 0
 0m 16.60s: sent host cert chal
 0m 16.60s: got drive cert chal
 0m 16.62s: BEC 1
 0m 16.62s: DRIVE_VENDOR 0x0080
 0m 16.68s: got drive key
 0m 17.75s: got host key signature
 0m 17.75s: verified drive signature
 0m 17.75s: verified host signature
 0m 17.82s: sent host signature and key point
 0m 17.82s: got bus key
 0m 17.82s: got agid 0
 0m 17.89s: sent host cert chal
 0m 17.90s: got drive cert chal
 0m 17.90s: BEC 1
 0m 17.90s: DRIVE_VENDOR 0x0080
 0m 17.96s: got drive key
 0m 17.98s: got host key signature
 0m 17.98s: verified drive signature
 0m 17.98s: verified host signature
 0m 18.04s: sent host signature and key point
 0m 18.06s: got bus key
 0m 19.20s: got volume id
 0m 19.20s: got volume id mac
 0m 19.20s: volume id is correct
 0m 19.20s: got vid
 0m 19.39s: blu-ray 7F80E3FFBDC45B59B7BF017805838BF894E23EC3
 0m 19.71s: cert BEE=0x00 
 0m 20.21s: D B9F2153C
 0m 20.21s: got vuk
 0m 20.21s: got agid 0
 0m 20.28s: sent host cert chal
 0m 20.28s: got drive cert chal
 0m 20.28s: BEC 1
 0m 20.28s: DRIVE_VENDOR 0x0080
 0m 20.35s: got drive key
 0m 20.35s: got host key signature
 0m 20.35s: verified drive signature
 0m 20.35s: verified host signature
 0m 20.43s: sent host signature and key point
 0m 20.43s: got bus key
 0m 20.43s: got data key
 0m 20.51s: got unit key 4
 0m 30.60s: got extended bdinfo
 0m 30.60s: opened blu-ray

[CBR929]

Thank you Bynal
I'm sure this will help the developers.
CBR929

[skeelo58]

I tried to Clone this last night. It burned successfully. However, all I got was the black screen on the PS3. I hate making coasters, I'm really gonna need to invest in a BD-RE. Anyways, I then did Movie only on file 504 like someone said earlier in this thread, and it worked perfectly. I could care less about the extras anyways.

[dlrtyblrdz]

Skeelo - did it stop at 25:44? My backup stops at 25:44 and says 'Copy detected (or a rip tool is running if you are trying to watch this movie on your pc' Please visit http://summit.continuemovie.com for more information

[skeelo58]

Skeelo - did it stop at 25:44? My backup stops at 25:44 and says 'Copy detected (or a rip tool is running if you are trying to watch this movie on your pc' Please visit http://summit.continuemovie.com for more information

For the clone or movie only?

For the Clone, I don't know, because my burn didn't work. I mean, it burned 100%, but all I got was a black screen when I played it in my PS3. The movie wouldn't even start.

I didn't try full disc, because I figure that since the clone didn't work, full disc wouldn't work either.

For Movie only, I do NOT get the copy protection message at that time mark. It looks like the total run time of the movie is 1:57:08. This was done by choosing movie file 504. Do NOT just click movie only, and then go straight into the burn. It will default to the longest file, which happens to be exactly 10 minutes longer than the movie run (guess what the extra 10 minutes is?). You guessed it, that's the copy protection notice. 10 minutes worth of that crap.

So yeah, just scroll down the list, choose file 504, and let her buck.

[Juggs]

title 504

I've made so many coasters on this one... it angers me to count! About title 504 - it has the correct time for the whole movie and it doesn't have the black screen warning but..... at 25 mins in the movie it's out of order. Not really a big deal at that point of the movie and the 2 scenes that were flip-flopped only lasted a few seconds. But for those of you that wants a perfect "in order" copy...504 isn't it. Has anyone else confirmed a good title? It is waaaay too many for me to do this trial and error thing.

-- Juggs

[69RoadRunnerFan]

As everything is just appended, your old log will be fine. It is needed for disc identification. You can attach it here, no need to paste.
Also, jar files will be of great help for developers. Thanks

j&b, Not sure if all of the info the developers are looking for is contained here in this log. When I read about the updated version of 8.1.6.3 I uninstalled the 1st version and deleted the logs prior to installing the updated 8.1.6.3. Since then I have re-burned a movie only copy to a BD-RE from Title/playlist 924 that seems to be correct. (The 504 Titleset previously mentioned in this thread is not correct - scenes out of sequence or missing during the 25:44 timeline). I have not watched the entire movie through, but it does appear to get past the previous discrepencies around the 25:44 timeline correctly (Log File attached, what is the best way to get the JAR files to the developers? .zip error'd out. Too large maybe 6.1mb. Individual .jar upload attempts comes back invalid file type). When looking through the log, the backup on 2/15 was from my purchased disc (Single disc -Special Edition w/7.1 surround) that backed up and played fine using the 2nd gen of 8.1.6.3. The backup on 2/16 is from the ripped files on my media server that were from (what looked like an original) a disk that my son's girlfriend brought over for them to watch before mine made it home. I don't have that exact disk available since she took it back up to school with her. I noticed the log from the 2/16 ripped files (created with AnyDVD HD) don't have the 40 char hex blu-ray number. I think this is the disk identification you are referring to. I will see if she can bring that disk back next time she comes down from college. I have been doing some video work/editing/authoring (mostly kids sporting events) recently and I am trying to understand how DVD's and Blu-Ray's are put together. Looks like this protection stuff is a different beast though.

I hope my ramblings here make some sort of sense and help out some. Let me know if and how the JAR files will still be helpful and I will upload.

[j&b]

Hope this helps.

DVDFab 8.1.6.3 (2012/02/16  18:21:04)

...........................................................
 0m 19.20s: got vid
 0m 19.39s: blu-ray 7F80E3FFBDC45B59B7BF017805838BF894E23EC3
 0m 19.71s: cert BEE=0x00 
...........................................................

It definitely does. Thank you very much for support.

For everyone else: if in your log of Twilight Saga: Breaking Dawn Part 1 (disc is called BREAKING_DAWN), you have a line like the one above, "... blu-ray NUMBER" with a different NUMBER than the one above, please also post your log + jar files (preferably from BDMV\BACKUP\JAR\*.jar). Thank you.

Indeed the good playlist is 504, for this version; btw: the "copy protected" message is clip 516, so any playlist with that clip in is not good. The server has been updated and DVDFab will select it in Main Movie view.

Other versions, with English DTSHD 7.1 channels, have only one playlist of 1:57:08, playlist 1.

[dlrtyblrdz]

I used the 504 file like someone else said, and it seemed to work, I am not sure if its in order though like Juggs said. I will let my wife try it out. If this version doesnt work, im done, 4 coasters is enough for me!

[j&b]

I used the 504 file like someone else said, and it seemed to work, I am not sure if its in order though like Juggs said. I will let my wife try it out. If this version doesnt work, im done, 4 coasters is enough for me!

Main Movie with the playlist indicated above is ok.
You'll have to wait for full disc to be officially supported for all versions.

[dlrtyblrdz]

I am having the same problem juggs is having. I'd be happy to post the files to show you. What do you need from me? This is the first time doing it, sorry for asking.

The movie flips scenes at 25 mins in, it lasts like 10-15 seconds. I used title set 504. Below is the log from the full disc iso i made.

904 seems to work, but I am not about to waste another disk!

DVDFab 8.1.6.3 (2012/02/17 18:39:31)

0m 15.24s: Qt Translator file load success
0m 18.77s: Load config successful.
0m 21.28s: Init profile data driver sucessful.
0m 29.45s: Init GPU settings sucessful.
0m 29.45s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 29.46s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 29.75s: Config ExBar successful.
0m 29.75s: dvd2dvd have 8 elements.
0m 29.88s: dvd2mobile have 28 elements.
0m 30.49s: blu-ray2blu-ray have 4 elements.
0m 30.52s: blu-ray2mobile have 17 elements.
0m 30.88s: blu-ray23d have 7 elements.
0m 31.02s: blu-ray2dvd have 1 elements.
0m 31.03s: file2mobile have 27 elements.
0m 31.64s: file2dvd have 1 elements.
0m 31.66s: file2bluray have 1 elements.
0m 31.96s: Config work ui controls successful.
0m 50.68s: Init burn engine successful.
0m 50.71s: StartNotify successful.
0m 10.94s: detected blu-ray
0m 10.94s: iso D:/dvd/BREAKING_DAWN.iso
0m 10.94s: blu-ray type 1
0m 10.94s: volume label BREAKING_DAWN
0m 10.97s: aacs 0 bd+ 0
0m 11.80s: got discinfo
0m 11.82s: got bdmv
0m 13.00s: got extended bdinfo
0m 13.00s: opened blu-ray

[dlrtyblrdz]

jar files attached

[CBR929]

Thanks dlrtyblrdz
This will help the developers
CBR929

[skeelo58]

I haven't watched the burned copy of this movie yet, so I wouldn't know about the flipped scenes. I only fast forwarded through to the 25 minute mark to make sure there was no copyright protection notice on there.

About the flipped scenes, were they important scenes? No spoilers wanted obviously...

[Juggs]

I haven't watched the burned copy of this movie yet, so I wouldn't know about the flipped scenes. I only fast forwarded through to the 25 minute mark to make sure there was no copyright protection notice on there.

About the flipped scenes, were they important scenes? No spoilers wanted obviously...

No.. not important scenes and if you watch it from the beginning, you'll notice that something is out of place. This thing is killing me...I don't even like the movie but I need to figure this out..