BD Ripper (3D Plus) This is War not working still

[gtsnake]

Still having troubles with "This means War". Am I doing something wrong or is there an update that I'm missing?

I set the GPU to disable but it still doesn't work. Mine says error reading disk but all the files show up. When I try to rip it just sits there.

DVDFab 8.2.0.0 (2012/08/07 19:39:49)

0m 01.44s: GPUAccelerate: 12345
0m 01.44s: CUDA cap: 0
0m 01.44s: Support coreavc decode: 0
0m 01.44s: Graphics info: NVIDIA GeForce 9800 GTX/9800 GTX+ : 3.0 : 1.1
0m 01.45s: Qt Translator file load success
0m 01.47s: Load config successful.
0m 01.53s: Init profile data driver sucessful.
0m 03.54s: Init GPU settings sucessful.
0m 03.54s: option dvd2dvd 0 dvd2mobile 0 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 0 file2dvd 1 file2bluray 1 file2mobile 0 filemover 0
0m 03.55s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 03.79s: Config ExBar successful.
0m 03.79s: dvd2dvd have 8 elements.
0m 03.86s: dvd2mobile have 31 elements.
0m 03.86s: blu-ray2blu-ray have 4 elements.
0m 03.88s: blu-ray2mobile have 20 elements.
0m 04.37s: blu-ray23d have 7 elements.
0m 04.53s: blu-ray2dvd have 1 elements.
0m 04.53s: file2mobile have 30 elements.
0m 04.53s: file2dvd have 1 elements.
0m 04.55s: file2bluray have 1 elements.
0m 04.77s: Config work ui controls successful.
0m 04.97s: Init burn engine successful.
0m 05.03s: StartNotify successful.
0m 05.05s: opening drive D
0m 05.07s: got media type 5
0m 05.07s: got max lba 0
0m 05.12s: opening drive I
0m 05.13s: got media type 15
0m 05.63s: got max lba 18886367
0m 06.99s: type Blu-ray BDMV
0m 06.99s: volume label THIS_MEANS_WAR
0m 09.71s: aacs 1 bd+ 1
0m 15.49s: Java protection is removed by StealthyClone anti-protection.
0m 15.75s: got discinfo
0m 15.82s: got bdmv
0m 15.82s: Vendor: TSSTcorp
0m 15.82s: Product: DVDWBD SH-B123L
0m 15.82s: Revision: SB02
0m 15.83s: Vendor specific: 0816
0m 15.83s: AACS version: 1
0m 15.83s: Number of concurrent AGIDs: 2
0m 15.83s: Supports bus encryption: NO
0m 15.83s: Supports binding nonce generation: NO
0m 15.83s: Supports Hybrid discs: NO
0m 15.83s: got agid 0
0m 15.89s: sent host cert chal
0m 15.90s: got drive cert chal
0m 15.90s: BEC 0
0m 15.90s: DRIVE_VENDOR 0x0386
0m 15.97s: got drive key
0m 16.37s: got host key signature
0m 16.37s: verified drive signature
0m 16.37s: verified host signature
0m 16.45s: sent host signature and key point
0m 16.45s: got bus key
0m 16.46s: got agid 0
0m 16.52s: sent host cert chal
0m 16.52s: got drive cert chal
0m 16.52s: BEC 0
0m 16.52s: DRIVE_VENDOR 0x0386
0m 16.60s: got drive key
0m 16.60s: got host key signature
0m 16.60s: verified drive signature
0m 16.60s: verified host signature
0m 16.68s: sent host signature and key point
0m 16.68s: got bus key
0m 19.03s: got volume id
0m 19.03s: got volume id mac
0m 19.03s: volume id is correct
0m 19.04s: got vid
0m 19.14s: blu-ray 034CCE473D1CC26BA55CF925F249E23812EACE59
0m 19.69s: cert BEE=0x00 same
0m 20.26s: D 53FA0C7D
0m 39.54s: got vuk
0m 39.54s: got fut
0m 39.76s: got unit key 7
1m 20.37s: got extended bdinfo
1m 20.38s: opened blu-ray
1m 45.15s: read error: 11 1441248 8464781 5344488 602


Now what?

[jbinkley60]

A resd error is typically a problem reading the disc. Have you tried cleaning it ?

[Jonatan]

This means war

I think you posted in the wrong thread this is a bluray copy issue but I just copied the main movie I used 8.1.7.8 it opened and copy no problem @ bd50 cbr might have a copy of. 7.8 good luck

[CBR929]

I think you posted in the wrong thread this is a bluray copy issue but I just copied the main movie I used 8.1.7.8 it opened and copy no problem @ bd50 Moderator CBR929 might have a copy of. 7.8 good luck

Yes I do, as I keep all installers as they take up very little room on a HDD
CBR929

[gtsnake]

I think you posted in the wrong thread this is a bluray copy issue but I just copied the main movie I used 8.1.7.8 it opened and copy no problem @ bd50 cbr might have a copy of. 7.8 good luck

I never copy so I only use Ripper. I tried it first with 8.1.7.8 and it didn't work. Then I upgraded it to the latest release and it still doesn't work.

[Jonatan]

Ripper

I rip all my movie to media paler but I first copy main movie on DVD or bluray copy first get it on hdd first

[CBR929]

Hi gtsnake
As stated above you're receiving a read error which usually means a dirty or scratched disc, or a defective disc.
Try cleaning the disc.

Your drive also has a firmware update you will find it here

NOTE: If you do not know how to flash your drive do not do it, it will render your drive useless.
Hope this helps
CBR929

[gtsnake]

Hi gtsnake
As stated above you're receiving a read error which usually means a dirty or scratched disc, or a defective disc.
Try cleaning the disc.

Your drive also has a firmware update you will find it here

NOTE: If you do not know how to flash your drive do not do it, it will render your drive useless.
Hope this helps
CBR929

Alright I'll get a new disk. But the old one looked pretty spotless.

How difficult can it be to update the new firmware? Download and install right?

[jbinkley60]

I've had discs which looked perfectly clean but would hang at certain spots. Upon cleaning them with a disc cleaner, they worked fine. It's only happened on a few but in both cases they were brand new discs and came that way out of the package.

[CBR929]

Alright I'll get a new disk. But the old one looked pretty spotless.

How difficult can it be to update the new firmware? Download and install right?

Hi gtsnake
Yes, most come with an installer and are pretty straight forward.

You take all responsibility if something goes wrong.
CBR929

[gtsnake]

I've had discs which looked perfectly clean but would hang at certain spots. Upon cleaning them with a disc cleaner, they worked fine. It's only happened on a few but in both cases they were brand new discs and came that way out of the package.

Ok, I got a new disc and it's still the same problem so it's not the disk.....

[terry5]

The latest internal log is needed. Please post it.

[gtsnake]

The latest internal log is needed. Please post it.

Here it is. Please help.


DVDFab 8.2.0.0 (2012/08/16 17:01:43)

0m 01.92s: GPUAccelerate: 12345
0m 01.92s: CUDA cap: 0
0m 01.92s: Support coreavc decode: 0
0m 01.92s: Graphics info: NVIDIA GeForce 9800 GTX/9800 GTX+ : 3.0 : 1.1
0m 01.93s: Qt Translator file load success
0m 01.97s: Load config successful.
0m 02.05s: Init profile data driver sucessful.
0m 04.42s: Init GPU settings sucessful.
0m 04.42s: option dvd2dvd 0 dvd2mobile 0 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 0 file2dvd 1 file2bluray 1 file2mobile 0 filemover 0
0m 04.44s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 04.68s: Config ExBar successful.
0m 04.68s: dvd2dvd have 8 elements.
0m 04.75s: dvd2mobile have 31 elements.
0m 04.76s: blu-ray2blu-ray have 4 elements.
0m 04.78s: blu-ray2mobile have 20 elements.
0m 05.26s: blu-ray23d have 7 elements.
0m 05.42s: blu-ray2dvd have 1 elements.
0m 05.42s: file2mobile have 30 elements.
0m 05.42s: file2dvd have 1 elements.
0m 05.44s: file2bluray have 1 elements.
0m 05.66s: Config work ui controls successful.
0m 06.32s: Init burn engine successful.
0m 06.39s: StartNotify successful.
0m 06.46s: opening drive D
0m 06.48s: got media type 5
0m 06.48s: got max lba 0
0m 06.52s: opening drive I
0m 06.52s: got media type 15
0m 08.96s: got max lba 18886367
0m 10.48s: type Blu-ray BDMV
0m 10.48s: volume label THIS_MEANS_WAR
0m 13.78s: aacs 1 bd+ 1
0m 19.46s: Java protection is removed by StealthyClone anti-protection.
0m 19.73s: got discinfo
0m 19.79s: got bdmv
0m 19.80s: Vendor: TSSTcorp
0m 19.80s: Product: DVDWBD SH-B123L
0m 19.80s: Revision: SB02
0m 19.80s: Vendor specific: 0816
0m 19.80s: AACS version: 1
0m 19.80s: Number of concurrent AGIDs: 2
0m 19.80s: Supports bus encryption: NO
0m 19.81s: Supports binding nonce generation: NO
0m 19.81s: Supports Hybrid discs: NO
0m 19.81s: got agid 0
0m 19.87s: sent host cert chal
0m 19.87s: got drive cert chal
0m 19.87s: BEC 0
0m 19.87s: DRIVE_VENDOR 0x0386
0m 19.95s: got drive key
0m 20.32s: got host key signature
0m 20.32s: verified drive signature
0m 20.32s: verified host signature
0m 20.40s: sent host signature and key point
0m 20.40s: got bus key
0m 20.41s: got agid 0
0m 20.47s: sent host cert chal
0m 20.47s: got drive cert chal
0m 20.47s: BEC 0
0m 20.48s: DRIVE_VENDOR 0x0386
0m 20.55s: got drive key
0m 20.55s: got host key signature
0m 20.56s: verified drive signature
0m 20.56s: verified host signature
0m 20.64s: sent host signature and key point
0m 20.64s: got bus key
0m 23.04s: got volume id
0m 23.04s: got volume id mac
0m 23.04s: volume id is correct
0m 23.04s: got vid
0m 23.15s: blu-ray 034CCE473D1CC26BA55CF925F249E23812EACE59
0m 23.67s: cert BEE=0x00 same
0m 23.94s: D 53FA0C7D
0m 43.11s: got vuk
0m 43.12s: got fut
0m 43.34s: got unit key 7
1m 01.50s: got extended bdinfo
1m 01.51s: opened blu-ray
1m 05.13s: WorkAttr::Init Start
1m 05.18s: WorkAttr::Init OK: mkv.remux
1m 05.37s: info: enable multi-thread software decoder
1m 05.37s: info: subpicture(4608) mode(1)
1m 05.38s: info: connect to sub render filter
1m 05.45s: info: processing source(00600.m2ts)
1m 10.78s: 3m 56.63s:


------ begin mobile work(1/1) ------


3m 56.63s: info: create config(5)
3m 56.63s: info: convert profile(mkv.remux)
3m 56.63s: info: bluray playlist(802),angle(0),chapter(1->25),3D(0)
3m 56.63s: info: streams((4113.1)(4352.1)(4608.16)(4609.16))
3m 58.68s: info: subpicture preset(2), mode(10)
3m 58.68s: info: subpicture preset(2), mode(10)
3m 58.69s: subpicture(4608) mode(10)
3m 58.70s: info: processing source(00600.m2ts)
4m 50.20s: Analyze >> Find Forced Subtitle Stream! >> PID( 4608 ) - Language( English ) - First Time At( timestamp: 00:02:19:264 )
4m 53.46s: info: processing source(00608.m2ts)
6m 15.46s: info: processing source(00602.m2ts)
18m 38.83s: info: processing source(00609.m2ts)
18m 55.92s: info: processing source(00604.m2ts)
20m 13.68s: info: processing source(00610.m2ts)
21m 23.51s: info: processing source(00606.m2ts)
25m 19.60s: info: processing source(00611.m2ts)
26m 36.12s: error: filter name(509.01), type(128), id(14), get fatal exception
26m 41.31s: terminate process
26m 41.31s: error: filter name(509.01), type(128), id(14), get fatal exception