Not able to open "The Smurfs"

[nefy]

Sorry i for got the files for the dma reset and time for burning, here they are

SORRY I FOR GOT THE FILES FOR THE DMA RESET AND TIME FOR BURNING IN MY LAST POST, HERE THEY ARE

[nefy]

Manual reset of dma and time took for the smurfs

Here is how to reset the dma manually in case fab does not completely do the reset.
Go to control panel, administrative tolls, computer management, device management, ide ata/atapi controllers, look at the primary and secondary, right click and go to properties then to advance settings and all should have dma transfer mode, depending on the system the dma mode number can be different but it should not say pio any where in there, if it does then change to dma or dma if available. After you do so and restart the computer, go back and look a the settings if still some of them go back to pio, then you need to go and uninstall the primary or secondary channel hat has the wrong setting, restart the computer again and the system will go thru the process of: Found new hardware and install it again, i may ask you to restart the computer again, after that go back and verify the changes again.
The dma transfer mode usually go back to pio when you have a bad dvd disc inserted or the dvd has a skip error or read error so it is good to keep an eye on it, you will notice the change when your burning time takes a long time.
I also had a hard drive that was defective, it will save the info but took a long time to save anything to it, this also affects the burning time or copy times, as well as the size and available disc space, i use 1 tb hard drives 7200 rps, they work very good. Do not copy to the c drive it will take longer as well and slow your system down when copying with fab while doing other stuff in the computer, use a secondary hard drive to do all the copying or burning from. I am including the images of the reset dma manually as well as proof on the time it took the smurfs to copy to hard drive on my computer.
Hope all this helps, but again you are doing it on your own discretion, i am not responsible for any changes in your system.:d

[nefy]

Did it take the same amount of time as me or longer?

DID IT TAKE THE SAME AMOUNT OF TIME AS ME OR LONGER?

[gentleben]

great , i did reset dma , as mentioned by nefy,and still takes same amount of time Full Disc

[aalaska99]

The Smurfs WORK FULL DISC

Gentleben, I did the same thing in full Disc
1. Abourt in opening
2. Analying clik IGNORE About 10 Times
3. Copy Process IGNOR ALL at 97.56% it will take some time
4. All done

Good Luck to all

[nefy]

Smurfs copied in 6 min 9 sec with english and spanish substitles/language

MAKE SURE YOUR DMA IS RESET, YOU CAN DO SO MANUALLY OR THRU DVD FAB, SOMETIMES DVD FAB WILL RESET IT BUT NOT COMPLETELY SO YOU WILL HAVE TO DO SO MANUALLY THRU THE CONTROL PANEL ADMIN TOOLS( IF YOU NEED HELP DOING SO LET ME KNOW SO I CAN PUT ALL THE STEPS DOWN), MY DVD BURNER WENT FROM 5 MINUTES BURNING TO 45 MINUTES BURNING EVEN RESETTING IT THRU FAB, WHEN I MANUALLY RESET IT WHEN BACK TO COPY A FULL VIDEO TS FOLDER ON A 4GB DVD IN UNDER 5 MINUTES.
ANY WAY, AFTER YOU INSERT YOUR SMURFS MOVIE, I TOOK ME 8 SECONDS TO GIVE ME THE READ ERROR, I HIT ABORT, CLICK AFTER THE ERROR WAS GONE: MAIN MOVIE.
ON THE RIGHT WERE IT SHOWS ALL WHAT IS ON THE DVD I SELECTED THE TITLE 1(1) WHICH IS 1:42:36, THEN ON THE NEXT COLUMN (AUDIO AND SUBTITLES) SELECTED BOTH ENGLISH AND SPANISH(LANGUAGE AND SUBTITLES), HIT NEXT THEN MAKE SURE THAT THE ONLY CHECK MARK IS ON COPY-DVD VIDEO, MAKE SURE TO HAVE A TARGET SELECTED WHERE IT WILL COPY THE VIDEO TS FOLDER(THE MOVIE), THEN HIT START.
IT TOOK 6 MIN 09 SECONDS TO COPY THE MOVIE TO THE HARD DRIVE, THEN I USED NERO TO RECORD TO DVD WHICH TOOK ANOTHER 5 MINUTES TO BURN A COPY.
THE MOVIE PLAYED FINE, HAD ALL ENGLISH AND SPANISH SUBTITLES AND LANGUAGES, I DID NOT SEE ANY DIFFERENCE ON THE ORIGINAL AND THE COPY.

BY THE WAY, I AM USING VERSION 8.1.3.6 (NOTE: AT FIRST I DID INSTALL THE NEW 8.1.3.6 VERSION, DID NOT WORK WITH THE SMURFS, SO I RE INSTALLED THE VERSION ON TOP OF THE OTHER AGAIN AND ALL WORKS FINE SINCE)

[gentleben]

8136 works

open dvd source =retry then abort , analyzing starts hit ignor all aprox 2 mins..copy starts then hit ignor all . Will do full disc but takes aprox 1hr 40 mins..... Also works on customize . Remove foreign lang and movies 2 & 3. Copy takes about 50 mins... Last vts 05 takes a while . Will do full disc. Both played well . 16 chapters 1:42.39 long same as original

[A.Glidden]

Log

DVDFab 8.1.3.6 (2011/12/02 10:59:49)

0m 00.46s: Qt Translator file load success
0m 00.49s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 30.01s: detected dvd
0m 30.06s: drive D
0m 30.06s: dvd type 1
0m 30.06s: volume label SMURFS
0m 30.20s: got copyright 1 fe
0m 30.81s: got udf/iso
0m 40.93s: got discinfo
0m 41.59s: pathplayer enabled
1m 44.36s: read error: 0 572793815 1956302949 3270796 5872379 176749096 3270796
3m 38.33s: pathplayer drive error 1
3m 38.33s: pathplayer drive error 1
3m 38.33s: pathplayer drive error 1
3m 38.35s: failed to open disc 1


DVDFab 8.1.3.6 (2011/12/02 11:03:41)

0m 00.48s: Qt Translator file load success
0m 00.49s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 31.27s: detected dvd
0m 31.32s: drive D
0m 31.32s: dvd type 1
0m 31.32s: volume label SMURFS
0m 31.46s: got copyright 1 fe
0m 32.12s: got udf/iso
0m 34.53s: got discinfo
0m 35.17s: pathplayer enabled
1m 29.52s: read error: 0 -2020268948 1956302949 3270796 5872379 177732136 3270796
1m 38.43s: got dvdinfo
1m 38.43s: opened dvd


DVDFab 8.1.3.6 (2011/12/02 11:32:28)

0m 00.46s: Qt Translator file load success
0m 00.49s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 24.94s: detected dvd
0m 24.97s: drive E
0m 24.97s: dvd type 1
0m 24.97s: volume label SMURFS
0m 25.13s: got copyright 1 fe
0m 25.80s: got udf/iso
0m 28.29s: got discinfo
0m 28.95s: pathplayer enabled
1m 31.80s: read error: 0 -34618250 1956302949 3270796 5872379 173341224 3270796
1m 43.64s: got dvdinfo
1m 43.64s: opened dvd
2m 24.61s: read error: 3 3270796 3338131 3276368 0 5 3058347

[PWANJO]

Good Morning. I clicked on RETRY a couple of times but Read Error still showed, However when I clicked on ABORT it continued to Read the Smirfs disc for a few seconds & then LOADED. DFDFAB 8.1.6.3 then worked fine & I got my backup for the kids to enjoy. Ma

[Metal99Raven]

@alliyance I didn't select all 3. I just used the one they selected for me. Still worked.

[signals]

You might also try exchanging the disc, the logs look like the discs may be defective.

[JRoc]

Smurfs

Smurfs opened up as stated. Thanks for the posting in the forum.

[alliyance]

I didn't chose main movie, I had Custom and there will be 3 movie on the list, take them all. That's what I did and it worked.

[Metal99Raven]

I used version 8.1.3.6 and was only able to do main movie. At first read I had to abort just once then after that no errors. DVD plays fine.

[superiorventures]

There may be different versions of this disc or possibly some bad pressings. It is working correctly for many users. I don't have the disc yet.

OK everyone. For those of you that still have NO LUCK, I have been able to do it on more then one computer using both Version. 8.1.3.5 *&* 8.1.3.6

The ONLY way I was able to get it to open though is like I said before, when you get a READ ERROR, (DO NOT CLICK ignore) CLICK abort. Once I did this it OPENED *&* went to the correct title.

It did RIP it all as MOVIE ONLY. (Make sure you have that also set.) Then I used Nero to RECODE it and have made a GOOD COPY.

NOTE: When I used the Version 8.1.3.6 it did rip faster then the other one, but again both I had to click the abort first to OPEN it ready to RIP.

Hope this helps anyone out there still having troubles.
As NORMAL DVD FAB is the GREATEST and BEST ripping software out here.