Having trouble copying Shutter Island

[CBR929]

c0afanh
What mode are you using in Fab for your burning? Also are you putting your movie in your D: drive and your blank media in your E: drive (if that is your other drives letter) for burning?
Please explain your process!!
If you are doing it the way I have asked have you tried putting your movie in your E: drive and ripping it to your Hdd and then putting your blank media in your E: drive and burning that way???
Give them a try and post back
CBR929

[c0afanh]

I am not sure how ImgBurn searches for your drives but mine is also telling me that I have a CD/DVD-ROM Device which I do not, I have 2 burners???
===============================================
Filter Driver Load Order - ImgBurn v2.5.1.0
===============================================

Upper Device Filter: [None Found]
Upper Class Filter: [None Found]
Device: CD/DVD-ROM Device
Lower Class Filter: [None Found]
Lower Device Filter: [None Found]

@ c0afanh I am going to reread this thread again will post back
CBR929

Thank you CBR929. However, I have been conducting several tests between DVDFab v7.0.7.0 (registered version) and another DVD copying program. With the issues I have previously stated in my posts with DVDFab v7.0.7.0 (registered version), it as come to my amazement that the other DVD copying program have solved my issues. I am still a big fan of DVDFab and will continue to use it. Furthermore, I have been reading other posts as well as getting help with my issues using DVDFab v7.0.7.0, and it has come to my attention that many other customers are too have all types of issues using the latest version of DVDFab. The reason why I am conducting several tests is because I want to know the reason why I am have such difficulties using the latest version of DVDFab. I so far have tried using the VSO burning engine, ImageBurn burning engine, and the Nero Burning Rom engine. So far, all three has failed. I followed every single instructions to the tee that was given to me on this forum and so far it has failed. I even want as far as uninstalling the DVDFab v7.0.7.0 and using ccleaner to make sure it was cleared out. I than re-installed DVDFab and still am experience many issues with it. Again, I am a big fan of DVDFab and will continue to use. However, I think it's time to have a major fix and come out with a fixed updated DVDFab program. I will be conducting further tests and will post them here on the forum so that it can be looked at. I just want the DVDFab program to be much better. This is another reason why I am performing tests so that the DVDFab program can not only be better, but to let you guys know what errors or issues the program is having. Please get back to be on this. Thanks....c0afanh.

[AGJ]

Well you can always go to Device manager and uninstall the DVD drive and then reboot computer to let windows install again. Then see if DVDFab can actually use it correctly. Not sure if you tried that yet

[c0afanh]

Well you can always go to Device manager and uninstall the DVD drive and then reboot computer to let windows install again. Then see if DVDFab can actually use it correctly. Not sure if you tried that yet

I will go that a try. Thanks....c0afanh.

[richmoral]

That is odd. I haven't had any problems with this program.
Just wondering what brand of media are you using?
Also what speed are you burning at?

I always burn at 4x cause I use Verbatim DVD+R and 4x is the slowest compatible speed. Oh and I use DVDFab to rip and ImgBurn on it's own to burn.

[c0afanh]

That is odd. I haven't had any problems with this program.
Just wondering what brand of media are you using?
Also what speed are you burning at?

I always burn at 4x cause I use Verbatim DVD+R and 4x is the slowest compatible speed. Oh and I use DVDFab to rip and ImgBurn on it's own to burn.

I use Verbatim DVD-R and Taiyo Yodan DVD-R media. Which are the top 2 in the market. I burn at 4x or 8x which are both compatible speeds. I too use the latest version of DVDFab to rip but I use the VSO burn engine. I tried using the ImaBurn burn engine, but it don't work. However, I will keep trying to use the ImaBurn burn engine. I am still having a lot of issues using the latest version of DVDFab. I think it's time they come out with a new fixed version of the program. There are a lot of other customers having trouble with the latest version of DVDFab. Again, I really hope they come out with a fixed version very soon. I am glad to hear that the DVDFab program is working fine for you. However, I will continue to conduct more tests as I have previously mentioned.

[c0afanh]

c0afanh
What mode are you using in Fab for your burning? Also are you putting your movie in your D: drive and your blank media in your E: drive (if that is your other drives letter) for burning?
Please explain your process!!
If you are doing it the way I have asked have you tried putting your movie in your E: drive and ripping it to your Hdd and then putting your blank media in your E: drive and burning that way???
Give them a try and post back
CBR929

My process of copying my DVD movies and burning is as follows:

I put the original DVD Movie in Drive E:, which is my Lite-On DVD-ROM/CD-RW Combo Drive.

After the copying or ripping process is complete and saved to the Hard Disk Drive, I than put a blank Verbatim DVD-R or Taiyo Yodan DVD-R media disc into Drive D:, which is my Lite-On DVD-R/+R/-RW/+RW ATAPI iHAP322 Drive (DVD Burner). Then burn the ripped movie from the Hard Disc Drive onto the blank DVD-R media using Nero 9 under nero express. Then that's it. I have been doing it this way for a long time and had never experienced any issues before until now. Do you recommended another way? Please let me know. Thanks....c0afanh.

[c0afanh]

c0afanh
What mode are you using in Fab for your burning? Also are you putting your movie in your D: drive and your blank media in your E: drive (if that is your other drives letter) for burning?
Please explain your process!!
If you are doing it the way I have asked have you tried putting your movie in your E: drive and ripping it to your Hdd and then putting your blank media in your E: drive and burning that way???
Give them a try and post back
CBR929

My process of copying my DVD movies and burning is as follows:

The mode I am using in DVDFab v7.0.7.0 is the Full Disc mode.

I put the original DVD Movie in Drive E:, which is my Lite-On DVD-ROM/CD-RW Combo Drive.

After the copying or ripping process is complete and saved to the Hard Disk Drive, I than put a blank Verbatim DVD-R or Taiyo Yodan DVD-R media disc into Drive D:, which is my Lite-On DVD-R/+R/-RW/+RW ATAPI iHAP322 Drive (DVD Burner). Then burn the ripped movie from the Hard Disc Drive onto the blank DVD-R media using Nero 9 under nero express. Then that's it. I have been doing it this way for a long time and had never experienced any issues before until now. Do you recommended another way? Please let me know. Thanks....c0afanh.

[GregiBoy]

OK, as you are ripping the DVD's to the hard drive, download and play the rip using VLC Player (It's free). To do this, navigate to the subdirectory that contains the AUDIO_TS and VIDEO_TS directories, highlight & right click on this directory see hoe the actual rip plays.

If it plays OK, then your problem is with your media/burner or Nero.

[c0afanh]

OK, as you are ripping the DVD's to the hard drive, download and play the rip using VLC Player (It's free). To do this, navigate to the subdirectory that contains the AUDIO_TS and VIDEO_TS directories, highlight & right click on this directory see hoe the actual rip plays.

If it plays OK, then your problem is with your media/burner or Nero.

I like to use PowerDVD 7 to play the ripped movie that's in my Hard Disc Drive to make sure it's a good rip. Do you think using PowerDVD 7 is good instead of VLC player? Or do I have to use VLC player to make a proper analysis of all my ripped movies that is in my Hard Disc Drive? Please let me know. Thanks....c0afanh.

[maineman]

OK, as you are ripping the DVD's to the hard drive, download and play the rip using VLC Player (It's free). To do this, navigate to the subdirectory that contains the AUDIO_TS and VIDEO_TS directories, highlight & right click on this directory see hoe the actual rip plays.

If it plays OK, then your problem is with your media/burner or Nero.

Yup, this is a huge problem with a thread of this length...it becomes difficult to follow and thus advise.

I have never seen the likes of this, the burn obviously took place and the OP was able to post part of the log, but states is unable to find any files that show any portion of the actual burn process....

My recommendation is to use Img as a standalone application.
Navigate to a movie folder,
drag it into the Source window of the Img app
and burn the movie.

Then post the burn log.
This log will be a function of Img and Img only.
And yes, we absolutely need the burn log since this is where the problem is.

Thanks for trying to post the info. Unfortunately, most of the info you posted doesn't help or is not related, ie., wrong movie, etc.,...
There is no burn log posted.
All we have is your os, Fab version and the DVD-ROM drive used to rip... certainly not burn.

Do you have PathPlayer set to always enabled?
For most users, this was the problem.

Please post the burn log
Please playback the ripped files from the hdd with a software player such as VLC.
Does the movie play ok? navigation intact?
Is the file size accurate ?

I do have the "PathPlayer" always enabled. For some strange reason, I can't find the burn log file. I did go and look at the the DVDFab log files. The only thing I do see is the dvdfab burn vso text document and the dvdfab internal text document. I did play the ripped files from my Hard Disk Drive with the PowerDVD version 6 software and it played flawlessly. It shows the very beginning of the movie to the end. And yes, the navigation is intact. I really don't know why when I burn the movie onto a blank DVD-R disc and play it on my DVD player, it skips the very beginning and goes straight into the middle of the movie. I also did check all other settings in the DVDFab v7.0.7.0 program and they are also intact and set correctly. I also resetted the DMA (Direct Memory Access) for my DVD burner just in case. Other than that, I really don't know what else to do. Please help. Thanks....c0afanh.

[maineman]

Early this morning, I burned a disc as described above...using Img as a standalone burn app. This is what it should look like:

Img.txt

[c0afanh]

Yup, this is a huge problem with a thread of this length...it becomes difficult to follow and thus advise.

I have never seen the likes of this, the burn obviously took place and the OP was able to post part of the log, but states is unable to find any files that show any portion of the actual burn process....

My recommendation is to use Img as a standalone application.
Navigate to a movie folder,
drag it into the Source window of the Img app
and burn the movie.

Then post the burn log.
This log will be a function of Img and Img only.
And yes, we absolutely need the burn log since this is where the problem is.

Okay. I did as you told me to do. I used ImgBurn as a standalone application and now posting the ImgBurn Log. Here goes the ImgBurn log you requested to see. Let me know if you find something out of the place. Thanks....c0afanh.

I 09:27:03 ImgBurn Version 2.5.1.0 started!
I 09:27:03 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)
I 09:27:03 Total Physical Memory: 3,669,488 KB - Available: 3,020,800 KB
I 09:27:03 Initialising SPTI...
I 09:27:03 Searching for SCSI / ATAPI devices...
I 09:27:03 -> Drive 1 - Info: ATAPI iHAP322 8 UL19 (E (ATA)
I 09:27:03 -> Drive 2 - Info: LITE-ON COMBO SOHC-5236V R$0G (D (ATA)
I 09:27:03 Found 1 DVD-ROM/CD-RW and 1 DVD±RW/RAM!
I 09:29:41 Operation Started!
I 09:29:41 Building Image Tree...
I 09:29:41 Checking Directory Depth...
I 09:29:41 Calculating Totals...
I 09:29:41 Preparing Image...
I 09:29:41 Checking Path Length...
I 09:29:41 Contents: 44 Files, 2 Folders
I 09:29:41 Content Type: DVD Video
I 09:29:41 Data Type: MODE1/2048
I 09:29:41 File System(s): ISO9660, UDF (1.02)
I 09:29:41 Volume Label: [Not Configured]
I 09:29:41 IFO/BUP 32K Padding: Enabled
I 09:29:41 Region Code: 1, 2, 3, 4, 5, 6, 7, 8
I 09:29:41 TV System: NTSC
I 09:29:41 Size: 4,509,247,488 bytes
I 09:29:41 Sectors: 2,201,781
I 09:29:41 Image Size: 4,510,121,984 bytes
I 09:29:41 Image Sectors: 2,202,208
I 09:29:41 Operation Successfully Completed! - Duration: 00:00:00
I 09:59:52 Operation Started!
I 09:59:52 Building Image Tree...
I 10:00:15 Checking Directory Depth...
I 10:00:15 Calculating Totals...
I 10:00:15 Preparing Image...
I 10:00:15 Checking Path Length...
I 10:00:15 Contents: 44 Files, 2 Folders
I 10:00:15 Content Type: DVD Video
I 10:00:15 Data Type: MODE1/2048
I 10:00:15 File System(s): ISO9660, UDF (1.02)
I 10:00:15 Volume Label: SHUTTER ISLAND (2010 Color R 137 Mins. Wide Screen)
I 10:00:15 IFO/BUP 32K Padding: Enabled
I 10:00:15 Region Code: 1, 2, 3, 4, 5, 6, 7, 8
I 10:00:15 TV System: NTSC
I 10:00:15 Size: 4,509,247,488 bytes
I 10:00:15 Sectors: 2,201,781
I 10:00:15 Image Size: 4,510,089,216 bytes
I 10:00:15 Image Sectors: 2,202,192
I 10:00:19 Operation Successfully Completed! - Duration: 00:00:26
I 10:00:19 Operation Started!
I 10:00:19 Source File: -==/\/[BUILD IMAGE]\/\==-
I 10:00:19 Source File Sectors: 2,202,192 (MODE1/2048)
I 10:00:19 Source File Size: 4,510,089,216 bytes
I 10:00:19 Source File Volume Identifier: SHUTTER ISLAND (2010 Color R 137 Mins. Wide Screen)
I 10:00:19 Source File Application Identifier: IMGBURN V2.5.1.0 - THE ULTIMATE IMAGE BURNER!
I 10:00:19 Source File Implementation Identifier: ImgBurn
I 10:00:19 Source File File System(s): ISO9660, UDF (1.02)
I 10:00:19 Destination Device: [1:1:0] ATAPI iHAP322 8 UL19 (E (ATA)
I 10:00:19 Destination Media Type: DVD-R (Disc ID: CMC MAG. AE1) (Speeds: 4x, 6x, 8x)
I 10:00:19 Destination Media Sectors: 2,297,888
I 10:00:19 Write Mode: DVD
I 10:00:19 Write Type: DAO
I 10:00:19 Write Speed: MAX
I 10:00:19 Link Size: Auto
I 10:00:19 Lock Volume: Yes
I 10:00:19 Test Mode: No
I 10:00:19 OPC: No
I 10:00:19 BURN-Proof: Enabled
I 10:00:20 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x)
I 10:00:20 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes
I 10:00:20 Filling Buffer... (40 MB)
I 10:00:21 Writing LeadIn...
I 10:00:52 Writing Session 1 of 1... (1 Track, LBA: 0 - 2202191)
I 10:00:52 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2202191)
I 10:08:46 Synchronising Cache...
I 10:09:04 Exporting Graph Data...
I 10:09:04 Graph Data File: C:\Documents and Settings\EN-C2\Application Data\ImgBurn\Graph Data Files\ATAPI_iHAP322_8_UL19_TUESDAY-JUNE-22-2010_10-00_AM_CMC_MAG._AE1_MAX.ibg
I 10:09:04 Export Successfully Completed!
I 10:09:04 Operation Successfully Completed! - Duration: 00:08:44
I 10:09:04 Average Write Rate: 9,311 KB/s (6.7x) - Maximum Write Rate: 11,237 KB/s (8.1x)
I 10:09:04 Cycling Tray before Verify...
W 10:09:11 Waiting for device to become ready...
I 10:09:25 Device Ready!
I 10:09:28 Operation Started!
I 10:09:28 Source Device: [1:1:0] ATAPI iHAP322 8 UL19 (E (ATA)
I 10:09:28 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: CMC MAG. AE1) (Speeds: 4x, 6x, 8x)
I 10:09:28 Image File: -==/\/[BUILD IMAGE]\/\==-
I 10:09:28 Image File Sectors: 2,202,192 (MODE1/2048)
I 10:09:28 Image File Size: 4,510,089,216 bytes
I 10:09:28 Image File Volume Identifier: SHUTTER ISLAND (2010 Color R 137 Mins. Wide Screen)
I 10:09:28 Image File Application Identifier: IMGBURN V2.5.1.0 - THE ULTIMATE IMAGE BURNER!
I 10:09:28 Image File Implementation Identifier: ImgBurn
I 10:09:28 Image File File System(s): ISO9660, UDF (1.02)
I 10:09:28 Read Speed (Data/Audio): MAX / MAX
I 10:09:28 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2202191)
I 10:09:28 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2202191)
I 10:14:17 Exporting Graph Data...
I 10:14:17 Graph Data File: C:\Documents and Settings\EN-C2\Application Data\ImgBurn\Graph Data Files\ATAPI_iHAP322_8_UL19_TUESDAY-JUNE-22-2010_10-00_AM_CMC_MAG._AE1_MAX.ibg
I 10:14:17 Export Successfully Completed!
I 10:14:17 Operation Successfully Completed! - Duration: 00:04:49
I 10:14:17 Average Verify Rate: 15,240 KB/s (11.0x) - Maximum Verify Rate: 22,099 KB/s (16.0x)

[maineman]

Thanks for the burn log. It's helpful.
Now if we can get one within Fab, either VSO or Img or preferably both, then we can isolate the burn error.

Anyway,

Your media code CMC MAG. AE1 has more than one type of disc and are as different as night and day when archiving video dvds.
Bottom line, you never know what you're going to get re: quality.
Most of us give CMC a very wide berth.

Please pick up some Verbatim or Taiyo Yuden media. You can find verbs online and in many brick & mortar stores whereas the TY's are available only online.

I am aware that you have had success with this media and with other software and this media, nevertheless, please switch your blank media.

Does this new bkup you just created play ok in your standalone player?

You also may benefit from reducing your burn speed to 4X with this media and give it another shot with Fab using Img as the default burn engine.

Let us know how both these discs play.
The one you just did and the one I just suggested.

Thanks for perservering with this stuff.
Hang in there, we'll get this sorted !

[c0afanh]

Thanks for the burn log. It's helpful.
Now if we can get one within Fab, either VSO or Img or preferably both, then we can isolate the burn error.

Anyway,

Your media code CMC MAG. AE1 has more than one type of disc and are as different as night and day when archiving video dvds.
Bottom line, you never know what you're going to get re: quality.
Most of us give CMC a very wide berth.

Please pick up some Verbatim or Taiyo Yuden media. You can find verbs online and in many brick & mortar stores whereas the TY's are available only online.

I am aware that you have had success with this media and with other software and this media, nevertheless, please switch your blank media.

Does this new bkup you just created play ok in your standalone player?

You also may benefit from reducing your burn speed to 4X with this media and give it another shot with Fab using Img as the default burn engine.

Let us know how both these discs play.
The one you just did and the one I just suggested.

Thanks for perservering with this stuff.
Hang in there, we'll get this sorted !

Thanks for getting back to me as fast as you did. The media I used was made by CMC Magnetics Corp., according to this Disc ID: CMC MAG. AE1 and it was only for a test, in which it failed in my standalone DVD player (the movie I burned with ImgBurn was Shutter Island). I do have Verbatim DVD-R and Taiyo Yuden DVD-R medias. However, when I inserted the same disc into two other standalone DVD players, they worked flawlessly. The quality of the movie was crystal clear, sharp, or perfect. I also put the same disc into two other laptops which both having PowerDVD 7 installed in them and the movie played perfect. No skips, no thing. It played perfect. On the other hand, when I inserted the same disc back into my standalone DVD player, it skipped to the middle of the movie. I am really confused now because I have put 6 other DVD movies that I backed up with DVDFab in my standalone DVD player, and they work perfectly. No skipping, and yes, the picture of the movie is crystal clear. Again, I am really confused. Please tell me what you think about this. Also, I am going to try what you suggested in the post you written to me. I will be doing the same test as mentioned in this message, but this time I will be using a Taiyo Yuden DVD-R blank media. After completion, I will notify you of the results. Thanks....c0afanh.

Here is the DVD media information made possible by a program I am using called DVD identifier. Also, when burning a DVD movie onto a DVD-R blank media, do I have to set the book type in ImgBurn before burning it? Please let me know. Thanks again....c0afanh.

----------------------------------------------------------------------------
Unique Disc Identifier : [DVD-R:CMC MAG. AE1]
----------------------------------------------------------------------------
Disc & Book Type : [DVD-R] - [DVD-R]
Manufacturer Name : [CMC Magnetics Corp.]
Manufacturer ID : [CMC MAG. AE1]
Blank Disc Capacity : [2,298,496 Sectors = 4.71 GB (4.38 GiB)]
----------------------------------------------------------------------------