DVD's aren't finishing

[CBR929]

Hi HartS2k
I never noticed the typo, just wanted you to copy and paste your log.
CBR929

[HartS2k]

Hi HartS2k
I never noticed the typo, just wanted you to copy and paste your log.
CBR929

Here are some more logs from this morning. The first entry is from the optical drive/DVD of 12 Angry Men (which copied onto the HDD and plays fine through the whole movie so I don't think it is a problem with the DVD). The setting was iPad without multichannel. The second entry is for The Town from a copy on the HDD. Again, the movie plays fine from the copy on the HDD but will not finish converting. It's setting is for the AppleTV set at 160kbps with Dolby Prologic II. It never finished an had to be cancelled.

Any suggestions? I'm having problems with DVD's I've already converted fine also. I can't figure out and have no idea where to go from here. Thanks for the help.

------ begin mobile work(1/2) ------


459m 22.28s: info: create config(0)
459m 22.30s: info: convert profile(iPad.h264)
459m 22.30s: info: dvd playlist(1),angle(0),chapter(1->16),3D(0)
459m 22.31s: info: streams((480.2)(128.2)(32.8))
459m 24.90s: info: not set correct fourcc for video(28)
459m 24.90s: info: set output video frame_rate(24000/1001)
459m 24.90s: info: subpicture preset(1), mode(0)
459m 26.26s: info: h264_encode: encode param profile(0) level(30) bitrate(1416)
459m 32.38s: info: subpicture(32) mode(0)
459m 32.38s: info: connect to sub render filter
459m 38.54s: display only forced subs now 1
460m 16.76s: error: filter name(native_mux), type(128), id(11), get fatal exception
460m 22.73s: ------ mobile work failed(504.00 0 error: filter name(native_mux), type(128), id(11), get fatal exception

) ------
460m 22.80s:


------ begin mobile work(2/2) ------


460m 22.80s: info: create config(0)
460m 22.80s: info: convert profile(.AppleTV)
460m 22.81s: info: dvd playlist(1),angle(0),chapter(1->14),3D(0)
460m 22.81s: info: streams((480.2)(128.2)(32.8))
460m 22.81s: info: not set correct fourcc for video(28)
460m 22.81s: info: set output video frame_rate(24000/1001)
460m 22.81s: info: subpicture preset(1), mode(0)
460m 23.93s: info: h264_encode: encode param profile(1) level(31) bitrate(1989)
460m 30.08s: info: subpicture(32) mode(0)
460m 30.11s: info: connect to sub render filter
460m 36.37s: display only forced subs now 1
1132m 36.25s: ------ cancel all mobile work -------

[damjr]

DVD ripper DVDS do not finish

I was not having any problems with DVDS finishing the recirding until today, I am using 8.1.2.0 and the DVDS DO NOT FINISH. Any advice?

[HartS2k]

Tried encoding All the President's Men into the AppleTV format first and it never finished. I then tried the iPad setting for Bad Teacher and it failed after 9 minutes. Here are the logs:

DVDFab 8.1.2.9 (2011/10/20 22:30:02)

0m 02.04s: Qt Translator file load success
0m 03.44s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 26.39s: detected dvd
0m 26.45s: drive E
0m 26.70s: dvd type 1
0m 26.70s: volume label ALL_PRESIDENTS_MEN_16X9FF
0m 27.62s: got copyright 1 fe
0m 29.00s: got udf/iso
0m 30.28s: got discinfo
0m 30.29s: pathplayer enabled
0m 57.33s: got dvdinfo
0m 57.37s: opened dvd
1m 46.40s:


------ begin mobile work(1/1) ------


1m 46.40s: info: create config(0)
1m 46.42s: info: convert profile(.AppleTV)
1m 46.42s: info: dvd playlist(1),angle(0),chapter(1->32),3D(0)
1m 46.42s: info: streams((480.2)(128.2)(32.8))
1m 48.26s: info: not set correct fourcc for video(28)
1m 48.26s: info: set output video frame_rate(24000/1001)
1m 48.26s: info: subpicture preset(1), mode(0)
1m 49.79s: info: h264_encode: encode param profile(1) level(31) bitrate(1458)
1m 55.87s: info: subpicture(32) mode(0)
1m 55.87s: info: connect to sub render filter
2m 02.03s: display only forced subs now 1
625m 21.62s: ------ cancel all mobile work -------


DVDFab 8.1.2.9 (2011/10/21 09:23:58)

0m 02.35s: Qt Translator file load success
0m 02.97s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 1
0m 18.68s: detected dvd
0m 18.75s: drive E
0m 18.79s: dvd type 0
0m 18.79s: volume label
0m 42.37s: detected dvd
0m 42.40s: drive E
0m 42.43s: dvd type 1
0m 42.43s: volume label BAD_TEACHER
0m 43.11s: got copyright 1 fe
0m 44.52s: got udf/iso
0m 53.52s: got discinfo
0m 53.75s: blu-ray 73BC2BA0409084D192CFD6DBE9E24F0974063902
0m 53.80s: cert BEE=0x00
1m 04.35s: detected cinavia
1m 04.41s: pathplayer enabled
1m 57.14s: got dvdinfo
1m 57.14s: opened dvd
2m 33.84s:


------ begin mobile work(1/1) ------


2m 33.89s: info: create config(0)
2m 33.89s: info: convert profile(iPad.h264.multichannel)
2m 33.89s: info: dvd playlist(2),angle(0),chapter(1->16),3D(0)
2m 33.89s: info: streams((480.2)(128.2)(32.8))
2m 34.11s: info: not set correct fourcc for video(28)
2m 34.12s: info: set output video frame_rate(24000/1001)
2m 34.17s: info: subpicture preset(1), mode(0)
2m 35.58s: info: h264_encode: encode param profile(1) level(31) bitrate(1428)
2m 41.64s: info: subpicture(32) mode(0)
2m 41.64s: info: connect to sub render filter
2m 47.96s: display only forced subs now 1
13m 35.69s: error: filter name(native_mux), type(128), id(11), get fatal exception
13m 42.60s: ------ mobile work failed(504.00 0 error: filter name(native_mux), type(128), id(11), get fatal exception

) ------

I've been using this product since April and have encoded hundreds of movies and am happy with those copies. Since the beginning of October/end of September, I haven't been able to encode but a couple of discs without problems. The problems have included the process not finishing, having an actual failure, or the videos not matching up with the audio. I have reinstalled the software, I have gone back to previous versions, I have checked to make sure my video card is up to date on software and I have run integrity checks on my hard drives. I am at a loss for what to do next.

Any ideas at all would be welcome.

Thanks.

[90312]

I use the Apple TV and iPad profiles pretty often but I always downmix to Stereo. Just for testing try one with Stereo at 160kbps just to see? I never see this using Stero audio.

[HartS2k]

Tried to do 12 Angry Men again, still not finishing. Changing to Stereo instead of Multichannel worked on 2 conversions but not on any others. Here is the log for the last one:

DVDFab 8.1.2.9 (2011/10/23 21:38:19)

0m 01.54s: Qt Translator file load success
0m 01.84s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2mobile 1 filemover 0
1m 11.62s: pathplayer enabled
1m 48.20s: pathplayer enabled
2m 19.91s: pathplayer enabled
3m 10.14s: pathplayer enabled
4m 06.27s: pathplayer enabled
5m 13.03s: pathplayer enabled
5m 59.02s: pathplayer enabled
6m 43.79s: pathplayer enabled
7m 25.04s: pathplayer enabled
7m 49.28s: pathplayer enabled
8m 23.83s: pathplayer enabled
8m 49.90s:


------ begin mobile work(1/11) ------


8m 49.93s: info: create config(0)
8m 49.95s: info: convert profile(iPad.h264)
8m 49.95s: info: dvd playlist(1),angle(0),chapter(1->16),3D(0)
8m 49.98s: info: streams((480.2)(128.2))
8m 50.04s: info: not set correct fourcc for video(28)
8m 50.07s: info: set output video frame_rate(24000/1001)
8m 51.41s: info: h264_encode: encode param profile(0) level(30) bitrate(1416)
14m 42.07s: ------ cancel all mobile work -------
15m 15.58s:


------ begin mobile work(1/11) ------


15m 15.63s: info: create config(0)
15m 15.64s: info: convert profile(iPad.h264)
15m 15.66s: info: dvd playlist(1),angle(0),chapter(1->16),3D(0)
15m 15.66s: info: streams((480.2)(128.2))
15m 15.71s: info: not set correct fourcc for video(28)
15m 15.78s: info: set output video frame_rate(24000/1001)
15m 16.83s: info: h264_encode: encode param profile(0) level(30) bitrate(1416)
19m 05.26s: ------ cancel all mobile work -------

[fishinggent]

Having Same Problem

I am having essentially the same problem with ripping practically any DVD using 8120 or 8126. Each DVD freezes at the same % during the rip, 4.6%, 12.3%, 7.6% repeatedly and consistantly. It doesnt matter what DVD I use, so far all have frozen during rip. This may sound redundent from one of my other posts, but all of the same rips using 8.0.8.5 are good, save for a few with lagging audio.

Whats happening guys? So many problems since 8085!

Fishinggent

[jbinkley60]

I am having essentially the same problem with ripping practically any DVD using 8120 or 8126. Each DVD freezes at the same % during the rip, 4.6%, 12.3%, 7.6% repeatedly and consistantly. It doesnt matter what DVD I use, so far all have frozen during rip. This may sound redundent from one of my other posts, but all of the same rips using 8.0.8.5 are good, save for a few with lagging audio.

Whats happening guys? So many problems since 8085!

Fishinggent

Try 8.1.28. Some fixes for not finishing are in there. I have not seen the issue with 8.1.28.

[fishinggent]

Tron legacy - no audio-only subtitles

Hi jbinkley60,

Thanks for the suggestion.

8129 ripped Tron Legacy completely, beautiful video, but without audio. The subtitles were there, but no audio. Maybe because I changed the default 64 bit audio to the highest selection of 320 bits. Whats up with the lowly 64 bit audio default in 8129 cut to 2 channels, when 8085 has 448bit and 5.1 audio as default playing through 6 channels? Are you trying to make up for the rip not finishing by defaulting to the lowest audio setting? Not very good for my 7.1 speakers, that sound fantastic with 8085

8120 would not finish the Tron Legacy rip, pausing every time at 4.6% times 3 attempts

8085 ripped beautiful video and syncronized audio for supurb playback on ps3plus 7.1 audio. Looks as good as the original DVD

One good thing is that I did not get pausing playback with the DVD rips like I have with every BDrip after 8085

Which begs my prior question. What happened since 8085? It seems like you are going backwards trying to make up for a less reliable product.

It seems like a prior reliable product has become unreliable to intermittent at best.

Please see details below

Fishinggent

No Audio with this DVD rip using 8129 (why was previously 6 channel audio that played fantastic in 8085 reduced to 2 channel audio in 8129?)

General
Complete name : \\NAS-82-4F-7A\media\Videos\TRON_LEGACY.8129.mp4
Format : MPEG-4
Format profile : Base Media
Codec ID : isom
File size : 1.20 GiB
Duration : 2h 5mn
Overall bit rate : 1 375 Kbps
Movie name : TRON_LEGACY.8129
Album : TRON_LEGACY
Writing application : Lavf52.78.4

Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Main@L3.0
Format settings, CABAC : Yes
Format settings, ReFrames : 1 frame
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 2h 5mn
Bit rate : 1 052 Kbps
Width : 720 pixels
Height : 404 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.151
Stream size : 942 MiB (77%)
Writing library : x264 core
Color primaries : BT.601-6 525, BT.1358 525, BT.1700 NTSC, SMPTE 170M
Transfer characteristics : BT.709-5, BT.1361
Matrix coefficients : BT.601-6 525, BT.1358 525, BT.1700 NTSC, SMPTE 170M

Audio
ID : 2
Format : MPEG Audio
Format version : Version 1
Format profile : Layer 3
Mode : Joint stereo
Codec ID : 6B
Duration : 2h 5mn
Bit rate mode : Constant
Bit rate : 320 Kbps
Channel(s) : 2 channels
Sampling rate : 48.0 KHz
Compression mode : Lossy
Stream size : 286 MiB (23%)
Writing library : LAME3.98.4


Beauitiful 7.1 or 5.1 audio and video with 8085 below. The sound is like being at the IMAX when I first saw and heard the movie.

General
Complete name : \\NAS-82-4F-7A\media\Videos\TRON_LEGACY.mp4
Format : MPEG-4
Format profile : Base Media
Codec ID : isom
File size : 1.30 GiB
Duration : 2h 5mn
Overall bit rate mode : Variable
Overall bit rate : 1 490 Kbps
Movie name : TRON_LEGACY
Album : TRON_LEGACY
Writing application : Lavf52.78.4

Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Main@L3.0
Format settings, CABAC : Yes
Format settings, ReFrames : 1 frame
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 2h 5mn
Bit rate : 1 051 Kbps
Width : 720 pixels
Height : 404 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.151
Stream size : 941 MiB (71%)
Writing library : x264 core
Color primaries : BT.601-6 525, BT.1358 525, BT.1700 NTSC, SMPTE 170M
Transfer characteristics : BT.709-5, BT.1361
Matrix coefficients : BT.601-6 525, BT.1358 525, BT.1700 NTSC, SMPTE 170M

Audio
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : LC
Codec ID : 40
Duration : 2h 5mn
Bit rate mode : Variable
Bit rate : 434 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 KHz
Compression mode : Lossy
Stream size : 389 MiB (29%)

[fishinggent]

8085

Please do not ever get rid of the 8085 download on your site, in case my 8085 file on my computer becomes corrupted. Beyond 8085, I do not have a need for your product.

Thanks,

Fishinggent

[jbinkley60]

I can't speak for 8.1.29 but 8.1.28 has worked fine for me, including audio. 8.1.28 is my current code and except for audo sync issues on 3 particular Blu_Rays, it's been the best realease since 8.1.0.0. I use 8.1.0.0 as my fallback code. It too has been solid (along with 8.0.8.5).

[fishinggent]

How can I download

Thanks for the great advice jbinkley60. I tried to download those from the latest beta release and the latest official releases, but when I choose 8128 or any of them, it only downloads the latest beta 8129. And the same with choosing 8100, it just downloads the latest official version 8126.

Do you or anyone know how I can get the 8100 and 8128 files without being forced to download the latest files, despite selecting earlier versions?

Thanks

Fishinggent

[GregiBoy]

[90312]

I ran into this on a movie. It ran along like gangbusters until about 12 or 13% then the CPU cycled on all cores and then just quit altogether, no CPU activity at all. I tried the same movie with two other programs in my toolbox and it completed successfully. See attached screenshot:

[fishinggent]

Cool link

Cool Link GregiBoy. I wish DvdFab 8100 and 8128 were there.

Thanks

Fishinggent