DVD to Mobile: A/V Sync Issues Reporting

[GregiBoy]

I have decided to start up this sticky so that A/V sync issues can be reported in a meaningful manner.

This will then give the Developers and Moderators a true picture of what the problems are, if any.

It is no good just saying "I have an A/V sync problem with Version 6.1.2.5" as A/V sync problems can be related to the procedure used, a specific disk, a specific profile or even individual settings within that profile.

Please do not report A/V sync issues unless you have first read my thread and are using either an ISO file or Hard Disk Folders as the source. The many reasons for this are explained in the above linked thread.

This is an example of the information required and the format in which to post it:-

Version: DVD Fab 6.1.2.5
Movie: Star Trek 2009
Region: 4
Disk Volume Name: STAR_TREK_XI_AU
Title Chosen to Encode: 21
Profile Used: generic.avi.xvid.audiocopy
Resolution Chosen: 720 x 400
Cropping: No Crop - Disabled
Video Bitrate: 1100
Audio Codec & Bitrate: Audiocopy passthrough
Single Pass or 2 Pass: 2 Pass
Sync shift is: Static (same throughout) or dynamic (varies during playback)
Sync error is: Small (fraction of one second) or Large (several seconds or more)
Playback Device: Samsung LA52A850 Television
Playback using VLC: Same problem

Just copy and paste the above section in to your post and replace the example data with your own.

This thread is for this data ONLY so that it can be read easily and I will delete any extraneous data, comments or posts without warning.

[GregiBoy]

Version: DVD Fab 6.1.2.5
Movie: Star Trek 2009
Region: 4
Disk Volume Name: STAR_TREK_XI_AU
Title Chosen to Encode: 21
Profile Used: generic.avi.h264.audiocopy
Resolution Chosen: 720 x 400
Cropping: No Crop - Disabled
Video Bitrate: 1100
Audio Codec & Bitrate: Audiocopy passthrough
Single Pass or 2 Pass: 2 Pass
Sync shift is: dynamic
Sync error is: Large (several seconds or more)
Playback Device: Samsung LA52A850 Television, Ziova CS615, MIDTE 358, 368 & 369 HDD Media Players
Playback using VLC: Same problem

[onneeye]

Version: DVD Fab 6.1.2.5
Movie: ID4
Region: 1
Disk Volume Name: ID4
Title Chosen to Encode: 1
Profile Used: generic.mkv.h264.acc
Resolution Chosen: 720 x 400
Cropping: No Crop - Disabled
Video Bitrate: 2070
Audio Codec & Bitrate: 128kps, dolby prologic II
Single Pass or 2 Pass: 1 Pass
Sync shift is: dynamic
Sync error is: Large (several seconds or more)
Playback Device: wdhdtv, laptop, desktop
Playback using VLC: Same problem

[KmR]

Version: DVD Fab 6.2.0.2 Beta
Movie: Fight Club
Region: 1
Disk Volume Name: FIGHTCLB
Title Chosen to Encode: 1
Profile Used: xbox360.wmv.wma10
Resolution Chosen: 848 x 358
Cropping: Auto
Video Bitrate: 2500
Audio Codec & Bitrate: 128kps, dolby prologic II
Single Pass or 2 Pass: 2 Pass
Sync shift is: progressive - OK in the begining, off by about 1+ second at the end..
Sync error is: Medium 1+ second
Playback Device: Computer / WMP 12
Playback using VLC: No audio - VLC Returns the following error:
No suitable decoder module:
VLC does not support the audio or video format "wmap". Unfortunately there is no way for you to fix this.

[KmR]

Version: DVD Fab 6.2.0.2 Beta
Movie: Fight Club
Region: 1
Disk Volume Name: FIGHTCLB
Title Chosen to Encode: 1
Profile Used: xbox360.wmv.wma10
Resolution Chosen: 848 x 358
Cropping: Auto
Video Bitrate: 2500
Audio Codec & Bitrate: 128kps, dolby prologic II
Single Pass or 2 Pass: 2 Pass
Sync shift is: progressive - OK in the begining, off by about 1+ second at the end..
Sync error is: Medium 1+ second
Playback Device: Computer / WMP 12
Playback using VLC: No audio - VLC Returns the following error:
No suitable decoder module:
VLC does not support the audio or video format "wmap". Unfortunately there is no way for you to fix this.

Didn't see any edit buttons...

In any case... Same problem with 6.2.0.5 & 5.1 Multichannel audio (forgot to use the desired audio track the first time around)

[onneeye]

Version: DVD Fab 6.1.2.5 and older version
Movie: Alien, Aliens, Alien III, and Aliens Resurrections (Alien Trilogoy Set)
Region: 1
Disk Volume Name: Alien, Aliens, Alien III, and Aliens Resurrections
Title Chosen to Encode: 1
Profile Used: generic.mkv.h264.acc, generic mkv.h264 audiocopy, generic.mp4.h264.aac.xml
Resolution Chosen: 720 x 400
Cropping: No Crop - Disabled
Video Bitrate: 2070
Audio Codec & Bitrate: 128kps, dolby prologic II
Single Pass or 2 Pass: 1 Pass
Sync shift is: dynamic
Sync error is: Large (several seconds or more)
Playback Device: wdhdtv, laptop, desktop
Playback using VLC: Same problem

[St00pidChicken]

5.1 in XBOX 360 DVD to Mobile is not correct

I am posting to this thread even though my problem is not really an A/V sync issue at the request of the original poster of this thread.

Version: DVD Fab 6.2.0.5
Movie: Any Movie
Region: 1
Disk Volume Name: Any Movie
Title Chosen to Encode: main
Profile Used: xbox360.wmv.wma10
Resolution Chosen: any
Cropping: Crop - Automatic
Video Bitrate: any, but I usually choose 5000
Audio Codec & Bitrate: WMA10 with 5.1
Single Pass or 2 Pass: doesn't matter, but I usually choose 2 Pass
Sync shift is: Static (same throughout)
Sync error is: Not really a sync error, see explanation below
Playback Device: PC with Windows 7, 360 to TV, anything that will playback the file
Playback using VLC: Same problem

Explanation of problem: I have seen other posts by people with this problem using MP4 as well. The problem is that during playback, the 5.1 audio is not in the correct channels. The audio that *should* be in the center channel is coming out of the front right channel. It's pretty obvious if you have a 5.1 discreet speaker setup and you are close to them. Out of a two channel setup on a TV that's far away it's less obvious.

Listening to the actual DVD movie playback, the audio for the center channel is correct, so it is not the source.

[onneeye]

Version: DVD Fab 6.1.2.5
Movie: Godizilla USA
Region: 1
Disk Volume Name: Godzilla
Title Chosen to Encode: 1
Profile Used: generic.mkv.h264.acc, generic mkv.h264 audiocopy, generic.mp4.h264.aac.xml
Resolution Chosen: 720 x 400 deinterlace
Cropping: No Crop - Disabled
Video Bitrate: 2588
Audio Codec & Bitrate: 128kps, dolby prologic II
Single Pass or 2 Pass: 1 Pass
Sync shift is: dynamic
Sync error is: Large (several seconds or more)
Playback Device: wdhdtv, laptop, desktop
Playback using VLC: Same problem

When I used DVDFab V5.2.5.0 to reburn the problem dvd with generic h264.audiocopy. Most of the movie don't have the audio sync problem. Something got broken in version 6. About 75 percent my problem dvds are fixed using version 5.

[think1]

Version: DVD Fab 6.1.2.5
Movie: Up
Region: 1
Disk Volume Name: UP
Title Chosen to Encode: 27(1)
Profile Used: xbox360.wmv.wma9
Resolution Chosen: 720 x 400
Cropping: No Crop - Disabled
Video Bitrate: 1381
Audio Codec & Bitrate: 128kbps
Single Pass or 2 Pass: 2 Pass
Sync shift is: Dynamic (varies during playback) - appears to increase through out movie?
Sync error is: Small in the beginning and Large towards the end
Playback Device: PC Windows Media Player and HP MediaSmart
Playback using VLC: (Downloading it now and will test it)

[Garyde]

Version: DVD Fab 6.2.0.5
Movie: Any Movie
Region: 1
Disk Volume Name: Any Movie
Title Chosen to Encode: main
Profile Used: x to MP4
Resolution Chosen: any
Cropping: Crop - Disabled
Video Bitrate: 4000
Audio Codec & Bitrate: WMA10 with 5.1
Single Pass or 2 Pass: 2 Pass
Sync shift is: Static (same throughout)
Sync error is: No Errors
Playback Device: PC with Windows 7, Any playback device
Playback using VLC: Same problem
Problem: During playback, the 5.1 audio is not in the correct channels. Selecting DolbyII "fixes".
Please give us an ETA on this fix

[KmR]

GregiBoy - Do you know if the developers are looking into this problem or not?

Looks like we've got a number of users having this problem with various profiles... It also looks like some of the problem reports go back to mid September (channel issue - ) and slightly early September (sync issues - - and then again late October - & )

[onneeye]

Version: DVD Fab 6.1.2.5
Movie: equilibrium
Region: 1
Disk Volume Name: equilibrium
Title Chosen to Encode: 1
Profile Used: generic.mkv.h264.acc, generic mkv.h264 audiocopy, generic.mp4.h264.aac.xml
Resolution Chosen: 720 x 400 deinterlace
Cropping: No Crop - Disabled
Video Bitrate: 2070
Audio Codec & Bitrate: 128kps, dolby prologic II, stereo
Single Pass or 2 Pass: 1 Pass
Sync shift is: dynamic
Sync error is: Large (several seconds or more)
Playback Device: wdhdtv, laptop, desktop
Playback using VLC: Same problem

[W&B]

Version: DVD Fab 6.2.0.2
Movie: Forrest Gump (2 disc set) Wide Screen Version
Region: 1 NTSC
Disk Volume Name: FOREST
Title Chosen to Encode: 1
Profile Used: generic.avi.divx.mp3
Resolution Chosen: 704x294
Cropping: No Crop - Disabled
Video Bitrate: 1000
Audio Codec & Bitrate: mp3 192kbps
Single Pass or 2 Pass: 2 Pass
Sync shift is: gradual and worsens as movie progresses
Sync error is: Large (several seconds or more) as movie progresses
Playback Device: Total Media Theater 3
Playback using VLC: Same Problem

[onneeye]

Version: 6.20.5
Movie: Aliens vs Predator (AVP) 1 and 2
Region: 1
Disk Volume Name: Aliens vs Predator (AVP) 1 and 2
Title Chosen to Encode: 1
Profile Used: generic.mkv.h264.acc, generic mkv.h264 audiocopy, generic.mp4.h264.aac.xml
Resolution Chosen: 720 x 400
Cropping: No Crop - Disabled
Video Bitrate: 2070
Audio Codec & Bitrate: 128kps, dolby prologic II
Single Pass or 2 Pass: 1 Pass
Sync shift is: dynamic
Sync error is: Large (several seconds or more)
Playback Device: wdhdtv, laptop, desktop
Playback using VLC: Same problem

[KmR]

Version: DVD Fab 6.2.0.2 Beta
Movie: Fight Club
Region: 1
Disk Volume Name: FIGHTCLB
Title Chosen to Encode: 1
Profile Used: xbox360.wmv.wma10
Resolution Chosen: 848 x 358
Cropping: Auto
Video Bitrate: 2500
Audio Codec & Bitrate: 128kps, dolby prologic II
Single Pass or 2 Pass: 2 Pass
Sync shift is: progressive - OK in the begining, off by about 1+ second at the end..
Sync error is: Medium 1+ second
Playback Device: Computer / WMP 12
Playback using VLC: No audio - VLC Returns the following error:
No suitable decoder module:
VLC does not support the audio or video format "wmap". Unfortunately there is no way for you to fix this.

Same problem with 6.2.1.0 Beta and 5.1 Audio...