Disney Pixar Up

[svatch]

2 Thumbs 'UP' with the tip!

DVDFab 6.2.0.5 can do this movie Full DVD with pathplayer always enabled

Thanks, this tip works great and no more error message!
DVDfab has been a great tool when it comes to backing up the collection.

[AGJ]

I am trying to rip UP with Full disk/pathplayer enabled like suggested above. I am still getting the same result where there are portions at the begining of the movie that skip ahead and don't play correctly. I am using the trial version...will the full version make a difference? Is anyone else still seeing this issue with version 6.2.0.5?

The 30 day trial has all the same features as the paid version. Have you tried watching the original DVD in your DVD player to see if you get same problem with it? Also try lowering the burn speed to 4x and not burn at max speed as that could be what is wrong. Use only Verbatim or Taiyo Yuden blank media for best results as well

[triggerx]

When I rip Up, it seems to work fine and the folder on the hard drive where it is stored indiacted 5.27GB of space. When I try to burn to disc however, it only wants to burn 584MB which I know is not right.

I'm getting the exact same behavior. Hopefully it will be fixed in a future build without having do anything tricky.... they work pretty hard at ironing out issues like this.

[chief]

chief I just ripped UP with Full disk/pathplayer enabled like suggested above and its all fine no problems and all is well i think the trial version is for showing you it works in general but not on all i am not saying this is a fact but my opinion so if you are haveing problems with the trial version then just buy it i mean come on are you that broke. once again paid version here and never any problems!! and i have 6.2.0.5

[W&B]

The trial is fully functional for 30 days. The problem people are having with "UP" could be a bad original disc and/or Fab's configuration settings. As many others have said before Pathplayer must be enabled with that title.
btw welcome to the forum

[triggerx]

The trial is fully functional for 30 days. The problem people are having with "UP" could be a bad original disc and/or Fab's configuration settings. As many others have said before Pathplayer must be enabled with that title.
btw welcome to the forum

OR... they are using the other version of this disc... keep in mind, there are two versions of this disc.

[big_moviefreak]

I just got through backing up my dvd copy of UP which is the 4 disc version which includes the blu-ray,dvd, digital copy and blu-ray special features. With pathfinder set to always enabled backed up entire disc just fine main movie was title 31. I did find a bug when ever you use the same folder as your source does not show the correct size and all the titles are the wrong length as far as time does not see title 31. Need Signals, Gregiboy, and Wild and Blue to try so they can see what I'm talking about. This needs to be reported to Fengtao so it can be fixed in the release.

[AGJ]

OR... they are using the other version of this disc... keep in mind, there are two versions of this disc.

Actually 3 versions of this disc was released. A Single disc DVD, A 2 disc Blu-ray with DVD and then a single disc DVD with out a menu

[larry2756]

The new Beta 6.2.1.5 will copy this movie.

[jimmymovie]

I read the thread and tried several times without any success. DVDFab (6.2.1.8 Released on Dec/31/2009 is the last version I tired) still says the writing failed (I think if I ever do it again I would ignore the error and continue buring) so I stopped there. However I found that Shrink can pick the dir that DVDFab created on "My Documents -> DVDFab ->Temp->FullDisc->...") and play it correctly within Shrink. But when I "Backup" the Disc does not play with the correct sequence. Then I read Shrink manuals and us "Reauthor" button to open the folder DVDFab created and see that only title 50 has the main movie. I dragged it to the left side of the sceen and "Backup" and that did it!
Have fun!

[lpfdude]

I was finally able to get DVDfab 6.2.1.8 to see UP with Pathplaer enabled. Unfortunately, after 3 1/2 hours after the "Analyzing of DVD started" I got the error of "Task_1 failed! Error=401" then "Process Failed!" Does anyone have any ideas?

[AGJ]

DVDFab can do this movie must be bad pressed disc exchange it for another

[wcgreen3]

Closed captions

Agreed, just a comment on this version of the disc. I just by chance was able to view this disc (NOT COPYING) and I have to say its a all time low for Disney/Pixar. Apparently they are discriminating against the hearing impaired as that disc also does not contain close captions or any sub titles what so ever. This is a sad sad thing for kids who may be hearing impaired and familys can't afford to purchase a disc and merely wanted to rent it to watch.

I spent better part of a day trying to copy and by following the advice of several posters, was finally able to burn a working copy using ver 6.1.1.0. Disabling pathplayer and selecting "Ignore all read errors" was the key for me. When I first played the original disk, it was displayed as Title 31 so that was what I copied.

When I viewed the copy, it displayed the closed captions which I had to turn off. So.... the disk does contain closed captions or, at least, mine did. In fact, I was a bit concerned that I could not turn them off as they can be a distraction and was glad when I found the setting on my DVD player to turn them off.

I did not watch the copy in real time but instead fast forwarded through it and it appeared to be okay.

So thanks to all of you posters for enabling me to accomplish this without a substantial quantity of hair loss.

[Dream Kat]

DVDFab v6.2.1.8 (unregistered version) no longer works (with or without PathPlayer) for the Disney Pixar DVD "Up" (2009). With PathPlayer, the message "To open this DVD disc, you need buy or renew DVDFab 'DVD to DVD', or you can wait for new version of DVDFab HD Decrypter" is displayed. Without PathPlayer, the disc size reported is incorrectly reported as 70.491GB, and as one would expect attempting to run it malfunctions with Transfer Rate not displayed, Task Time Left always 00:00:00, and after a lengthy time the message "Process Failed!" is displayed.

DVDFab v6.2.0.5 works correctly when the Source is the DVD disc and the Target is a hard disk folder. However, running DVDFab v6.2.0.5 subsequently with the Source being that previous resulting Target hard disk folder, results in the message "To open this DVD disc, you need buy or renew DVDFab 'DVD to DVD', or you can wait for new version of DVDFab HD Decrypter" is displayed.

Log files from each version are attached (with some consolidated lines for brevity):

--------------------------- DVDFab v6.2.0.5 ----------------------------

--- v6.2.0.5 Info Screen ---

Info for drive [D:\] (DVDFab 6.2.0.5)
Drive region: 1

Disc type: Video DVD
Disc region: 1
Volume name: UP
Video standard: NTSC
Layer 0 size: 2040880 sectors (3986 MBytes)
Layer 1 size: 2040880 sectors (3986 MBytes)

CSS (Content Scramble System) protection is removed!
RC (Region Code) protection is removed!
RCE (Region Code Enhancement) protection is removed!
APS (Analog Protection System) protection is removed!
UOPs (User Operation Prohibitions) protection is removed!

Invalid PTTs protection is removed!
Invalid PGCIs protection is not found.
Invalid PGCs protection is not found.
Invalid TMAPs protection is not found.
Invalid CELLs protection is removed!
Invalid VOBUs protection is removed!
Fake vts 2-9,12-17,19-22 is removed!
18 fake vts protections are removed!
Potential bad sector (vts:18 title begin:0 end:2687) is removed!
Potential bad sector (vts:18 title begin:2720 end:4111) is removed!
Potential bad sector (vts:23 title begin:0 end:23035) is removed!
3 potential bad sector protections are removed!
Structure protection (ARccOS, RipGuard, etc.) is removed!

PathPlayer is enabled!
Unplayable cell (vts:18 title pgc:1 cell:1-163) is removed!
Unplayable cell (vts:18 title pgc:2 cell:2-6) is removed!
Unplayable cell (vts:18 title pgc:3 cell:1-163) is removed!
Unplayable cell (vts:18 title pgc:4 cell:1-161) is removed!
Unplayable cell (vts:18 title pgc:5 cell:3-6) is removed!
Unplayable cell (vts:18 title pgc:6 cell:1) is removed!
Unplayable cell (vts:18 title pgc:7 cell:1) is removed!
Unplayable cell (vts:23 title pgc:2 cell:1) is removed!
Unplayable cell (vts:26 title pgc:2 cell:1) is removed!
Unplayable cell (vts:26 title pgc:5 cell:1) is removed!
501 unplayable cells are removed!

--- v6.2.0.5 Process Log ---

13:49:11: You are going to try "DVD to DVD" option.
13:49:11: Analyzing of DVD started
13:49:12: Analyzing of DVD completed successfully
13:49:12: Copy process started
14:23:33: Copy process completed successfully
14:23:34: Process completed successfully!

--- v6.2.0.5 Internal Log ---

DVDFab 6.2.1.8 (2010/01/14 11:44:50)

0m 01.93s: option dvd2dvd 0 dvd2mobile 0 bluray2bluray 1 file2mobile 1 filemover 1
0m 06.13s: detected dvd
0m 06.17s: drive D
0m 06.17s: video dvd 1
0m 06.17s: volume label UP
0m 06.30s: detected dvd
0m 06.33s: drive D
0m 06.33s: video dvd 1
0m 06.33s: volume label UP
0m 06.50s: got copyright 1 fe
0m 06.95s: got udf/iso
0m 14.58s: got discinfo

--- v6.2.0.5 Burn VSO Log ---

2010-01-14 13:46:53 ---- ******************** Log session stop 14-Jan 13:46:53.169 PID 3864********************
2010-01-14 13:44:43 Info Disc (DVD-ROM) not emtpy.
2010-01-14 13:44:41 Info Compatible media types : DVD-R, DVD-RW Seq., DVD-RW RO, DVDRAM, DVD+R, DVD+RW, CD-R, CD-RW, DL DVD+R, DL DVD-R
2010-01-14 13:44:41 Info Drive has Serial ATA physical interface
2010-01-14 13:44:41 Info New Drive selected : 0:1:0 - MATSHITA DVD-RAM UJ880AS 1.50 [D] (Ide)
2010-01-14 13:42:01 Info Current Drive selected : 0:1:0 - MATSHITA DVD-RAM UJ880AS 1.50 [D] (Ide)
2010-01-14 13:42:01 Info Using Advanced SPTI interface
2010-01-14 13:42:01 Info System default language : English (United States)
2010-01-14 13:42:01 Info User default language : English (United States)
2010-01-14 13:42:01 Info DLL Version : 4.0.5.464
2010-01-14 13:42:01 Info DLL : C:\Program Files\DVDFab 6\vso_hwe.dll
2010-01-14 13:42:01 Info Version : 6, 2, 0, 5
2010-01-14 13:42:01 Info ExeName : C:\Program Files\DVDFab 6\DVDFab.exe
2010-01-14 13:42:01 Info OS : Microsoft Windows Vista Home Basic (Build 6002: Service Pack 2)
2010-01-14 13:42:01 ---- ******************** Log session start 14-Jan 13:42:01.660 PID 3864********************

----------------- DVDFab v6.2.1.8 (Without PathPlayer) -----------------

--- v6.2.1.8 Info Screen ---

Drive region: 1

Disc type: Video DVD
Disc region: 1
Volume name: UP
Video standard: NTSC
Layer 0 size: 2040880 sectors (3986 MBytes)
Layer 1 size: 2040880 sectors (3986 MBytes)

CSS (Content Scramble System) protection is removed!
RC (Region Code) protection is removed!
RCE (Region Code Enhancement) protection is removed!
APS (Analog Protection System) protection is removed!
UOPs (User Operation Prohibitions) protection is removed!

Invalid PTTs protection is removed!
Invalid PGCIs protection is not found.
Invalid PGCs protection is not found.
Invalid TMAPs protection is not found.
Invalid CELLs protection is removed!
Invalid VOBUs protection is removed!
Fake vts protection is not found!
Potential bad sector (vts:9 title begin:0 end:195) is removed!
Potential bad sector (vts:12 title begin:0 end:2687) is removed!
Potential bad sector (vts:12 title begin:3110362 end:3171402) is removed!
Potential bad sector (vts:13 title begin:0 end:2687) is removed!
Potential bad sector (vts:13 title begin:3110362 end:3171402) is removed!
Potential bad sector (vts:14 title begin:0 end:2687) is removed!
Potential bad sector (vts:14 title begin:3110362 end:3171402) is removed!
Potential bad sector (vts:15 title begin:0 end:2687) is removed!
Potential bad sector (vts:15 title begin:3110362 end:3171402) is removed!
Potential bad sector (vts:16 title begin:0 end:2687) is removed!
Potential bad sector (vts:16 title begin:3110362 end:3171402) is removed!
Potential bad sector (vts:17 title begin:0 end:2687) is removed!
Potential bad sector (vts:17 title begin:3110362 end:3171402) is removed!
Potential bad sector (vts:18 title begin:0 end:2687) is removed!
Potential bad sector (vts:19 title begin:0 end:2687) is removed!
Potential bad sector (vts:19 title begin:3110362 end:3171402) is removed!
Potential bad sector (vts:20 title begin:0 end:2687) is removed!
Potential bad sector (vts:20 title begin:3110362 end:3171402) is removed!
Potential bad sector (vts:21 title begin:0 end:2687) is removed!
Potential bad sector (vts:21 title begin:3110362 end:3171402) is removed!
Potential bad sector (vts:22 title begin:0 end:2687) is removed!
Potential bad sector (vts:22 title begin:3110362 end:3171402) is removed!
Potential bad sector (vts:23 title begin:0 end:23035) is removed!
23 potential bad sector protections are removed!
Structure protection (ARccOS, RipGuard, etc.) is removed!

PathPlayer is disabled.

--- v6.2.1.8 Process Log ---

16:41:46: You are going to try "DVD to DVD" option.
16:41:50: Analyzing of DVD started
17:28:45: Task_1 failed! Error=401

--- v6.2.1.8 Internal Log ---

DVDFab 6.2.1.8 (2010/01/15 16:34:49)

0m 00.26s: option dvd2dvd 0 dvd2mobile 0 bluray2bluray 1 file2mobile 1 filemover 1
0m 04.64s: detected dvd
0m 04.69s: drive D
0m 04.69s: video dvd 1
0m 04.69s: volume label UP
0m 04.85s: detected dvd
0m 04.91s: drive D
0m 04.91s: video dvd 1
0m 04.91s: volume label UP
0m 05.17s: got copyright 1 fe
0m 06.10s: got udf/iso
0m 15.50s: got discinfo
0m 20.10s: got dvdinfo

--- v6.2.1.8 Burn VSO Log ---

2010-01-15 16:34:12 ---- ******************** Log session stop 15-Jan 16:34:12.639 PID 7020********************
2010-01-15 16:30:09 Info Current Drive selected : 0:1:0 - MATSHITA DVD-RAM UJ880AS 1.50 [D] (Ide)
2010-01-15 16:30:09 Info Using Advanced SPTI interface
2010-01-15 16:30:09 Info System default language : English (United States)
2010-01-15 16:30:09 Info User default language : English (United States)
2010-01-15 16:30:09 Info DLL Version : 4.0.5.464
2010-01-15 16:30:09 Info DLL : C:\Program Files\DVDFab 6\vso_hwe.dll
2010-01-15 16:30:09 Info Version : 6, 2, 1, 8
2010-01-15 16:30:09 Info ExeName : C:\Program Files\DVDFab 6\DVDFab.exe
2010-01-15 16:30:09 Info OS : Microsoft Windows Vista Home Basic (Build 6002: Service Pack 2)
2010-01-15 16:30:09 ---- ******************** Log session start 15-Jan 16:30:09.261 PID 7020********************

------------------------------------------------------------------------

[GregiBoy]

That is exactly what I would expect to happen because when you are opening the folder as the source, you are using the DVD to DVD function and that trial has expired.