3D Copy Star Trek Into Darkness 3D

[drmark12pa]

I'm having issues copying my Star Trek Into Darkness 3D BD. I've tried on both latest software 9.1.1.9 and going back to version 9.0.7.2 as suggested in another closed thread. I've tried both CLONE and MAIN MOVIE.
However, I continually have it stall at 46% with an error which I try to skip but still goes no further. The BD itself has no visible imperfections and I've even used my powered disc cleaner to buff it hoping I may not visibly see something but still no change. It appears in the log at 27 41 26 that there is a read error though I'm not sure if that is a physical error due to disc scratch for example or a software burning error reading the disc

Here are my logs:
1m 05.17s: Init driveX with I/O mode: 0
1m 05.17s: Init driveX with I/O mode: 0
1m 05.54s: opening drive F
1m 05.57s: opened i/o
1m 05.57s: opening drive K
1m 05.58s: opened i/o
1m 35.91s: opening drive F
1m 37.17s: opened i/o
1m 37.18s: got media type 15
1m 37.53s: got max lba 21863935
1m 38.50s: got disc type 20
1m 38.50s: type Blu-ray BDMV
1m 38.50s: volume label Star_Trek_Into_Darkness_3D
1m 38.51s: internal path F:/BDMV/
1m 38.90s: aacs 1 bd+ 0
1m 39.02s: got bdmv
1m 39.03s: movie name: star trek into darkness 3d||star_trek_into_darkness_3d
1m 39.03s: got agid 0
1m 39.05s: sent host cert chal
1m 39.06s: got drive cert chal
1m 39.06s: BEC 0
1m 39.06s: DRIVE_VENDOR 0x0074
1m 39.09s: got drive key
1m 39.10s: got host key signature
1m 39.10s: verified drive signature
1m 39.10s: verified host signature
1m 39.14s: sent host signature and key point
1m 39.14s: got bus key
1m 39.14s: got volume id
1m 39.14s: got volume id mac
1m 39.15s: volume id is correct
1m 39.15s: got vid
1m 39.25s: blu-ray FA6BDBA882562979B051FCEB67463761524D5749
1m 39.68s: cert BEE=0x00 same
1m 41.09s: got agid 0
1m 41.11s: sent host cert chal
1m 41.11s: got drive cert chal
1m 41.12s: BEC 0
1m 41.12s: DRIVE_VENDOR 0x0074
1m 41.15s: got drive key
1m 41.15s: got host key signature
1m 41.16s: verified drive signature
1m 41.16s: verified host signature
1m 41.19s: sent host signature and key point
1m 41.19s: got bus key
1m 43.67s: D EF01367D
1m 43.67s: got vuk
1m 43.67s: got unit key 7
1m 51.34s: got bdmv
2m 02.17s: got extended bdinfo
2m 02.17s: opened blu-ray
3m 31.22s: BD MainMovie watermark flag: 0
3m 31.23s: Blu-ray Copy: Main Movie
3m 31.23s: Source: F:/BDMV/
3m 31.23s: Playlist: 800
3m 31.23s: Chapters: 1 -> 17
3m 31.23s: TotalSize: 41578 MB
3m 31.23s: SourceSize: 41578 MB
3m 31.24s: RemoveHDAudio: 0
3m 31.24s: CompressToAC3: 0
3m 31.24s: OutputSize: 46100 MB
3m 31.24s: OutputDisc: BDMV
3m 31.24s: OutputTarget: BD50
3m 31.24s: OutputVideo: 1080p/i
3m 31.24s: 3DMode: Blu-ray 3D
3m 31.25s: info: enable bd copy(mode=1)
3m 31.25s: info: streams(4113.1,4352.1,4356.1,4608.1,4609.1)
3m 31.25s: info: blu-ray copy begin (unit[elem[atomic[00800.ssif]]])
3m 31.26s: info: processing source(00800.ssif)
27m 41.26s: read error: 11 9901962 9911177 9910014 800
93m 56.32s: user cancelled
93m 56.76s: info: filter:filter_mux_mpeg
93m 56.76s: info: filter:filter_splitter
93m 56.76s: info: fifo:46c-filter_mux_mpeg-0-1,block:1
93m 56.76s: info: fifo:46c-filter_mux_mpeg-4-1,block:0
93m 56.76s: info: filter:505.08
93m 56.85s: info: fifo:46c-filter_splitter-0-6,block:0
93m 56.85s: info: fifo:46c-filter_mux_mpeg-1-2,block:0
93m 56.85s: info: fifo:46c-filter_mux_mpeg-2-2,block:3
93m 56.85s: info: fifo:46c-filter_mux_mpeg-3-5,block:0

[october262]

if it continue to stall at the same place then it is a bad/defective disc.
just because the movie plays fine doesn't mean it will copy.
the disc has some sort of manufacturing defect.