I've been a user for over 4 years -- and this is one the few movies I've had problems making a back up copy.... Can anyone help ?? I haven't changed any settings, (always used default settings) and I am using DVDFab 8.0.3.2 & also downloaded DVDFab Passkey 7 and still no luck !!! -- The program has a "Reading/Writing Error" at the Copying VTS_01_1.VOB about 3 minutes into the read process.. 9.83% I've tried cleaning and even a second DVD. Still no luck .... I'm lost..... Thanks for whatever advice you can give .
-
-
Chipster_82
Is this error during the copy stage to the temp folder???
If so you can copy it to your hard drive, choose to ignore all errors, and then view it with VLC or MPC to see if it has any artifact or freezing before burning
CBR929Even if it's a little thing, do something for those who have need of help, something for which you get no pay but the privilege of doing it.
Setting Up ImgBurn and DVDFab to work together
Tips for Posting DVDFab Logs in the Forum -
OK I'll try... I chose ignore all errors and it continued copying to the hard drive -- but how do I view it with VLC or MPC ?? I don't know what those are or how to get to them !! It's continuing to copy but moving very slow.... ThanksComment
-
Chipster_82
They are media players that will play all most any media file and they do not need any additional codes,you can find VLC here and MPC here . If you still have troubles give my friend maineman thread a read through
If you could before burning to disc post your logs to make sure that your drive is in the right mode the default location is:
For Win7 C:\Users\User Name\My Documents\DVDFab\Log
or Vista C:\Users\User Name\Documents\DVDFab\Log
or for XP C:\Documents and Settings\User Name\My Documents\DVDFab\Log
Please just attach your most resent log(s) and post right here.
CBR929Even if it's a little thing, do something for those who have need of help, something for which you get no pay but the privilege of doing it.
Setting Up ImgBurn and DVDFab to work together
Tips for Posting DVDFab Logs in the ForumComment
-
Thank you -- as soon as the program copies it to my hard drive I will post the log... the program never ran this slow 0.35 MB/s 25% complete 27 minutes.... very slow!!! I usually have the backup copy made by now. Thanks.Comment
-
I am thinking that your drive may be in PIO modeOriginally posted by Chipster_82 View Post
There is nothing you can do while you are coping unless you cancel your current process, check your drives mode, and if it is in PIO mode you will have to reset it to DMA mode, and then start again.
CBR929Even if it's a little thing, do something for those who have need of help, something for which you get no pay but the privilege of doing it.
Setting Up ImgBurn and DVDFab to work together
Tips for Posting DVDFab Logs in the ForumComment
-
DVDFab 8.0.3.2 (2010/11/02 14:28:10)
0m 02.69s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 file2mobile 1 filemover 1
1m 07.23s: detected dvd
1m 07.25s: drive E
1m 07.25s: dvd type 1
1m 07.25s: volume label PUSH
1m 07.34s: detected dvd
1m 07.37s: drive E
1m 07.37s: dvd type 1
1m 07.37s: volume label PUSH
1m 07.62s: got copyright 1 fe
1m 07.93s: got udf/iso
1m 08.84s: got discinfo
1m 08.84s: pathplayer enabled
1m 21.01s: got dvdinfo
60m 41.50s: detected dvd
60m 41.50s: drive E
60m 41.50s: dvd type 0
60m 41.50s: volume label
135m 28.72s: detected dvd
135m 28.77s: drive E
135m 28.79s: dvd type 1
135m 28.79s: volume label PUSH
135m 28.82s: got copyright 0 0
135m 29.93s: got udf/iso
135m 31.27s: got discinfo
135m 31.27s: pathplayer enabled
135m 50.36s: got dvdinfo
167m 05.73s: detected dvd
167m 05.77s: drive E
167m 05.77s: dvd type 1
167m 05.77s: volume label NECROMENTIA
167m 05.88s: got copyright 1 fe
167m 07.16s: got udf/iso
167m 12.15s: got discinfo
167m 12.15s: pathplayer enabled
167m 38.64s: got dvdinfo
181m 48.58s: detected dvd
181m 48.66s: drive E
181m 48.66s: dvd type 1
181m 48.66s: volume label TOY_STORY_3
181m 48.83s: got copyright 1 fe
181m 49.44s: got udf/iso
181m 58.99s: got discinfo
181m 59.27s: pathplayer enabled
183m 26.83s: got dvdinfo
204m 53.01s: detected dvd
204m 53.03s: drive E
204m 53.05s: dvd type 0
204m 53.05s: volume label
216m 51.59s: detected dvd
216m 51.63s: drive E
216m 51.63s: dvd type 1
216m 51.63s: volume label NECROMENTIA
216m 51.76s: got copyright 1 fe
216m 53.16s: got udf/iso
216m 57.12s: got discinfo
216m 57.14s: pathplayer enabled
217m 18.45s: got dvdinfoLast edited by Chipster_82; 11-03-2010, 01:27 AM.Comment
-
Is this all you need ?? Can I burn the copy now ??Comment
-
Chipster_82
I need to look at any recent burn logs with a completed burn.Even if it's a little thing, do something for those who have need of help, something for which you get no pay but the privilege of doing it.
Setting Up ImgBurn and DVDFab to work together
Tips for Posting DVDFab Logs in the ForumComment
-
2010-11-01 18:57:28 ---- ******************** Log session stop 01-Nov 18:57:28.716 PID 7064********************
2010-11-01 18:53:26 Info WRITE SUCCESS: Disc written
2010-11-01 18:53:26 Info Finalization Time 00:00:31 - Total completion time 00:08:13
2010-11-01 18:52:55 Info Write finished in 00:07:41 - Finalization start here. Avg. burn rate 7.75
2010-11-01 18:45:31 Info Lead-in burning time (mS) 18506
2010-11-01 18:45:13 Info Write started 2201680 sectors to write
2010-11-01 18:45:13 Info Init success: DVD+R
2010-11-01 18:45:13 Info Writing speed requested x8.0, effective x8.0
2010-11-01 18:45:13 Info Available write speed: 16x ,12x ,8x ,6x ,4x
2010-11-01 18:45:13 Info Media ID: CMC MAG-M01-00
2010-11-01 18:45:13 Info Media type: DVD+R
2010-11-01 18:45:12 Info Scanned files #77, folder #2 - total size 4507781120 b. (4.2 Gb.)
2010-11-01 18:45:12 Info Inserted media type : DVD+R
2010-11-01 18:45:12 Info Write started
2010-11-01 18:45:08 Info Writable disc DVD+R inserted. Ready to write
2010-11-01 18:40:23 Info Disc () not emtpy.
2010-11-01 18:25:59 Info Disc (DVD-ROM) not emtpy.
2010-11-01 18:21:48 Info Disc (DVD-ROM) not emtpy.
2010-11-01 18:21:40 Info Parsing disc ...
2010-11-01 18:19:43 Info WRITE SUCCESS: Disc written
2010-11-01 18:19:43 Info Finalization Time 00:00:31 - Total completion time 00:08:13
2010-11-01 18:19:11 Info Write finished in 00:07:41 - Finalization start here. Avg. burn rate 7.75
2010-11-01 18:11:48 Info Lead-in burning time (mS) 18405
2010-11-01 18:11:29 Info Write started 2202288 sectors to write
2010-11-01 18:11:29 Info Init success: DVD+R
2010-11-01 18:11:29 Info Writing speed requested x8.0, effective x8.0
2010-11-01 18:11:29 Info Available write speed: 16x ,12x ,8x ,6x ,4x
2010-11-01 18:11:29 Info Media ID: CMC MAG-M01-00
2010-11-01 18:11:29 Info Media type: DVD+R
2010-11-01 18:11:29 Info Scanned files #25, folder #2 - total size 4509136896 b. (4.2 Gb.)
2010-11-01 18:11:29 Info Inserted media type : DVD+R
2010-11-01 18:11:29 Info Write started
2010-11-01 18:11:25 Info Writable disc DVD+R inserted. Ready to write
2010-11-01 18:09:53 Info Disc () not emtpy.
2010-11-01 17:52:54 Info Disc (DVD-ROM) not emtpy.
2010-11-01 17:51:37 Info Disc (DVD-ROM) not emtpy.
2010-11-01 17:51:00 Info Disc ejected by user.
2010-11-01 17:45:27 Info Disc (DVD-ROM) not emtpy.
2010-11-01 17:38:33 Info Disc (DVD-ROM) not emtpy.
2010-11-01 17:38:31 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
2010-11-01 17:38:30 Info Drive has Serial ATA physical interface
2010-11-01 17:38:30 Info New Drive selected : 2:1:0 - TSSTcorp CDDVDW TS-H653Z 4403 [E] (Scsi)
2010-11-01 17:36:13 Info Current Drive selected : 2:1:0 - TSSTcorp CDDVDW TS-H653Z 4403 [E] (Scsi)
2010-11-01 17:36:13 Info Using Advanced SPTI interface
2010-11-01 17:36:13 Info System default language : English (United States)
2010-11-01 17:36:13 Info User default language : English (United States)
2010-11-01 17:36:13 Info DLL Version : 4.0.11.473
2010-11-01 17:36:13 Info DLL : C:\Program Files\DVDFab 8\vso_hwe.dll
2010-11-01 17:36:13 Info Version : 8, 0, 3, 2
2010-11-01 17:36:13 Info ExeName : C:\Program Files\DVDFab 8\DVDFab.exe
2010-11-01 17:36:13 Info OS : Microsoft Windows Vista Home Premium (Build 6002: Service Pack 2)
2010-11-01 17:36:13 ---- ******************** Log session start 01-Nov 17:36:13.021 PID 7064********************Comment
-
Chipster_82
I do not think you are in PIO mode as you would never be able to burn at these speeds. To make sure Open Fab Click the Green √ top right > General > make sure Check for DMA Automatically is Checked and also Click the Reset DMA to the right click OK and restart Fab.
2010-11-01 18:11:29 Info Media ID: CMC MAG-M01-00
I would also consider using better media to burn with either Taiyo Yuden or Verbatim discs the ones you are using are considered garbage, sorry
Can you also explain this 181m 48.66s: volume label TOY_STORY_3_RENTAL
If this is a rental please read this
CBR929
Even if it's a little thing, do something for those who have need of help, something for which you get no pay but the privilege of doing it.
Setting Up ImgBurn and DVDFab to work together
Tips for Posting DVDFab Logs in the ForumComment
-
I'm using HP DVD's (OK, I'll take your advice) but the program never ran this slow before I told it "to ignore all errors" .... Thanks again !! Toy Story 3 was purchased at Wal-Mart.....Comment
-
Chipster_82
Make sure to do this Open Fab Click the Green √ top right > General > make sure Check for DMA Automatically is Checked and also Click the Reset DMA to the right click OK and restart Fab.
You had read errors and after 6 CRC errors you drive will revert to PIO mode, your logs did not show it but you said you were getting errors.
So to be safe reset your DMA and you can also view the movie if you installed one of the other players I suggested to make sure it plays fine and then burn it, or burn it now it is up to you.
Glad it ripped for you
CBR929Even if it's a little thing, do something for those who have need of help, something for which you get no pay but the privilege of doing it.
Setting Up ImgBurn and DVDFab to work together
Tips for Posting DVDFab Logs in the ForumComment
Comment