BD Ripper (3D Plus) No Audio when Ripping in DVDFab 9

[hans302]

Tried ripping both DVDs and Blu-Rays in Version 9 using my usual settings I have always used in version 8. And no Audio is present in the output file.

Here is a Log file.


DVDFab 9.0.1.1 (2012/11/26 05:34:08)

0m 00.58s: GPUAccelerate: 451
0m 00.58s: CUDA cap: 0
0m 00.59s: Support coreavc decode: 0
0m 00.59s: Graphics info: ATI Radeon HD 5450 : :
0m 00.59s: Qt Translator file load success
0m 00.65s: Start get sys number.
0m 00.65s: Serial number is: 00-05-9a-3c-7a-00:40-61-86-7a-6b-b2
0m 00.65s: Reg URL link is:
0m 00.65s: Version is: 9011
0m 00.66s: Product is: 2
0m 00.66s: Connect type is: 0
0m 02.62s: Times of connecting error is: 0
0m 02.62s: Parse string is: 2:8260762964
0m 02.62s: Parse string is: 11:8260762964
0m 02.62s: Parse string is: 80:12289087891
0m 02.63s: Parse string is: 50:8263532095
0m 02.63s: Parse string is: 21:8263532095
0m 02.63s: Parse string is: 20:8263532095
0m 02.63s: Parse string is: 22:8260762964
0m 02.63s: Parse string is: OV:9011
0m 02.63s: Parse string is: BV:9008
0m 03.16s: Parse string is: S:8b4e73402323624d22809a74f5e45027
0m 03.16s: End check info.
0m 03.17s: Load config successful.
0m 03.21s: Init profile data driver sucessful.
0m 03.32s: Init GPU settings sucessful.
0m 03.32s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 03.32s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 26.90s: Init burn engine successful.
1m 25.73s: opening drive E
1m 25.86s: opened i/o
1m 25.86s: failed to detect media type
1m 25.87s: got disc type 0
1m 25.87s: got max lba 0
3m 56.48s: opening drive E
3m 57.11s: opened i/o
3m 57.12s: got media type 15
3m 57.57s: got disc type 0
3m 57.58s: got max lba 14677311
3m 58.35s: type Blu-ray BDMV
3m 58.35s: volume label FOTR_D1_UK
3m 58.38s: aacs 1 bd+ 0
4m 02.30s: Java protection is removed by StealthyClone anti-protection.
4m 02.39s: got discinfo
4m 02.46s: got bdmv
4m 02.47s: Vendor: HL-DT-ST
4m 02.47s: Product: BDDVDRW CH10L
4m 02.47s: Revision: BC2A
4m 02.47s: Vendor specific: @
4m 02.48s: AACS version: 1
4m 02.48s: Number of concurrent AGIDs: 1
4m 02.48s: Supports bus encryption: NO
4m 02.48s: Supports binding nonce generation: YES
4m 02.48s: Supports Hybrid discs: NO
4m 02.48s: got agid 0
4m 02.50s: sent host cert chal
4m 02.51s: got drive cert chal
4m 02.51s: BEC 0
4m 02.51s: DRIVE_VENDOR 0x0116
4m 02.54s: got drive key
4m 02.54s: got host key signature
4m 02.54s: verified drive signature
4m 02.55s: verified host signature
4m 02.58s: sent host signature and key point
4m 02.58s: got bus key
4m 02.59s: got agid 0
4m 02.61s: sent host cert chal
4m 02.62s: got drive cert chal
4m 02.62s: BEC 0
4m 02.62s: DRIVE_VENDOR 0x0116
4m 02.65s: got drive key
4m 02.66s: got host key signature
4m 02.66s: verified drive signature
4m 02.66s: verified host signature
4m 02.69s: sent host signature and key point
4m 02.69s: got bus key
4m 02.69s: got volume id
4m 02.70s: got volume id mac
4m 02.70s: volume id is correct
4m 02.70s: got vid
4m 02.82s: blu-ray ED559C7D1BC240DF18492A2F5F184C6C9DD35625
4m 03.41s: cert BEE=0x00 same
4m 03.98s: D 5E2786F1
4m 03.99s: got vuk
4m 04.00s: got unit key 1
4m 08.51s: got extended bdinfo
4m 08.51s: opened blu-ray
4m 21.06s: Subtitle default mode is invalid, so set default mode is 1
5m 03.93s: Subtitle default mode is invalid, so set default mode is 1
5m 03.98s: Subtitle default mode is invalid, so set default mode is 1
5m 55.28s: Subtitle default mode is invalid, so set default mode is 1
5m 55.33s: Subtitle default mode is invalid, so set default mode is 1
13m 35.02s: Start check Blu-ray Ripper register status.
13m 35.02s: End check Blu-ray Ripper register status: Enable
13m 35.11s: OPList at BD Ripper : (4113.2),(4609.8)
13m 35.11s: Blu-ray ripper check watermark flag: 0
13m 35.11s:


------ begin mobile work(1/1) ------


13m 35.12s: info: create config(5)
13m 35.12s: info: convert profile(Apple TV3)
13m 35.12s: info: bluray playlist(1689),angle(0),chapter(1->28),3D(0)
13m 35.12s: info: streams((4113.2)(4609.8))
13m 35.15s: info: not set correct fourcc for video(28)
13m 35.15s: libmwork : perset file config OK !13m 35.15s: info: set output video frame_rate(24000/1001)
13m 35.16s: info: subpicture preset(1), mode(1)
13m 35.17s: info: enable multi-thread software decoder
13m 36.29s: warning: h264 encode macroblocks per second(194205) exceed the standard(108000), video size(1920x1080, 23.976), specify profile(1)-level(31)
13m 36.29s: info: h264_encode: encode param profile(1) level(40) bitrate(5000)
13m 38.31s: info: subpicture(4609) mode(1)
13m 38.32s: info: connect to sub render filter
13m 40.34s: info: processing source(00000.m2ts)
62m 38.40s:


------ finish mobile work ------


69m 14.59s: Subtitle default mode is invalid, so set default mode is 1

[athlon700]

I had the same problem with all the v9 upgrades. try this. uninstall v9 completely and re-install it fresh. that fixed mine.

[90312]

I think it suffers the same issue as some other profiles, aac "main" when aac "LC' is required.

[itzaferg]

Having the same issue. Tried ripping using AppleTV profiles. Switched to iPad 1080 profile and that seemed to work.

[PaulVA]

Yes, the Ipad3 1080p profile works fine. One test is if you can play in iTunes it probably will play in Apple TV. You also don't need to wait for a full rip to complete to test if the updated version is working (it's not now) . Just get a small bit ripped than try and play it. If you do a get info in iTunes you'll notice using the Apple TV / Apple TV3 profiles you see NO sound values. It's cause it can't see any it knows.

[somls1ws6]

I too cant get audio when using v9. I am new to this software and am thinking about going back to the free software I was using before purchasing this. Usually how quickly will this be fixed and a new revision of the software released? I downloaded v8 and it is working fine so my money hasn't gone to waste entirely. I do have, on some DVD's, audio and video sinc problems with 8 that I am unsure at this point if 9 would have the same problem, I wont know that until I get any audio at all from 9, LOL.

[Brazingo]

AppleTV profiles - I just tried the re-instal, that did NOT work. The use of the iPad3 1080p does work. Until they fix this bug, suggest the use of the iPad3 Profile.

[Justin]

add the avi.h264.audiocopy profile to that no audio for this profile as well.

DVDFab 9.0.1.7 (2012/12/24 13:29:05)

0m 00.26s: GPUAccelerate: 3
0m 00.28s: CUDA cap: 0
0m 00.28s: Support coreavc decode: 0
0m 00.28s: Graphics info: ATI Radeon HD 5700 Series : :
0m 00.67s: Qt Translator file load success
0m 00.70s: Start get sys number.
0m 00.70s: Serial number is: e0-cb-4e-e0-55-c2
0m 00.71s: Reg URL link is:
0m 00.71s: Version is: 9017
0m 00.71s: Product is: 2
0m 00.71s: Connect type is: 0
0m 04.41s: Times of connecting error is: 0
0m 04.41s: Parse string is: 2:12295023780
0m 04.41s: Parse string is: 11:8263532095
0m 04.41s: Parse string is: 20:8260762964
0m 04.41s: Parse string is: 21:8260762964
0m 04.41s: Parse string is: 22:8260762964
0m 04.43s: Parse string is: 60:8260762964
0m 04.43s: Parse string is: 200:1381541077
0m 04.43s: Parse string is: OV:9017
0m 04.43s: Parse string is: BV:
0m 04.43s: Parse string is: S:eccec16422bedcae33ea6343e955699e
0m 04.82s: End check info.
0m 04.82s: Load config successful.
0m 05.00s: Init profile data driver sucessful.
0m 05.00s: Init GPU settings sucessful.
0m 05.02s: option dvd2dvd 1 dvd2mobile 1 bluray2bluray 1 bd2mobile 1 bd23d 1 bd2dvd 1 file2dvd 1 file2bluray 1 file2mobile 1 filemover 1
0m 05.02s: dvd2dvd:dvd2mobile:blu-ray2blu-ray:blu-ray2mobile:blu-ray23d:blu-ray2dvd:file2mobile:file2dvd:file2bluray:
0m 14.21s: Init burn engine successful.
0m 14.82s: opening drive F
0m 14.89s: opened i/o
0m 14.89s: failed to detect media type: sensekey 00 asc 00 acsq 00
0m 14.91s: got max lba 0
0m 41.20s: opening iso E:/9 SONGS.iso
0m 41.20s: got media type 15
0m 41.20s: got max lba 7451935
0m 41.21s: got disc type 20
0m 41.21s: type Blu-ray BDMV
0m 41.21s: volume label 9 SONGS
0m 41.25s: internal path [:/BDMV/
0m 41.26s: aacs 0 bd+ 0
0m 41.26s: got discinfo
0m 41.27s: got bdmv
0m 41.29s: got extended bdinfo
0m 41.29s: opened blu-ray
1m 09.69s: Start check Blu-ray Ripper register status.
1m 09.69s: End check Blu-ray Ripper register status: Enable
1m 09.70s: OPList at BD Ripper : (4113.2),(4353.4)
1m 09.70s: Blu-ray ripper check watermark flag: 0
1m 09.71s:


------ begin mobile work(1/1) ------


1m 09.71s: info: create config(5)
1m 09.71s: info: convert profile(avi.h264.audiocopy)
1m 09.72s: info: bluray playlist(6),angle(0),chapter(1->12),3D(0)
1m 09.72s: info: streams((4113.2)(4353.4))
1m 09.87s: libmwork : perset file config OK !
1m 09.87s: info: set output video frame_rate(25/1)
1m 09.88s: info: enable multi-thread software decoder
1m 10.93s: info: h264_encode: encode param profile(2) level(41) bitrate(7460)
1m 14.95s: info: processing source(00008.m2ts)
77m 43.54s:

[ionic57]

Same problem here: No audio in output file when Ripping a DVD. Any solutions?

DVDFab: 9.0.1.6
Ripper Profile: Apple TV 3
OS: Windows 8 Pro x64

[90312]

Same problem here: No audio in output file when Ripping a DVD. Any solutions?

DVDFab: 9.0.1.6
Ripper Profile: Apple TV 3
OS: Windows 8 Pro x64

The temporary solution is to use one of the iPad profiles until this is corrected.

[ionic57]

Any update?

Hey guys,
Any update on this issue?

Issue: No audio in output file when Ripping a DVD.

DVDFab: 9.0.1.6
Ripper Profile: Apple TV 3
OS: Windows 8 Pro x64

[90312]

Yes, update to version 9.0.1.8 problem solved!

[TheBlus]

I'm experiencing the same issue. The video comes out great, but audio.

I'm using DVDFab v9.0.2.0 Qt. I'm ripping a bluray movie to mp4.h264.acc.

I can only get audio when playback the video file via xbmc. There's no audio when playback with Windows Media Center, Windows Media Player, or iTunes. My TV is capable of playing the mp4.h264.acc, but I'm not getting audio from it either.

I have the same experience with DVDFab v8.2.2.6 Qt. For this version, I also found that the ripped video is not as smooth as the one created with v9.0.2.0 Qt.

Are you guys, at DVDFab, seeing this? Any further update on this issue?

[TheBlus]

There's been a error on my part in my environment. I believe the audio is now working again with the video using v9.0.2.0 Qt. I'll confirm and post another update.

[TheBlus]

Confirmed it was my mistake. My latest bluray rip to mp4.h264.aac worked great with DVDFab v9.0.2.0 Qt. Able to playback in Windows Media Center, Windows Media Player, iTunes, and TV.