Main Movie backup

[Lukesparksoff]

How long should a main movie backup take ,full movie takes me about 45min-1hr. I'm copying angels & Demons ,it's 2.5hrs and accounting.

[AGJ]

not that long so with that said it seems your computer might have reverted to PIO mode and you need to reset it to DMA using the setting within DVDFab

[Lukesparksoff]

I reset DMA now copying Angels & Demons, picked main movie clicked start 2 now I'm 2.5 hrs in and counting. What am I doing wrong?

[AGJ]

good question why don't you read over the Help Us Help You sticky and post the information needed from that in this thread and then maybe someone can help you better

[W&B]

How to Check DMA status

How to Check DMA status of your Optical Drive
1. Right Click on 'Computer'and Select 'Properties' and then 'Device Manager'

2. Click on 'IDE ATA/ATAPI controllers'. Right Click on each named 'channel'

3. Click the 'Advanced Settings' tab, Click on each Target id and make sure 'Enable DMA'
is Selected.*

*Some 'channels' may be empty. Not all will have the option for DMA mode 5. Some may be 4 or less. Generally Optical drives will be DMA mode 4 and HDD will be DMA mode 5.

*There's settings in the Bios also but I make no mention of it since there is so many different one's. I will not advise anyone on making changes to the Bios!*

[Lukesparksoff]

no error codes or crashes
started a source (oo505m2ts)
now it's on source(00520m2ts)

Depending on the nature of the problem, it can help to know:
If this happens with all discs or just one

1 all disc for main movie

Your operating system/CPU/memory configuration

2 AMD 9600 Q4
3870 GPU
3gb Ram
32bit Vista

If you are using external hard drives or optical drives

3 No

If you have made any recent changes to your OS or system hardware

4 None

If you have other DVD or BD software installed, particularly if recently added

5 totalmedia theatre3
DVDFab is the last software installed

[Lukesparksoff]

How to Check DMA status of your Optical Drive
1. Right Click on 'Computer'and Select 'Properties' and then 'Device Manager'

2. Click on 'IDE ATA/ATAPI controllers'. Right Click on each named 'channel'

3. Click the 'Advanced Settings' tab, Click on each Target id and make sure 'Enable DMA'
is Selected.*

*Some 'channels' may be empty. Not all will have the option for DMA mode 5. Some may be 4 or less. Generally Optical drives will be DMA mode 4 and HDD will be DMA mode 5.

*There's settings in the Bios also but I make no mention of it since there is so many different one's. I will not advise anyone on making changes to the Bios!*

the two channel that had options was enabled
I have a sata drive.I thought sata drives was auto enabled in Vista

[W&B]

the two channel that had options was enabled
I have a sata drive.I thought sata drives was auto enabled in Vista

They should be, just something to check.

[rogo43]

Yea i noticed my angels and demons is going on 5 hours and i dont even have the option to change the DMA.. so im not sure.