No matter what BR I copy, they stop at 11.64% read and sit for hours

bobmitch

I have three blue ray drives and they all do the same exact thing. Pioneer BDR-2208, BDR-207 both SATA and my Samsung SE-506AB. No matter what disc I am reading...no matter what drive reads it...they just stop. I took a couple of screen shots. Once the read speed drops to 0, the program no longer shows it....just the % read. It will sit there for an hour if I let it. Can't seem to read anything that requires decrypting or shrinking. Turned off CUDA and same result. New Nvidia drivers 310.61/64. No joy and no success with version 8.2.2.2 either....

What can it be????

Windows 8

90312

bobmitch, post an internal log that might tell the story.

bobmitch

That's the odd part...when I go into Users\Username\My Documents\DVDFab\Log...

There is NOTHING in there. No log, nothing....I don't get any of this. It starts to read the disc normally and then stops at 11.64%. Read speed drops to 0 and nothing else happens. No log, no errors, nothing

BTW...I am running Intel Rapid Storage drivers 11.6 (the latest). My OS drive is a Samsung 830 SSD, and my D drive is a 1 TB 7200 rpm Hitachi. In the program setup, I created temp directories on the D drive for DVDFab to cache it's files...but still should have no bearing. The program worked for years on Windows 7...but somehow...not on 8.

bobmitch

OK...I started a copy straight to my hard drive and it still locks at 11.61%. I can never rip (when having to shrink down the size)...Cars, for example is 27GB and has to shrink down to 22GB to fit a BD25. It works normally until 11.61%, then the read speed drops to 0 and the program just sits there. I have to cancel and finish...nothing ever gets done...whether 9.0.1.1 or 8.2.2.2, same for both. There is obviously something going on. Read the log that it created and see nothing...maybe you can...DVDFab is totally unusable on my system with Windows 8...

shanecnz

Can you clone a disk to a folder or an ISO without problem?

Looking at your log file shows me it is still trying to use your GPU for encoding.

[code]
7m 17.36s: Blu-ray Copy: Main Movie
7m 17.36s: Source: E:/BDMV/
7m 17.36s: Playlist: 52
7m 17.36s: Chapters: 1 -> 32
7m 17.36s: TotalSize: 27861 MB
7m 17.36s: SourceSize: 27861 MB
7m 17.36s: RemoveHDAudio: 0
7m 17.36s: CompressToAC3: 0
7m 17.36s: OutputSize: 23000 MB
7m 17.36s: OutputDisc: BDMV
7m 17.36s: OutputTarget: BD25
7m 17.36s: OutputVideo: 1080p/i
7m 17.36s: info: enable bd copy(mode=0)
7m 17.36s: info: video encode mode(0), bitrate(17314), lr-encode(no)
7m 17.36s: info: streams(4113.2)
7m 17.36s: info: blu-ray copy begin (unit[elem[atomic[00060.m2ts]]])
7m 17.36s: try to use gpu acceleration(1) for video decoding
7m 17.36s: CUDA GPU acceleration for video decoding enabled
7m 18.39s: GPU acceleration for video encoding enabled
7m 18.39s: info: h264_encode: encode param profile(2) level(41) bitrate(17314)
7m 21.41s: info: processing source(00060.m2ts)[/code]

Not sure how you disabled it (nvidia drivers or within DVDFAB or both?) but try again and open the log file as soon as it is started to make sure its not using GPU and is software only transcoding. Also make sure you have plenty of disk space where you have set DVDFAB to use as temp.

bobmitch

The problem I have is that I can't get DVDFab to read any disc past 11.61%. I will disable GPU and go with straight software, which I have tried with no success. Let me see if it will generate a new log...

OK...this is what I get when I disable CUDA and keep everything strictly software. I did an upgrade to Windows 8, and everything works fine...except DVDFab and Nero Discspeed, which now only recognizes one of my drive, not both Pioneers...odd stuff...

I have filled out about 5-6 of these error reports and sent. Even emailed tech support...no joy!

bobmitch

Not that it has anything to do with Blu Ray Copy, but I was able to copy a DVD, successfully. Must be something to do with 9.0.1.1 and it's BR ability. Odd thing...8.2.1.8 functioned normally on Windows 8 until I installed v9. Did 9 break 8?

SuperFist

Please don't wait for hours at the same percentage. If the number doesn't advance at all after 10-15 minutes, there's a problem.

bobmitch

OK, so I let it go for just over an hour...had other things to do and forgot it was still going. When I came back....was still stuck in the same place. The ability to do a DVD tells me that maybe there is an issue with the Blu Ray copy part. The first time I used it, I was able to get the read part to 100% and nothing happened after that. Then, since, I can't get past 11.61%. Something very problematic here. As I stated earlier...I was using 8.2.1.8 fine, even in Windows 8, until I installed 9. Now both don't work right...for BD

90312

This is starting to sound like a pooched install to me. Try uninstalling both versions and running ccleaner on the registry until it doesn't find any errors. It took four times on my W8 machine.

bobmitch

[QUOTE=90312;128106]This is starting to sound like a pooched install to me. Try uninstalling both versions and running ccleaner on the registry until it doesn't find any errors. It took four times on my W8 machine.[/QUOTE]

Thought you might be on to something. Uninstalled both and ran ccleaner. Then I cleaned out my registry of everything DVDFab. Reinstalled only 9.0.1.1 and tried to copy Cars again. Read speed was actually up to close to 12mb/s which was a big improvement...things moved along and stalled at 11.77% and then just sat there. Cancelled and going back to the drawing board...

Here is my last log:

DVDFab 9.0.1.1 (2012/11/28 20:40:30)

0m 00.15s: GPUAccelerate: 12351
0m 00.15s: CUDA cap: 1
0m 00.15s: Support coreavc decode: 0
0m 00.15s: Graphics info: NVIDIA GeForce GTX 580 : 5.0 : 2.0
0m 00.15s: Qt Translator file load success
0m 00.17s: Start get sys number.
0m 00.17s: Serial number is: c8-60-00-c9-6a-5c
0m 00.17s: Reg URL link is:
0m 00.17s: Version is: 9011
0m 00.17s: Product is: 2
0m 00.17s: Connect type is: 0
0m 00.87s: Times of connecting error is: 0
0m 00.87s: Parse string is: 2:1419226165
0m 00.87s: Parse string is: 20:1419226165
0m 00.87s: Parse string is: 60:1419213865
0m 00.87s: Parse string is: OV:9011
0m 00.87s: Parse string is: BV:9008
0m 00.87s: Parse string is: S:ea93883ebf603c2dd3c8598671a9a580
0m 01.17s: End check info.
0m 01.17s: Load config successful.
0m 01.23s: Init profile data driver sucessful.
0m 01.28s: Init GPU settings sucessful.
0m 01.28s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 01.29s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 04.48s: Init burn engine successful.
0m 04.54s: opening drive E
0m 04.55s: opened i/o
0m 04.56s: got media type 15
0m 05.06s: got disc type 0
0m 05.06s: got max lba 20206815
0m 06.35s: type Blu-ray BDMV
0m 06.35s: volume label 18020466_CARS_USA
0m 06.42s: opening drive F
0m 06.49s: opened i/o
0m 06.49s: got media type 16
0m 06.50s: got disc type 0
0m 06.50s: got max lba 0
0m 07.57s: aacs 1 bd+ 0
0m 10.21s: Java protection is removed by StealthyClone anti-protection.
0m 10.27s: got discinfo
0m 10.57s: got bdmv
0m 10.59s: Vendor: PIONEER
0m 10.59s: Product: BD-RW BDR-207D
0m 10.59s: Revision: 1.30
0m 10.59s: Vendor specific: 12/09/05 PIONEER
0m 10.59s: AACS version: 1
0m 10.59s: Number of concurrent AGIDs: 1
0m 10.59s: Supports bus encryption: YES
0m 10.60s: Supports binding nonce generation: YES
0m 10.60s: Supports Hybrid discs: NO
0m 10.61s: got agid 0
0m 10.69s: sent host cert chal
0m 10.70s: got drive cert chal
0m 10.70s: BEC 1
0m 10.70s: DRIVE_VENDOR 0x0067
0m 10.75s: got drive key
0m 10.75s: got host key signature
0m 10.75s: verified drive signature
0m 10.76s: verified host signature
0m 10.81s: sent host signature and key point
0m 10.81s: got bus key
0m 10.84s: got agid 0
0m 10.91s: sent host cert chal
0m 10.92s: got drive cert chal
0m 10.93s: BEC 1
0m 10.93s: DRIVE_VENDOR 0x0067
0m 10.97s: got drive key
0m 10.98s: got host key signature
0m 10.98s: verified drive signature
0m 10.98s: verified host signature
0m 11.03s: sent host signature and key point
0m 11.04s: got bus key
0m 11.04s: got volume id
0m 11.04s: got volume id mac
0m 11.04s: volume id is correct
0m 11.04s: got vid
0m 11.23s: blu-ray 59996671AB3F7FD95D39A48B04D4CE52B13F2073
0m 11.77s: cert BEE=0x00 same
0m 13.18s: D 68108922
0m 13.19s: got vuk
0m 13.21s: got agid 0
0m 13.28s: sent host cert chal
0m 13.30s: got drive cert chal
0m 13.30s: BEC 1
0m 13.30s: DRIVE_VENDOR 0x0067
0m 13.35s: got drive key
0m 13.35s: got host key signature
0m 13.36s: verified drive signature
0m 13.36s: verified host signature
0m 13.42s: sent host signature and key point
0m 13.42s: got bus key
0m 13.43s: got data key
0m 13.71s: got unit key 1
0m 41.47s: got extended bdinfo
0m 41.47s: opened blu-ray
0m 41.49s: opening drive F
0m 41.56s: opened i/o
0m 41.56s: got disc type 0
0m 41.57s: got max lba 0
1m 14.24s: Burn data size is: 23000
1m 14.24s: Burn disc space is: 23866
3m 06.14s: Blu-ray Copy: Main Movie
3m 06.14s: Source: E:/BDMV/
3m 06.14s: Playlist: 52
3m 06.14s: Chapters: 1 -> 32
3m 06.14s: TotalSize: 27861 MB
3m 06.14s: SourceSize: 27861 MB
3m 06.14s: RemoveHDAudio: 0
3m 06.14s: CompressToAC3: 0
3m 06.14s: OutputSize: 23000 MB
3m 06.14s: OutputDisc: BDMV
3m 06.15s: OutputTarget: BD25
3m 06.15s: OutputVideo: 1080p/i
3m 06.15s: info: enable bd copy(mode=0)
3m 06.15s: info: video encode mode(0), bitrate(17314), lr-encode(no)
3m 06.15s: info: streams(4113.2)
3m 06.15s: info: blu-ray copy begin (unit[elem[atomic[00060.m2ts]]])
3m 06.15s: try to use gpu acceleration(1) for video decoding
3m 06.15s: CUDA GPU acceleration for video decoding enabled
3m 07.17s: GPU acceleration for video encoding enabled
3m 07.17s: info: h264_encode: encode param profile(2) level(41) bitrate(17314)
3m 10.19s: info: processing source(00060.m2ts)

CBR929

Hi bobmitch
Try it now with Cuda disabled.
Have you also tried cleaning the disc?

CBR929

shanecnz

Can you do a BD Clone to folder or ISO Yes/No?

Could you ever do a BD Clone with this or any other version of DVD Fab Yes/No?

You need to work out if this is a DVDFAB issue or a hardware issue with your drive, so far you posted lots of stuff without answering some critical questions that will help us help you...

bobmitch

[QUOTE=shanecnz;128128]Can you do a BD Clone to folder or ISO Yes/No?

Could you ever do a BD Clone with this or any other version of DVD Fab Yes/No?

You need to work out if this is a DVDFAB issue or a hardware issue with your drive, so far you posted lots of stuff without answering some critical questions that will help us help you...[/QUOTE]

No, I can't clone to a folder or .iso. The problem is when it is reading and converting, it stops at 11+% and reading ceases...the program just stalls. I have a five month old Pioneer BDR-207 and a one month old Pioneeer BDR-2208. Everything was fine with Windows 7 and 8.2.1.8 and even when I upgraded to Win 8. Once I had both versions installed, neither one worked properly. What questions

bobmitch

[QUOTE=CBR929;128126]Hi bobmitch
Try it now with Cuda disabled.
Have you also tried cleaning the disc?

CBR929[/QUOTE]

When I disable CUDA, the program crashes on startup...

bobmitch

This is the crash log when I disable CUDA

DVDFab 9.0.1.1 (2012/11/28 22:08:51)

0m 00.15s: GPUAccelerate: 12351
0m 00.15s: CUDA cap: 1
0m 00.17s: Support coreavc decode: 0
0m 00.17s: Graphics info: NVIDIA GeForce GTX 580 : 5.0 : 2.0
0m 00.17s: Qt Translator file load success
0m 00.19s: Start get sys number.
0m 00.19s: Serial number is: c8-60-00-c9-6a-5c
0m 00.19s: Reg URL link is:
0m 00.19s: Version is: 9011
0m 00.19s: Product is: 2
0m 00.19s: Connect type is: 0
0m 00.84s: Times of connecting error is: 0
0m 00.84s: Parse string is: 2:1419226165
0m 00.84s: Parse string is: 20:1419226165
0m 00.84s: Parse string is: 60:1419213865
0m 00.84s: Parse string is: OV:9011
0m 00.84s: Parse string is: BV:9008
0m 00.84s: Parse string is: S:bbd2addd08217d79fb6521f60fe4c51c
0m 01.19s: End check info.
0m 01.19s: Load config successful.
0m 01.26s: Init profile data driver sucessful.
0m 01.30s: Init GPU settings sucessful.
0m 01.30s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 01.30s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 04.49s: Init burn engine successful.
0m 04.55s: opening drive E
0m 04.55s: opened i/o
0m 04.57s: got media type 15
0m 05.16s: got disc type 0
0m 05.16s: got max lba 20206815
0m 06.39s: type Blu-ray BDMV
0m 06.39s: volume label 18020466_CARS_USA
0m 06.45s: opening drive F
0m 06.52s: opened i/o
0m 06.53s: got media type 16
0m 06.53s: got disc type 0
0m 06.53s: got max lba 0
0m 07.54s: aacs 1 bd+ 0
0m 08.21s: Java protection is removed by StealthyClone anti-protection.
0m 08.29s: got discinfo
0m 08.57s: got bdmv
0m 08.58s: Vendor: PIONEER
0m 08.58s: Product: BD-RW BDR-207D
0m 08.58s: Revision: 1.30
0m 08.58s: Vendor specific: 12/09/05 PIONEER
0m 08.58s: AACS version: 1
0m 08.58s: Number of concurrent AGIDs: 1
0m 08.58s: Supports bus encryption: YES
0m 08.58s: Supports binding nonce generation: YES
0m 08.58s: Supports Hybrid discs: NO
0m 08.62s: got agid 0
0m 08.68s: sent host cert chal
0m 08.69s: got drive cert chal
0m 08.69s: BEC 1
0m 08.69s: DRIVE_VENDOR 0x0067
0m 08.74s: got drive key
0m 08.76s: got host key signature
0m 08.76s: verified drive signature
0m 08.76s: verified host signature
0m 08.80s: sent host signature and key point
0m 08.80s: got bus key
0m 08.83s: got agid 0
0m 08.91s: sent host cert chal
0m 08.93s: got drive cert chal
0m 08.93s: BEC 1
0m 08.93s: DRIVE_VENDOR 0x0067
0m 08.97s: got drive key
0m 08.97s: got host key signature
0m 08.97s: verified drive signature
0m 08.97s: verified host signature
0m 09.02s: sent host signature and key point
0m 09.04s: got bus key
0m 09.04s: got volume id
0m 09.04s: got volume id mac
0m 09.04s: volume id is correct
0m 09.04s: got vid
0m 09.22s: blu-ray 59996671AB3F7FD95D39A48B04D4CE52B13F2073
0m 09.83s: cert BEE=0x00 same
0m 11.19s: D 68108922
0m 11.19s: got vuk
0m 11.21s: got agid 0
0m 11.29s: sent host cert chal
0m 11.30s: got drive cert chal
0m 11.30s: BEC 1
0m 11.30s: DRIVE_VENDOR 0x0067
0m 11.35s: got drive key
0m 11.37s: got host key signature
0m 11.37s: verified drive signature
0m 11.37s: verified host signature
0m 11.41s: sent host signature and key point
0m 11.41s: got bus key
0m 11.43s: got data key
0m 11.69s: got unit key 1
0m 37.40s: got extended bdinfo
0m 37.42s: opened blu-ray
0m 37.43s: opening drive F
0m 37.50s: opened i/o
0m 37.52s: got disc type 0
0m 37.52s: got max lba 0
0m 43.54s: opening drive E
0m 43.54s: opened i/o
0m 43.54s: got media type 15
0m 44.03s: got disc type 0
0m 44.03s: got max lba 20206815
0m 45.15s: type Blu-ray BDMV
0m 45.15s: volume label 18020466_CARS_USA
0m 45.17s: opening drive F
0m 45.23s: opened i/o
0m 45.23s: got media type 16
0m 45.23s: got disc type 0
0m 45.24s: got max lba 0
1m 23.30s: terminate process

If it helps...my system info:

Asus Sabertooth z77 Motherboard with i7 3770K
Windows 8 Pro 64 Bit
Intel AHCI drivers 11.6 (Rapid Storage Drivers without Rapid Storage Manager)
EVGA GTX580 with Nvidia Drivers 310.64
Samsung 830 256 GB SSD for OS Drive (DVD Fab installed here)
Hitachi 1 TB 7200 rpm HDD as Data drive
Creative X-Fi Titanium PCIe Soundcard

bobmitch

In the immortal words of Monty Python..."And now, for something completely different"

I am attempting something and it seems to be working. Put Cars in the 207 and am copying to the HDD. Only difference, is that I am copying Movie only in BD50 mode. It is ripping at around 32 mb/s and so far, I am at 65% (hightest yet). If this works, then I am going to try to shrink it down and burn to the 208 with Imgburn. That is where the conversion will be the heaviest. I will post back once the burn is started...up to 75% read to HDD now, CUDA is enabled! Can't disable without crashing...85% to HDD. 100% complete copy to HDD in 16:33. I will now attempt to shrink to BD25 and burn it

bobmitch

Opened the folder and let DVDFab 9 do the conversion to BD25 and burn. Conversion stopped 5:25 in at 11.71%. Conversion speed is spiraling downward toward 0 with no progress. Going to stop the conversion and post whatever log it has written. Looks as though the failure is NOT in the read of the disc, but the conversion. I have to use CUDA, because the program crashes if I do NOT use CUDA. Here is the log:

DVDFab 9.0.1.1 (2012/11/28 22:14:24)

0m 00.14s: GPUAccelerate: 12351
0m 00.15s: CUDA cap: 1
0m 00.15s: Support coreavc decode: 0
0m 00.15s: Graphics info: NVIDIA GeForce GTX 580 : 5.0 : 2.0
0m 00.15s: Qt Translator file load success
0m 00.17s: Start get sys number.
0m 00.17s: Serial number is: c8-60-00-c9-6a-5c
0m 00.17s: Reg URL link is:
0m 00.17s: Version is: 9011
0m 00.17s: Product is: 2
0m 00.17s: Connect type is: 0
0m 00.82s: Times of connecting error is: 0
0m 00.82s: Parse string is: 2:1419226165
0m 00.82s: Parse string is: 20:1419226165
0m 00.82s: Parse string is: 60:1419213865
0m 00.82s: Parse string is: OV:9011
0m 00.82s: Parse string is: BV:9008
0m 00.82s: Parse string is: S:eafcd597c6e7c216c50109e830d8588a
0m 01.17s: End check info.
0m 01.17s: Load config successful.
0m 01.23s: Init profile data driver sucessful.
0m 01.28s: Init GPU settings sucessful.
0m 01.28s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 01.28s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 04.46s: Init burn engine successful.
0m 04.53s: opening drive E
0m 04.53s: opened i/o
0m 04.54s: got media type 15
0m 05.02s: got disc type 0
0m 05.02s: got max lba 20206815
0m 06.28s: type Blu-ray BDMV
0m 06.28s: volume label 18020466_CARS_USA
0m 06.34s: opening drive F
0m 06.41s: opened i/o
0m 06.42s: got media type 16
0m 06.42s: got disc type 0
0m 06.42s: got max lba 0
0m 07.47s: aacs 1 bd+ 0
0m 08.14s: Java protection is removed by StealthyClone anti-protection.
0m 08.22s: got discinfo
0m 08.50s: got bdmv
0m 08.51s: Vendor: PIONEER
0m 08.51s: Product: BD-RW BDR-207D
0m 08.51s: Revision: 1.30
0m 08.51s: Vendor specific: 12/09/05 PIONEER
0m 08.51s: AACS version: 1
0m 08.51s: Number of concurrent AGIDs: 1
0m 08.51s: Supports bus encryption: YES
0m 08.51s: Supports binding nonce generation: YES
0m 08.51s: Supports Hybrid discs: NO
0m 08.55s: got agid 0
0m 08.61s: sent host cert chal
0m 08.62s: got drive cert chal
0m 08.62s: BEC 1
0m 08.62s: DRIVE_VENDOR 0x0067
0m 08.69s: got drive key
0m 08.69s: got host key signature
0m 08.69s: verified drive signature
0m 08.69s: verified host signature
0m 08.73s: sent host signature and key point
0m 08.73s: got bus key
0m 08.76s: got agid 0
0m 08.84s: sent host cert chal
0m 08.86s: got drive cert chal
0m 08.86s: BEC 1
0m 08.86s: DRIVE_VENDOR 0x0067
0m 08.91s: got drive key
0m 08.91s: got host key signature
0m 08.91s: verified drive signature
0m 08.91s: verified host signature
0m 08.97s: sent host signature and key point
0m 08.97s: got bus key
0m 08.97s: got volume id
0m 08.97s: got volume id mac
0m 08.97s: volume id is correct
0m 08.97s: got vid
0m 09.09s: blu-ray 59996671AB3F7FD95D39A48B04D4CE52B13F2073
0m 09.66s: cert BEE=0x00 same
0m 11.01s: D 68108922
0m 11.03s: got vuk
0m 11.05s: got agid 0
0m 11.12s: sent host cert chal
0m 11.14s: got drive cert chal
0m 11.14s: BEC 1
0m 11.14s: DRIVE_VENDOR 0x0067
0m 11.19s: got drive key
0m 11.19s: got host key signature
0m 11.20s: verified drive signature
0m 11.20s: verified host signature
0m 11.25s: sent host signature and key point
0m 11.25s: got bus key
0m 11.26s: got data key
0m 11.51s: got unit key 1
0m 37.04s: got extended bdinfo
0m 37.04s: opened blu-ray
0m 37.04s: opening drive F
0m 37.11s: opened i/o
0m 37.12s: got disc type 0
0m 37.12s: got max lba 0
4m 05.97s: Blu-ray Copy: Main Movie
4m 05.97s: Source: E:/BDMV/
4m 05.97s: Playlist: 52
4m 05.97s: Chapters: 1 -> 32
4m 05.97s: TotalSize: 27861 MB
4m 05.98s: SourceSize: 27861 MB
4m 05.98s: RemoveHDAudio: 0
4m 05.98s: CompressToAC3: 0
4m 05.98s: OutputSize: 46100 MB
4m 05.98s: OutputDisc: BDMV
4m 05.98s: OutputTarget: BD50
4m 05.98s: OutputVideo: 1080p/i
7m 17.34s: Blu-ray Copy: Main Movie
7m 17.34s: Source: E:/BDMV/
7m 17.34s: Playlist: 52
7m 17.36s: Chapters: 1 -> 32
7m 17.36s: TotalSize: 27861 MB
7m 17.36s: SourceSize: 27861 MB
7m 17.36s: RemoveHDAudio: 0
7m 17.36s: CompressToAC3: 0
7m 17.36s: OutputSize: 46100 MB
7m 17.36s: OutputDisc: BDMV
7m 17.36s: OutputTarget: BD50
7m 17.36s: OutputVideo: 1080p/i
24m 23.76s: Warring : Null Data at Work
24m 55.96s: opening folder D:/DVDFab Temp/MainMovie/18020466_CARS_USA/BDMV/
24m 57.51s: opening folder D:/DVDFab Temp/MainMovie/18020466_CARS_USA/BDMV/
24m 57.54s: got bdmv
24m 57.54s: got extended bdinfo
25m 18.09s: Burn data size is: 23000
25m 18.09s: Burn disc space is: 23866
25m 38.43s: Blu-ray Copy: Main Movie
25m 38.43s: Source: D:/DVDFab Temp/MainMovie/18020466_CARS_USA/BDMV/
25m 38.43s: Playlist: 0
25m 38.43s: Chapters: 1 -> 32
25m 38.43s: TotalSize: 27861 MB
25m 38.43s: SourceSize: 27861 MB
25m 38.43s: RemoveHDAudio: 0
25m 38.43s: CompressToAC3: 0
25m 38.45s: OutputSize: 23000 MB
25m 38.45s: OutputDisc: BDMV
25m 38.45s: OutputTarget: BD25
25m 38.45s: OutputVideo: 1080p/i
25m 38.45s: info: enable bd copy(mode=0)
25m 38.45s: info: video encode mode(0), bitrate(17314), lr-encode(no)
25m 38.45s: info: streams(4113.2)
25m 38.45s: info: blu-ray copy begin (unit[elem[atomic[00060.m2ts]]])
25m 38.45s: try to use gpu acceleration(1) for video decoding
25m 38.45s: CUDA GPU acceleration for video decoding enabled
25m 39.47s: GPU acceleration for video encoding enabled
25m 39.47s: info: h264_encode: encode param profile(2) level(41) bitrate(17314)
25m 42.48s: info: processing source(00060.m2ts)

I am going to try one more thing. The Nvidia drivers 310.64 are beta of a new build. I am going to download 306.97, the last WHQL build and see if it makes any difference. Willl attempt the conversion off those drivers and post back

bobmitch

Nvidia 306.97 WHQL installed. 3:58 into the conversion and 11.05%, the conversion stalls and program just sitting there...slowly the conversion speed of 16.54 mb/s is dropping to 0. Still no success! There is something wrong with the the program and CUDA. So we have finally derived that reading isn't the issue, it's the conversion to BD25.

shanecnz

Hi bobmitch

try doing a conversion from the folder copy using 8.2.2.2, you can have them both installed at once. Leave CUDA enabled with that version.