Burn Freezes at 20% - un-detects drive

[prentissg]

Install new SATA Samsung SH-S223C writer. Downloaded 8.0.8.5 after first set of freezes. Had 8.0.6.?. Program or defective DVD drive?

Tried to clone, then write data, then re-rip to disc...from hard drive copy previously ripped from original to hard drive. Nothing worked- "Process Failed, error 102()".......

Then tried to rip an original disc to disc - same thing with Process Failed (at about 15-20% of rip) and then the dvd drive was no longer detected.

So it doesn't matter where the source is, the process fails with error 102(), but copy/re-rip from dvd drive source "un"detects the drive. It comes back with reboot of machine.

Disabled path player on last try.

log attached

Forgot to mention that a regular disc plays just fine and a cd plays fine - it's just the "copy process started" when it freezes into 20%.....

[CBR929]

Hi prentissg
Have you gone through and check the cables to the new drive?
Could be a bad drive.
CBR929

[prentissg]

Yes, have checked all cables. I have also tried copying a totally originally unprotected disc. Disc to disc - and received the same issue.

[W&B]

Go to device manager and uninstall the drive then reboot and windows will re-install it. Then I suggest installing ImgBurn and use it as the burn engine, just let Fab rip the original disc to the hdd then open ImgBurn for the burn process.
This may or may not help but worth a shot and click the link in my sig to see instructions on how to set the aws for ImgBurn (burn speed). Hope this helps.

Edit: second post in this thread , first link is a video on how to configure Fab to work with ImgBurn and set the aws, just use the pause feature in the youtube player and take your time if you prefer videos instead of written instructions.

[prentissg]

Thanks - however, after I installed imagburn and tried to rip and then copy to disc w/burn AND tried to "Build" and burn from HDD file, both stopped writing after about 1/4-1/3 of the disc.

It gave me the error message attached.

Same effective result as using the VSO burn engine....so I guess it is the burner?

[90312]

Those are DMA errors, couple things to try: replace the cable, uninstall the controller and reboot or try to find updated drivers for the controller. Also check for for an updated chip set driver.