Announcement

Collapse
No announcement yet.

Analyize forever

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Analyize forever

    BluRay Iron Man 2

    The process starts well and commences to analyize at 59% the timer is still going, the program is still running the BD drive light flickers occasionally but after just too long there is no progress beyond 59%.

    Internal log as follows

    DVDFab 8.0.2.8 (2010/10/23 18:52:56)

    0m 01.63s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 file2mobile 1 filemover 1
    0m 06.89s: detected blu-ray
    0m 06.89s: drive F
    0m 06.91s: blu-ray type 1
    0m 06.91s: volume label IRON_MAN_2_D1_EU
    0m 07.95s: detected blu-ray
    0m 07.95s: drive G
    0m 07.95s: blu-ray type 0
    0m 07.95s: volume label UDF Volume
    0m 09.57s: detected blu-ray
    0m 09.57s: drive F
    0m 09.57s: blu-ray type 1
    0m 09.59s: volume label IRON_MAN_2_D1_EU
    0m 10.92s: root 8CCF808B2BCA3B24_VOLUME_SET_ID:IRON_MAN_2_D1_EU:IR ON_MAN_2_D1_EU:IRON_MAN_2_D1_EU
    0m 11.93s: aacs 0 bd+ 0
    0m 12.73s: got discinfo
    0m 12.94s: got bdmv
    0m 33.75s: stream(27,2,1)/clip(27,3,1) infos are not the same, using clip info to regulate it.
    0m 34.11s: stream(27,2,1)/clip(27,3,1) infos are not the same, using clip info to regulate it.
    0m 34.46s: stream(27,2,1)/clip(27,3,1) infos are not the same, using clip info to regulate it.
    0m 35.25s: stream(27,2,1)/clip(27,3,1) infos are not the same, using clip info to regulate it.
    0m 35.78s: stream(27,2,1)/clip(27,3,1) infos are not the same, using clip info to regulate it.
    0m 36.09s: stream(27,2,1)/clip(27,3,1) infos are not the same, using clip info to regulate it.
    0m 36.45s: stream(27,2,1)/clip(27,3,1) infos are not the same, using clip info to regulate it.
    0m 36.70s: stream(27,2,1)/clip(27,3,1) infos are not the same, using clip info to regulate it.
    0m 56.92s: got extended bdinfo

    Forced to cancel after 2.03 hrs running.

    This is the 3rd time as I started earlier in the day to archive this disk, have tried with Pathplayer off and on, tried with no compression to HDD.

    No write/read errors because it never gets that far!

    System:
    ASUS P6X58 Premium
    Intel i7 950
    12Gb Corsair DDR3
    LG BH10LS30 SATA II
    SLI 2 x MSI Cyclone GTX460

    2 earlier DVD's archived with no problems, even tried installing passkey before burning thinking it might remove some of the protection.


    David
    Tags: None
    #2
    I was having the same problem with Ironman2 when copying main movie only with no compression to HD using v8.0.1.7 and even v8.0.2.4 it was taking an hour to scan which was normally 5/10 min and 4/5 hrs to copy to HD which was normally about 1hr 20min...because of the newer protection on the disc...I then tried v7.0.8.2 and it worked fine...I then used v8.0.2.4 to compress to dvd9 iso and the back-up worked perfectly.

    Comment

      #3
      Originally posted by berdman View Post
      and even v8.0.2.4 it was taking an hour to scan which was normally 5/10 min and 4/5 hrs to copy to HD which was normally about 1hr 20min...because of the newer protection on the disc.
      Iron Man II only has AACS. It should not take any longer to copy it based on that.

      Comment

        #4
        Well that's what I had to do get it backed-up....and it worked

        Comment

          #5
          Hi djmorgan,

          Do you use original disc?

          From the log "0m 11.93s: aacs 0 bd+ 0" it seems the disc doesn't have AACS.

          Best Regards,
          Fengtao
          DVDFab is the all-in-one software package for copying Blu-ray/DVD and converting video file.
          http://www.dvdfab.cn

          Comment

            #6
            Ahh yes, good catch Fengtao.

            djmorgan: All commercial Blu-rays come with AACS protection on them, and if it isn't on there, especially for a disc as popular as Iron Man 2, it means you're trying to use a backup copy of it instead of the original disc. Use the original instead, it will probably work a little better.
            SPECS
            DESKTOP: Asus M4A79XTD EVO/AMD Phenom II x4 945/4GB GSKILL DDR3-1600/NVIDIA GeForce GTX 260 Core 216 SC/BFG Tech 600Watt/NZXT M59/LG BD-RE GGW-H20L/Lite-On iHAS124 Y/WD Velociraptor 150GB/Seagate 1.5TB/WD Caviar Green 2TB/Acer H213H 1080p
            SERVER: MSI K9ND Speedster WA-6/2x AMD Opteron 2218s/8GB Kingston DDR2-667/NVIDIA Quadro FX 1700/Zalman 600Watt/Alienware Workstation/Lite-On iHAS120/Seagate 500GB/WD Caviar Black 750GB/Swiftech H20-220 w/ 2x CPU blocks & VGA block

            Comment

              #7
              Originally posted by fengtao View Post
              Hi djmorgan,

              Do you use original disc?

              From the log "0m 11.93s: aacs 0 bd+ 0" it seems the disc doesn't have AACS.

              Best Regards,
              Fengtao
              On my last attempt I used your DVDPasskey, I assume that removed the protection before I used DVDFab

              David

              Comment

                #8
                Originally posted by Racem22 View Post
                Ahh yes, good catch Fengtao.

                djmorgan: All commercial Blu-rays come with AACS protection on them, and if it isn't on there, especially for a disc as popular as Iron Man 2, it means you're trying to use a backup copy of it instead of the original disc. Use the original instead, it will probably work a little better.
                Nope! see previous

                David

                Comment

                  #9
                  iron man 2

                  I have tried to copy this BR but it takes over 2 hours to scan (shoul be about 15 mins) then after anlysis it shuts down, (can't remember code) This also happended with bad lieutenant, this is after i have installed the latest versionb. my DVD passkey is for V6. Any help?

                  Comment

                  Previous template Next
                  Working...
                  X