Wrath of the Titans 3D disk "read error"

[me1999me]

I burned the 2D disk ok no problem.
While ripping Wrath of the Titans 3D I got
"error while reading"

Log:

DVDFab 9.0.6.0 (2013/09/28 11:16:33)

0m 00.51s: Start preload dll...
0m 00.56s: Load dll successful.
0m 00.56s: Start load fabplay dll...
0m 00.62s: Load fabplay dll successful.
0m 00.62s: Windows os type is: 13.
0m 00.62s: Transfer settings successful.
0m 01.31s: GPUAccelerate: 12351
0m 01.31s: CUDA cap: 1
0m 01.31s: Support coreavc decode: 0
0m 01.31s: Graphics info: NVIDIA GeForce GTX 560 : 5.0 : 2.1
0m 01.32s: Load config successful.
0m 01.75s: Parse string is: OV:9063
0m 01.75s: Parse string is: BV:9067
0m 01.75s: Option check status: Local
0m 01.75s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1
0m 01.75s: Start get sys number.
0m 01.75s: Serial number is: 10-bf-48-7d-24-05
0m 01.75s: Reg URL link is:
0m 01.75s: Version is: 9060
0m 01.75s: Product is: 2
0m 01.75s: Connect type is: 1
0m 02.08s: Init GPU settings sucessful.
0m 02.08s: CommmandLine:
0m 02.45s: Begin init preview play engine.
0m 02.46s: Init DirectShow engine successful.
0m 02.90s: Profile Manager :: End Load Profile
0m 04.14s: Times of connecting error is: 0
0m 04.15s: Parse string is: OV:9063
0m 04.15s: Parse string is: BV:9067
0m 04.15s: Option check status: NewWork
0m 04.15s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1
0m 06.26s: Init burn engine successful.
0m 06.45s: Get update info start
0m 06.45s: Product type is: 2
0m 06.45s: Version is: 9063
0m 06.46s: URL link is:
0m 06.46s: Language type is: ENU
0m 06.50s: opening drive F
0m 06.50s: opened i/o
0m 06.51s: got media type 15
0m 06.96s: got max lba 16400479
0m 07.23s: Update version: 1.0
0m 07.23s: Status is: 1
0m 07.23s: Download url:
0m 07.23s: Version Data:
0m 07.63s: got disc type 20
0m 07.63s: type Blu-ray BDMV
0m 07.63s: volume label WRATH_OF_THE_TITANS
0m 07.72s: internal path F:/BDMV/
0m 07.73s: aacs 1 bd+ 0
0m 08.08s: got bdmv
0m 08.08s: movie name: wrath of the titans||wrath_of_the_titans
0m 08.11s: got agid 0
0m 08.18s: sent host cert chal
0m 08.20s: got drive cert chal
0m 08.20s: BEC 1
0m 08.20s: DRIVE_VENDOR 0x0067
0m 08.26s: got drive key
0m 08.26s: got host key signature
0m 08.26s: verified drive signature
0m 08.26s: verified host signature
0m 08.32s: sent host signature and key point
0m 08.32s: got bus key
0m 08.33s: got volume id
0m 08.33s: got volume id mac
0m 08.33s: volume id is correct
0m 08.33s: got vid
0m 08.46s: blu-ray 8E139A3B9ECC15A1582074775D1B77282326FA6A
0m 08.86s: cert BEE=0x00 same
0m 11.51s: D 835EBAB7
0m 11.51s: detected cinavia
0m 11.51s: got vuk
0m 11.72s: got unit key 1
0m 17.04s: got bdmv
0m 19.85s: got extended bdinfo
0m 19.85s: opened blu-ray
27m 53.42s: read error: 11 7033086 7042397 7035198 63
29m 11.63s: read error: 11 7033086 7042397 7035198 63
29m 37.43s: read error: 11 7033086 7042397 7035198 63
30m 22.61s: read error: 11 7033086 7042397 7035198 63

[glenns]

Read errors are normally caused by dirty or scratched disks or dirt on the laser lens so clean the disk good no fingerprints.One person recommends furniture polish but if their are deep scratches your not going to be able to copy it.Also your using a old fab program update to version 9068 and check your blu ray drive to see if it has the latest firmware on it.

To the guy that recommends polish what brand are you using and spray or paste? do you let it sit rub it in or what?

[90312]

Discs are made of polycarbonate plastic which is not resistant to organic solvents, I would be very cautious using furniture polish since most all contain solvents to make them spread more easily. I would test on a coaster first.

[billegge]

Clean with natural oils from your hand

I discovered that if I "clean" the disc with my hands then the error goes away. I have done this twice with success. I think its the oil filling tiny specs. Just take your whole hand and pretend its a cleaning cloth and rub the whole disk.