Announcement

Collapse
No announcement yet.

Enhancer AI Fails 100% Reproducible After Installer New AMD RX6750 Graphics Card

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    DVDFab Video Enhancer Enhancer AI Fails 100% Reproducible After Installer New AMD RX6750 Graphics Card

    I have attempted to the last 2 versions, 1030, 1029. Once the process starts, it fails almost immediately. When I first ran it on 1030, I had an old Nvidia GTX980 that did not have a supported GPU, so only CPU processing was supported. It ran, but it was going to take many hours to complete (these are not long video files). I then replaced it with the AMD card, but now it just fails every time. In my last run, I unchecked the GPU options in settings, but it did not make a difference.

    The utilities log repeatedly shows:
    ...
    Code:
    utility service module 1.1 (2022/06/08 11:04:03) (X64)
    
    2022.06.08-11:04:03: FATAL ERROR: the header file is inconsistent with dll, dll version:, header file version: 20220124-d1ec5e7
    2022.06.08-11:04:08: Check web api version,1050.1050
    and the Enhancer AI log shows:
    Code:
    2022.06.08-10:56:40: start process(1/1)
    
    ------ process working ------
    2022.06.08-10:56:40: info, try to open file C:/Users/mirivera/Videos/Feathers South-2022-06-07 10.10.57.120 AM.mp4
    2022.06.08-10:56:40: info: open successed, iformat = QuickTime / MOV
    2022.06.08-10:56:40: set source (1)(1)
    2022.06.08-10:56:40: after work start (1)(1)
    2022.06.08-10:56:40: run work (1)(0)
    2022.06.08-10:56:40: after run work(1)
    2022.06.08-10:56:40: info: create config(videoconvert)
    2022.06.08-10:56:40: info: crop value after clone: left = 0 right= 0 top=0 bottom=0 enable=0 mode=0
    2022.06.08-10:56:40: info: use profile(MKV.H265)
    2022.06.08-10:56:40: info: file (.mp4)
    2022.06.08-10:56:40: info: 3D working_mode(disable), 3D format(sbs_lef_right)
    2022.06.08-10:56:40: info: work_status(1) can_pause(1) last_error(-1) cancel(false)
    2022.06.08-10:56:40: info: stream input@ Video(1)[codec(h264) size(2560*1440) fps(15000/1001) interlace(0) duration(19)sec opcode(compress) fmt(yuv420p) profile(578) level(50)]
    2022.06.08-10:56:40: info: perset file config OK !
    2022.06.08-10:56:40: info: ai params = 307 1.0 1000
    2022.06.08-10:56:40: info: recommand= 4032, Shrink support= 1, enable= 1, cuda_cap= 0 , cpu_count= 16
    2022.06.08-10:56:40: info: Intel(R) Core(TM) i9-9900K CPU @ 3.60GHz
    2022.06.08-10:56:40: info: set output video frame_rate(15000/1001)
    2022.06.08-10:56:40: info: vdecode hevc= 0, h264= 0, vc1= 0, mpeg2= 0, vencode h264= 0, hevc= 0 , plat = 9
    2022.06.08-10:56:40: info: stream output Video(1)[codec(hevc) size(3840*2160) fps(15000/1001) interlace(0) bitrate(18760) duration(19)sec fmt(yuv420p) profile(578) level(50)]
    2022.06.08-10:56:40: info: SubMode(Remux) -- Display Only forced Subtitle(false)
    2022.06.08-10:56:40: info: work config prepare finish
    2022.06.08-10:56:40: UILog:MsgWork:WorkStatus_Start
    2022.06.08-10:56:40: info: begin render pin
    2022.06.08-10:56:40: info: enable multi-thread software decoder, thread count = 16
    2022.06.08-10:56:40: info: ex process path= C:/Program Files/DVDFab/Video Enhancer AI/depenceai/fabcore.exe
    2022.06.08-10:56:41: info: h265_encode: encode param profile(1) level(50) bitrate(18760) crf(-1)
    2022.06.08-10:56:41: info: --dvdfabaiscale 2560:1440 --ai_model_index 307 --ai_memory_fraction 1000 --ailogpath C:/Users/mirivera/Documents/DVDFab/Video Enhancer AI/Log/ --aipb C:/Users/mirivera/Documents/DVDFab/Video Enhancer AI/Temp/AImode/ --aidll C:/Program Files/DVDFab/Video Enhancer AI/depenceai/ --usage_type 10 --hardware_type 2 --ai_br 0 --ai_high_pad 0
    2022.06.08-10:56:41: info: xbin path C:/Program Files/DVDFab/Video Enhancer AI/depenceai/xbin/
    2022.06.08-10:56:42: info: begin create all filters
    2022.06.08-10:56:50: [COLOR=#c0392b][B]error[/B][/COLOR]: terminal filter (7c78-filter_h265_ex-0-1) (fabcore.exe)
    2022.06.08-10:56:50: [COLOR=#c0392b][B]error[/B][/COLOR]: filter video decode process filter config info to exit running process, 737
    2022.06.08-10:56:51: [COLOR=#c0392b][B]error[/B][/COLOR]: mkv process filter config info to exit running process, 737
    2022.06.08-10:56:52:
    ------ process exit ------
    2022.06.08-10:56:52: wait finish (0)
    2022.06.08-10:56:52: after wait finish(0)
    2022.06.08-10:56:52: ------------------ all convert work cancelled -------------------
    2022.06.08-10:56:52: Enlarger AI: Return value is 0
    2022.06.08-10:56:52: Workcontrol: return value is 10, user do not clicked cancel.
    2022.06.08-10:56:52: WorkControl: end user copy.
    2022.06.08-10:56:54: ========current work finish: [COLOR=#c0392b][B]WorkStatus_Failed[/B][/COLOR]========
    2022.06.08-10:56:55: UILog:Error of modules: Converter
    2022.06.08-10:56:55: UILog: Run Work to end.
    2022.06.08-10:56:55: UILog: btn Visible: left btn 0 right btn 7
    2022.06.08-10:56:55: UILog: btn Visible: left btn 0 right btn 7
    2022.06.08-10:56:55: UILog: 0xdec51d60 work ctrl status 0->3

    Please help, TIA!

    M
    Attached Files

    #2
    Thank you for posting, I have passed your message and the log file to the developer.

    Comment


      #3
      Thank you!

      Comment


        #4
        If the AMD issue gets resolved, do not expect fast conversions using hardware support e.g. using hardware support a 3 minute video can take over 30 minutes to process using my RTX 3080 10GB GDDR6X. And for my old home videos, a 30 minute one can take overnight and with only a very minimal improvement to the quality of the old video

        Comment

        Working...
        X