Announcement

**glenns** · 01-08-2014, 12:51 PM

Your blu ray burner is out of date their is new firmware for it.

As with any Firmware updates make sure you follow all directions to the letter or you can trash your burner.

**curt** · 01-08-2014, 06:29 PM

upgraded firmware, problem still there. I did go back and re-test The Wolverine which i had backed up few days ago and it was found and loaded. Here is the logs from today's failure as follows after cleaning the disc just in case:

DVDFab 9.1.2.2 (2014/01/08 10:21:06)

0m 00.12s: App info: 2014-1-8
0m 00.12s: App info: 9.1.2.2 9122 Official
0m 00.12s: App info: client type 2.
0m 00.14s: Fabplay load: preload successful.
0m 00.20s: Fabplay load: Load successful.
0m 00.20s: Init process: Transfer settings successful.
0m 00.21s: info: fabcheck logpath= C:/Users/alchemy/Documents/DVDFab9/Log/
0m 00.21s: fab_check_gpu is running ...
0m 00.34s: fab_check_gpu run successful
0m 00.34s: info: recommand= 8248, Shrink support= 1, enable= 1, cuda_cap= 1 , cpu_count= 4
0m 00.34s: GPU check: GPUAccelerate-12351
0m 00.34s: GPU check: GPUAccelerate setting-8248, 8248
0m 00.34s: GPU check: CUDA cap-1
0m 00.34s: GPU check: Support coreavc decode-0
0m 00.34s: GPU check: Lighting shrink status-1, 1
0m 00.34s: GPU check: Graphics info: NVIDIA GeForce GT 430 : 5.50 : 2.1
0m 00.35s: Init process: Load config successful.
0m 00.35s: Init process: Windows os type is 13.
0m 00.35s: Init process: command line in is
0m 00.42s: Reg check: Parse string: ( 2:8260762964 )( 11:8260762964 )( 20:8260762964 )( 50:8260762964 )( 80:8260762964 )( 21:8260762964 )( 22:8260762964 )( 60:8260762964 )( 70:8260762964 )( 1:0 )( OV:9122 )( BV:9121 )( S:5edd941cffa9982e6c0f2b8af0a4abc0 )
0m 00.42s: Reg check: Option check status-Local
0m 00.42s: Reg check: ( HD Decrypter:1:0 )-( DVD to DVD (Gold):0:0 )-( DVD to DVD:1:1 )-( DVD to Mobile:1:1 )-( Blu-ray to Blu-ray:1:1 )-( Blu-ray to Mobile:1:1 )-( File to Mobile:1:1 )-( Blu-ray to DVD:1:1 )-( File to DVD:1:0 )-( File to Blu-ray:1:0 )-( File Mover:1:1 )-( Blu-ray to 3D:1:1 )-( 2D to 3D:1:1 )-( Blu-ray Decrypt:1:0 )-( DVD Decrypt:1:0 )-
0m 00.42s: App info: language type ENU.
0m 00.42s: Reg check: Start get sys number.
0m 00.42s: Reg check: Serial number is: 1c-6f-65-a8-6d-a6
0m 00.42s: Reg check: Connect type is: 0
0m 00.49s: Init process: Init GPU settings successful.
0m 00.65s: Init preview: Begin init preview play engine.
0m 00.88s: Init preview: Init internal engine successful.
0m 01.18s: Burn engine: start init.
0m 01.30s: Burn engine: engine type-0.
0m 01.30s: Burn engine: writer count 1.
0m 01.30s: Burn engine: 0- F:\ [HL-DT-ST BD-RE WH14NS40 1.01 (Usb)].
0m 01.30s: Burn engine: end init.
0m 01.48s: Reg check: Times of connecting error is: 0
0m 01.48s: Reg check: Parse string: ( S:9b56b2f965fda06d2206046b2a7bb44d
0m 01.48s: Reg check: Option check status-NewWork
0m 01.86s: Init process: Init setting page successful.
0m 01.92s: UI manager: switch to Copy mode.
0m 02.29s: Init process: init main ui successful.
0m 02.32s: Profile Manager :: End Load Profile
0m 02.55s: Init process: show main ui successful.
0m 02.55s: DriveX msg: Init driveX F with I/O mode: 0
0m 02.55s: DriveX msg: Init driveX G with I/O mode: 0
0m 05.28s: opening drive F
0m 05.32s: opened i/o
0m 05.34s: opening drive G
0m 05.34s: opened i/o
0m 08.71s: DriveX msg: adding media in driveX F.

**october262** · 01-08-2014, 06:45 PM

just because the disc plays fine in your ps3 doesn't mean it will copy.
exchange the disc at the store and try again.

**curt** · 01-09-2014, 12:41 AM

Thanks for the response. Yes im very well aware of that it may be playable on a standalone player and not work on pc drive even though spec says it must but thanks for that reply anyway as you would not of known if i knew or not.

I am contemplating to return it but wanted to verify to see if its an issue with the disc itself or something with dvdfab before going that route. In other words the fab folks or others had backed this title up before without issues, before i go thru the return process only to discover later that it was an issue with dvdfab. And so far no one has responded that it has worked for them which gives me some concern.

I had some time back order a movie from amazon and dvdfab did not work and got read errors. Returned it for new disc and got same error, after couple go rounds dvdfab got error but another tool did not that i tried out their trial version.

I also had another movie disc that i had backed up before with the 8.x version as i wanted to do some other conversions for it and under version 9 it would not read last two weeks. Finally found the 8.x version that worked before and got it backed up that way. That's why i'm hoping to hear some response either way before going the return route and possibly end up with same problem.

**october262** · 01-09-2014, 01:10 AM

if you don't want to return the disc, you might try an older version of dvdfab found
here - cause sometimes users have found older versions work too.

**curt** · 01-09-2014, 01:22 AM

thanks once again for your link, im gonna look into it also, it would be helpful though if the fab folks chimed in one way or another and thus save valuable time if you know what i mean or if someone else chimed in with the version that worked for them versus and hunt and hope method

**90312** · 01-09-2014, 02:17 AM

You might also turn off CUDA, your card is really marginal. Stranger things have happened

See attached:

Attached Files

**curt** · 01-10-2014, 05:49 AM

That did the trick. I had thought late last night about trying another test today with gpu accerlation disabled today. Your post reminded me of it and it worked for Elysium. Still had a problem with JOBS as fab 9 still did not see it and i tried many things.

Finally i had downloaded a trial version of another player and started it since my other pc player did not see it. After short while of disc spinning suddenly it was recognized and then Fab 9 saw it all of a sudden and then was able to get it backed up also. Thanks a bunch for all assistance from everyone involved

**90312** · 01-10-2014, 03:50 PM

Glad you got it sorted Curt!

Announcement

Can't open Elysium

Can't open Elysium

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment