Announcement

Collapse
No announcement yet.

Media inserted in not Blu-Ray????

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 2
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
    #1

    Media inserted in not Blu-Ray????

    I am using bata 7.0.5.8 and I still can't Full Disc, BD25 1080p option to work. Everything seems to copy just find but as soon as the movie ejects out and I put the blank blu-ray in I get the

    Media inserted in drive F: is not blu-ray disc. Please insert a blu-ray disc to start the copy process

    I have had no problems using these same discs to backup using the Main Movie at BD25 compression. I have the latest firmware on my Pioneer BDR-205 burner. I have tried changing the burn engines from imgburn to vso and I get the same results on both. The RITEK-BR2-00 media I have been using for over a year hasn't given me any problem on anything else in the past. Here are a few of the logs.

    DVDFab 7.0.5.8 (2010/05/17 00:56:15)

    0m 01.04s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 file2mobile 1 filemover 1
    0m 05.29s: detected blu-ray
    0m 05.43s: drive F
    0m 05.45s: volume label GODFATHER_PART2_USA
    0m 06.37s: root 8CABA28B476E5486_VOLUME_SET_ID:GODFATHER_PART2_USA :GODFATHER_PART2_USA:GODFATHER_PART2_USA
    0m 06.65s: aacs 1 bd+ 0
    0m 08.06s: got discinfo
    0m 08.07s: got bdmv
    0m 08.10s: got agid
    0m 08.18s: sent host cert chal
    0m 08.20s: got drive cert chal
    0m 08.25s: got drive key
    0m 08.25s: got host key signature
    0m 08.26s: verified drive signature
    0m 08.26s: verified host signature
    0m 08.32s: sent host signature and key point
    0m 08.32s: got bus key
    0m 08.96s: got volume id
    0m 08.98s: got volume id mac
    0m 08.98s: volume id is correct
    0m 08.98s: got vid
    0m 09.35s: got vuk
    0m 09.39s: got unit key 1
    0m 09.96s: got extended bdinfo


    DVDFab 7.0.5.8 (2010/05/17 01:11:11)

    0m 00.75s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 file2mobile 1 filemover 1
    0m 07.34s: detected blu-ray
    0m 07.46s: drive F
    0m 07.46s: volume label GODFATHER_PART2_USA
    0m 08.37s: root 8CABA28B476E5486_VOLUME_SET_ID:GODFATHER_PART2_USA :GODFATHER_PART2_USA:GODFATHER_PART2_USA
    0m 08.67s: aacs 1 bd+ 0
    0m 09.84s: got discinfo
    0m 09.87s: got bdmv
    0m 09.93s: got agid
    0m 10.00s: sent host cert chal
    0m 10.01s: got drive cert chal
    0m 10.06s: got drive key
    0m 10.06s: got host key signature
    0m 10.06s: verified drive signature
    0m 10.07s: verified host signature
    0m 10.12s: sent host signature and key point
    0m 10.12s: got bus key
    0m 10.78s: got volume id
    0m 10.78s: got volume id mac
    0m 10.78s: volume id is correct
    0m 10.78s: got vid
    0m 11.93s: got vuk
    0m 11.98s: got unit key 1
    0m 12.53s: got extended bdinfo


    DVDFab 7.0.5.8 (2010/05/17 03:37:08)

    0m 00.89s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 file2mobile 1 filemover 1
    0m 20.95s: detected blu-ray
    0m 20.96s: drive F
    0m 20.96s: volume label GODFATHER_PART2_USA
    0m 24.34s: root 8CABA28B476E5486_VOLUME_SET_ID:GODFATHER_PART2_USA :GODFATHER_PART2_USA:GODFATHER_PART2_USA
    0m 24.64s: aacs 1 bd+ 0
    0m 26.15s: got discinfo
    0m 26.18s: got bdmv
    0m 26.21s: got agid
    0m 26.29s: sent host cert chal
    0m 26.29s: got drive cert chal
    0m 26.35s: got drive key
    0m 26.35s: got host key signature
    0m 26.35s: verified drive signature
    0m 26.35s: verified host signature
    0m 26.42s: sent host signature and key point
    0m 26.42s: got bus key
    0m 27.06s: got volume id
    0m 27.06s: got volume id mac
    0m 27.07s: volume id is correct
    0m 27.07s: got vid
    0m 27.42s: got vuk
    0m 27.46s: got unit key 1
    0m 28.01s: got extended bdinfo
    7m 56.48s: compress begin: Blu-ray groups clips(00002.m2ts), playtime(14889 ms), size(50 MB)
    7m 56.50s: processing source(00002.m2ts)
    7m 56.51s: try to use gpu acceleration(1) for video decoding
    7m 56.51s: CUDA GPU acceleration for video decoding enabled
    8m 13.17s: filter(1 m:4): not get decoded frame(355-4)
    8m 14.62s: group(00002.m2ts ) playtime(14889 ms) source(50 MB) request(18 MB) real(17 MB) bitrate(8961 kbps)
    8m 14.65s: compress finished: groups request(18 MB, 18 MB) real(17 MB) average_bitrate(8961 kbps)
    8m 14.79s: compress begin: Blu-ray groups clips(00003.m2ts), playtime(12126364 ms), size(45552 MB)
    8m 14.82s: processing source(00003.m2ts)
    8m 14.82s: try to use gpu acceleration(1) for video decoding
    8m 14.82s: CUDA GPU acceleration for video decoding enabled
    8m 34.70s: filter(1 m:4): not get decoded frame(470-4)
    170m 12.87s: filter(1 m:4): not get decoded frame(290740-4)
    170m 14.37s: group(00003.m2ts ) playtime(12126364 ms) source(45478 MB) request(23286 MB) real(23068 MB) bitrate(7833 kbps)
    170m 14.43s: compress finished: groups request(23286 MB, 23286 MB) real(23068 MB) average_bitrate(7833 kbps)
    528m 14.26s: detected blu-ray
    528m 14.28s: drive F
    528m 14.28s: volume label
    543m 22.09s: detected blu-ray
    543m 22.10s: drive F
    543m 22.10s: volume label


    DVDFab 7.0.5.8 (2010/05/17 12:41:08)

    0m 01.11s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 file2mobile 1 filemover 1
    0m 07.34s: detected blu-ray
    0m 07.34s: drive F
    0m 07.36s: volume label
    0m 50.68s: detected blu-ray
    0m 50.70s: drive F
    0m 50.71s: volume label GODFATHER_PART2_USA
    0m 51.90s: root 8CABA28B476E5486_VOLUME_SET_ID:GODFATHER_PART2_USA :GODFATHER_PART2_USA:GODFATHER_PART2_USA
    0m 58.53s: aacs 1 bd+ 0
    1m 01.54s: got discinfo
    1m 02.61s: got bdmv
    1m 02.67s: got agid
    1m 02.75s: sent host cert chal
    1m 02.76s: got drive cert chal
    1m 02.84s: got drive key
    1m 02.84s: got host key signature
    1m 02.84s: verified drive signature
    1m 02.86s: verified host signature
    1m 02.90s: sent host signature and key point
    1m 02.92s: got bus key
    1m 03.82s: got volume id
    1m 03.82s: got volume id mac
    1m 03.84s: volume id is correct
    1m 03.84s: got vid
    1m 04.20s: got vuk
    1m 04.23s: got unit key 1
    1m 04.79s: got extended bdinfo


    2010-05-17 12:41:06 ---- ******************** Log session stop 17-May 12:41:06.237 PID 4812********************
    2010-05-17 12:40:30 Info Writable disc BD-R Sequential inserted. Ready to write
    2010-05-17 12:40:13 Info Parsing disc ...
    2010-05-17 12:25:20 Info Writable disc BD-R Sequential inserted. Ready to write
    2010-05-17 12:25:03 Info Parsing disc ...
    2010-05-17 06:27:40 Info Disc (BD-ROM) not emtpy.
    2010-05-17 03:37:43 Info Disc (BD-ROM) not emtpy.
    2010-05-17 03:37:41 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R, Blu Ray-R Seq., Blu Ray-R Rnd., Blu Ray-RE
    2010-05-17 03:37:41 Info Drive has Serial ATA physical interface
    2010-05-17 03:37:41 Info New Drive selected : 3:1:0 - PIONEER BD-RW BDR-205 1.08 [F] (Ide)
    2010-05-17 03:37:27 Info Current Drive selected : 1:0:0 - LITE-ON DVDRW LH-20A1H LL0C [E] (Ide)
    2010-05-17 03:37:27 Info Using Advanced SPTI interface
    2010-05-17 03:37:27 Info System default language : English (United States)
    2010-05-17 03:37:27 Info User default language : English (United States)
    2010-05-17 03:37:27 Info DLL Version : 4.0.7.466
    2010-05-17 03:37:27 Info DLL : C:\Program Files (x86)\DVDFab 7\vso_hwe.dll
    2010-05-17 03:37:27 Info Version : 7, 0, 5, 8
    2010-05-17 03:37:27 Info ExeName : C:\Program Files (x86)\DVDFab 7\DVDFab.exe
    2010-05-17 03:37:27 Info OS : Microsoft Windows 7 Ultimate (Build 7600)
    2010-05-17 03:37:27 ---- ******************** Log session start 17-May 03:37:27.440 PID 4812********************


    2010-05-17 00:56:46 ---- ******************** Log session stop 17-May 00:56:46.514 PID 5344********************
    2010-05-17 00:56:19 Info Current Drive selected : 1:0:0 - LITE-ON DVDRW LH-20A1H LL0C [E] (Ide)
    2010-05-17 00:56:19 Info Using Advanced SPTI interface
    2010-05-17 00:56:19 Info System default language : English (United States)
    2010-05-17 00:56:19 Info User default language : English (United States)
    2010-05-17 00:56:19 Info DLL Version : 4.0.7.466
    2010-05-17 00:56:19 Info DLL : C:\Program Files (x86)\DVDFab 7\vso_hwe.dll
    2010-05-17 00:56:19 Info Version : 7, 0, 5, 8
    2010-05-17 00:56:19 Info ExeName : C:\Program Files (x86)\DVDFab 7\DVDFab.exe
    2010-05-17 00:56:19 Info OS : Microsoft Windows 7 Ultimate (Build 7600)
    2010-05-17 00:56:19 ---- ******************** Log session start 17-May 00:56:19.274 PID 5344********************
    Tags: None
    #2
    captainken
    Please do yourself a favor, change your way of handling the process.
    (1) Rip your BD to HDD and use it as a source for processing
    (2) Process it to BD25 to iso from HDD to HDD
    (3) Burn your final BD25 iso to your disc outside DVDFab, using stand alone ImgBurn.
    This is your "customized" process. Try it.
    sigpic

    Please post your logs the default location is:
    For Win7 C:\Users\User Name\My Documents\DVDFab\Log
    For Vista C:\Users\User Name\Documents\DVDFab\Log
    For XP C:\Documents and Settings\User Name\My Documents\DVDFab\Log
    Please use attachment button and attach your most recent, Internal log and post right here.

    Comment

      #3
      Thanks IPopov50, I will give that a try.

      Comment

        #4
        Still having the same problem when I try to Backup using the Full Disc option with BD25 compression. I tried using Memorex BD-R Single Layers with the exact same result. However when I use BD-RE discs it works fine. I tried backing up using Full Disc with no compression using a Sony BD-RE DL 50GB and it worked fine. Then I tried again using a TDK BD-RE SL 25GB with BD25 compression this time and that worked also. The problems seem to happen every time I use BD-R (write once) media and the brand doesn't seem to matter.

        Comment

          #5
          Actually the Ritek-BR2-00s that you were using are most likely the exact same as the Memorex that you just switched to. I bought a few of those blue covered memorex and if I remember correctly that sounds like the media code for those as well. Go online and buy like one or two of a couple different kinds, preferably verbatim but I've been having great results with the Optical Quantums also which are about 2 bucks a piece on Newegg. Let us know if it works out for ya.
          SPECS
          DESKTOP: Asus M4A79XTD EVO/AMD Phenom II x4 945/4GB GSKILL DDR3-1600/NVIDIA GeForce GTX 260 Core 216 SC/BFG Tech 600Watt/NZXT M59/LG BD-RE GGW-H20L/Lite-On iHAS124 Y/WD Velociraptor 150GB/Seagate 1.5TB/WD Caviar Green 2TB/Acer H213H 1080p
          SERVER: MSI K9ND Speedster WA-6/2x AMD Opteron 2218s/8GB Kingston DDR2-667/NVIDIA Quadro FX 1700/Zalman 600Watt/Alienware Workstation/Lite-On iHAS120/Seagate 500GB/WD Caviar Black 750GB/Swiftech H20-220 w/ 2x CPU blocks & VGA block

          Comment

            #6
            Just installed 7.0.6.9 and I am still getting the media inserted in not Blu-Ray. It only happen when I use the Full Disc option, and only with discs that are not re-writable (write once discs). I have tried several brands now and have yet to find anything that work. Do you think this is a disc problem or something else? It happens using img burn as well as the vso writer. It don't matter if I burn to hard drive first as an image file or copy directly from disc. I have wasted at least 15 discs trying to figure this out. If I need to by another brand, what are people using that aren't getting this problem. Also I have about 80 of the RITEK-BR2-00 is there any way they can fix this with the next version update?

            Again no problems using the RITEK-BR2-00 or Memorex BD-R Single Layer with smaller discs that don't need compression ( less that about 23.1GB), and no problem compressing the larger Blu-Rays if I do the main movie only. It does happen 100% of the time I try a Full Disc option and use compression, unless of course I use an RW disc.

            Comment

              #7
              captainken,
              despite the fact that media you are using isn't the best one out there, but it workable under certain conditions, and those conditions are:

              aa. use ImgBurn as your burning engine with DVDFab. DVDFab doesn't have its own burning engine, but "subcontracting" one of three: VSO, Nero or ImgBurn. ImgBurn proven to be best. Unfortunately, because ImgBurn is a freeware, it can't be used in commercial software as DVDFab (in other words, you can't sell freeware). But you can make changes in a "aftermarket". So, please visit this thread, it explains how to make ImgBurn you burning engine:

              bb. Writing speed. If you google your media and found quite a few negative comments, don't panic, but reduce writing speed proportionally - more negative comments, less speed.

              Please try these recommendations and let us know.
              sigpic

              Please post your logs the default location is:
              For Win7 C:\Users\User Name\My Documents\DVDFab\Log
              For Vista C:\Users\User Name\Documents\DVDFab\Log
              For XP C:\Documents and Settings\User Name\My Documents\DVDFab\Log
              Please use attachment button and attach your most recent, Internal log and post right here.

              Comment

                #8
                I am using ImgBurn and have it set up just like it says on your link. Changing burning does nothing because as soon as I put the blank media in the tray (with Full Disk selected) the media is ejected back out in less than 10 seconds before during the scan before the burn process even starts and tell me the media isn't Blu-Ray. Changing the speed even to 1x does nothing.

                Comment

                  #9
                  Are u sure it's a Blu-ray??? Just asking
                  sigpic

                  Please post your logs the default location is:
                  For Win7 C:\Users\User Name\My Documents\DVDFab\Log
                  For Vista C:\Users\User Name\Documents\DVDFab\Log
                  For XP C:\Documents and Settings\User Name\My Documents\DVDFab\Log
                  Please use attachment button and attach your most recent, Internal log and post right here.

                  Comment

                    #10
                    100 percent I can select main movie and max write speed and burn a perfect backup all 23.1 GB worth. I have burn many using main movie and have been doing so since when version 6 first came out. Now with version 7, yes I have tried every update including all the betas and every I go to full disc it scans and ejects back out but then using the exact same it will burn using main movie.

                    Comment

                      #11
                      Hmmm... Lets wait for another opinion.....
                      sigpic

                      Please post your logs the default location is:
                      For Win7 C:\Users\User Name\My Documents\DVDFab\Log
                      For Vista C:\Users\User Name\Documents\DVDFab\Log
                      For XP C:\Documents and Settings\User Name\My Documents\DVDFab\Log
                      Please use attachment button and attach your most recent, Internal log and post right here.

                      Comment

                        #12
                        You know what, while we are waiting.... ImgBurn log would help a lot, can you retrieve and post it please
                        sigpic

                        Please post your logs the default location is:
                        For Win7 C:\Users\User Name\My Documents\DVDFab\Log
                        For Vista C:\Users\User Name\Documents\DVDFab\Log
                        For XP C:\Documents and Settings\User Name\My Documents\DVDFab\Log
                        Please use attachment button and attach your most recent, Internal log and post right here.

                        Comment

                          #13
                          I will send it in tomorrow, I am out of town today and don't have access to my desktop.

                          Comment

                            #14
                            OK, Thanks
                            sigpic

                            Please post your logs the default location is:
                            For Win7 C:\Users\User Name\My Documents\DVDFab\Log
                            For Vista C:\Users\User Name\Documents\DVDFab\Log
                            For XP C:\Documents and Settings\User Name\My Documents\DVDFab\Log
                            Please use attachment button and attach your most recent, Internal log and post right here.

                            Comment

                              #15
                              Here is the dvdfab_internal file that was created when I ripped to blue ray to the hard drive to create the image file. Every thing looks good to me and it worked perfect.

                              DVDFab 7.0.6.9 (2010/06/06 15:34:12)

                              0m 00.78s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 file2mobile 1 filemover 1
                              0m 02.15s: detected blu-ray
                              0m 02.20s: drive F
                              0m 02.20s: volume label ID4_US_V2
                              0m 03.17s: root 376E7A08ID4_US_V:ID4_US_V2:ID4_US_V2:ID4_US_V2
                              0m 03.67s: aacs 1 bd+ 1
                              0m 36.86s: got discinfo
                              0m 40.67s: got bdmv
                              0m 41.78s: got agid
                              0m 41.86s: sent host cert chal
                              0m 42.25s: got drive cert chal
                              0m 42.65s: got drive key
                              0m 42.65s: got host key signature
                              0m 42.67s: verified drive signature
                              0m 42.67s: verified host signature
                              0m 42.79s: sent host signature and key point
                              0m 42.79s: got bus key
                              0m 43.51s: got volume id
                              0m 43.51s: got volume id mac
                              0m 43.51s: volume id is correct
                              0m 43.65s: got vid
                              0m 54.78s: got vuk
                              0m 54.78s: got fut
                              0m 54.84s: got unit key 1
                              0m 58.37s: got extended bdinfo
                              1m 13.12s: no estimated compressable blocks
                              1m 13.12s: no estimated compressable blocks
                              1m 14.06s: no estimated compressable blocks
                              1m 14.06s: no estimated compressable blocks
                              1m 25.34s: no estimated compressable blocks
                              1m 25.34s: no estimated compressable blocks
                              1m 40.06s: no estimated compressable blocks
                              75m 09.45s: detected blu-ray
                              75m 09.48s: iso C:\Users\Ken\Documents\DVDFab\ISO\ID4_US_V2.iso
                              75m 09.48s: volume label ID4_US_V2
                              75m 09.53s: root 3CC680F6014436C1:ID4_US_V2:ID4_US_V2:ID4_US_V2
                              75m 09.56s: aacs 0 bd+ 0
                              75m 10.20s: got discinfo
                              75m 10.26s: got bdmv
                              75m 10.57s: got extended bdinfo
                              75m 39.82s: detected blu-ray
                              75m 39.82s: drive F
                              75m 39.84s: volume label
                              78m 50.45s: detected blu-ray
                              78m 50.46s: drive F
                              78m 50.46s: volume label



                              There is no dvdfab_burn_vso file because the black blu-ray is ejected out by DVDFab before ImgBurn even opens up.

                              I do however have an idea what the problem might be, look at the file below, the dvdfab_burn_vso file. I have the software set to burn using ImgBurn so I am not sure why it is creating this file at all. Plus it is looking at my E drive, the LITE-ON DVD burner (not blu-Ray), the blu-ray is my F: drive. It is looks like when I select the Full Disc option for some reason the vso buring engine opens the E: drive (non ble-ray drive) and can't find the blank blu-ray media when is F: drive.

                              The really odd thing is this only happens when I select Full Disc and not when I select the Main Movie option. It also doesn't happen when I use any kind of RW Blu-Ray media. What do you think?


                              2010-06-06 15:32:13 ---- ******************** Log session stop 06-Jun 15:32:13.691 PID 4396********************
                              2010-06-06 15:31:01 Info Current Drive selected : 1:0:0 - LITE-ON DVDRW LH-20A1H LL0C [E] (Ide)
                              2010-06-06 15:31:01 Info Using Advanced SPTI interface
                              2010-06-06 15:31:01 Info System default language : English (United States)
                              2010-06-06 15:31:01 Info User default language : English (United States)
                              2010-06-06 15:31:01 Info DLL Version : 4.0.7.466
                              2010-06-06 15:31:01 Info DLL : C:\Program Files (x86)\DVDFab 7\vso_hwe.dll
                              2010-06-06 15:31:01 Info Version : 7, 0, 6, 9
                              2010-06-06 15:31:01 Info ExeName : C:\Program Files (x86)\DVDFab 7\DVDFab.exe
                              2010-06-06 15:31:01 Info OS : Microsoft Windows 7 Ultimate (Build 7600)
                              2010-06-06 15:31:01 ---- ******************** Log session start 06-Jun 15:31:01.286 PID 4396********************

                              Comment

                              Previous 1 2 template Next
                              Working...
                              X