2d to 3d blu ray, best way

[mrbasilbrush]

hi
thanks for your help again.
i can't find anymore logs for warhorse, so what i'll do is clear all the logs and try it again as since warhorse i've cloned ansd shrunk jack reacher, skyfall etc and its fall of logs.
i will post a log afterwards...you never know i might be lucky and it works this time... ps i put the last warhorse that froze onto disc using img but it didn't play.
maybe i got img settings wrong or maybe the files were corrupt as it froze, not really sure why as it plays on the pc ok with the side by side screens.

hi here is the log







DVDFab 9.0.3.2 (2013/04/19 21:59:15)

0m 00.09s: Start preload dll...
0m 00.13s: Load dll successful.
0m 00.13s: Start load fabplay dll...
0m 00.18s: Load fabplay dll successful.
0m 00.18s: Windows os type is: 14.
0m 00.18s: Transfer settings successful.
0m 00.20s: GPUAccelerate: 5
0m 00.20s: CUDA cap: 0
0m 00.20s: Support coreavc decode: 0
0m 00.20s: Graphics info: Intel(R) HD Graphics : :
0m 00.20s: Qt Translator file load success
0m 00.23s: Start get sys number.
0m 00.25s: Serial number is: 50-46-5d-08-5d-89
0m 00.25s: Reg URL link is:
0m 00.25s: Version is: 9032
0m 00.25s: Product is: 2
0m 00.25s: Connect type is: 1
0m 00.98s: Times of connecting error is: 0
0m 00.98s: Parse string is: 1:17
0m 00.98s: Parse string is: 2:17
0m 00.98s: Parse string is: 20:15
0m 00.98s: Parse string is: 21:23
0m 00.98s: Parse string is: 50:30
0m 00.98s: Parse string is: 70:23
0m 00.98s: Parse string is: OV:9028
0m 00.98s: Parse string is: BV:9034
0m 01.25s: option - 0 : 1 - 2 : 1 - 2 : 1 - 11 : 1 - 20 : 1 - 21 : 1 - 50 : 1 - 60 : 1 - 61 : 1 - 62 : 1 - 80 : 1 - 22 : 1 - 70 : 1 - 71 : 1 - 72 : 1
0m 01.25s: End check info.
0m 01.25s: Load config successful.
0m 01.33s: Init profile data driver sucessful.
0m 01.33s: Init GPU settings sucessful.
0m 04.82s: Begin init preview play engine.
0m 04.82s: Init DirectShow engine successful.
0m 05.20s: Init burn engine successful.
0m 06.52s: opening drive E
0m 06.52s: opened i/o
0m 06.52s: got media type 16
0m 06.56s: got max lba 20072607
0m 06.86s: got disc type 20
0m 06.86s: type Blu-ray BDMV
0m 06.86s: volume label TT3D CLOSER TO THE EDGE
0m 06.87s: opening drive G
0m 06.87s: opened i/o
0m 06.87s: got media type 4
0m 06.87s: got max lba 20072607
0m 06.88s: got disc type 11
0m 06.88s: type DVD-AVCHD
0m 06.88s: volume label
0m 06.89s: opening drive D
0m 06.90s: opened i/o
0m 06.90s: failed to detect media type: sensekey 00 asc 00 acsq 00
0m 06.91s: got max lba 0
0m 06.93s: opening drive F
0m 06.93s: opened i/o
0m 06.93s: failed to detect media type: sensekey 00 asc 00 acsq 00
0m 06.94s: got max lba 0
0m 06.98s: internal path E:/BDMV/
0m 06.99s: aacs 0 bd+ 0
0m 07.01s: got bdmv
0m 07.04s: got discinfo
0m 07.06s: got bdmv
0m 07.23s: Profile Manager :: End Load Profile
0m 07.98s: got extended bdinfo
0m 07.98s: opened blu-ray
0m 16.51s: ========WorkAttr::SetSource=======
0m 16.51s: Source Title :
0m 16.51s: Source Video Codec : mpeg2
0m 16.51s: Source Video Size Original : 1920 x 1040
0m 16.51s: Source Video Size Display : 1920 x 1040
0m 16.51s: Source Video FPS : 24000 / 1001
0m 16.51s: Source Video Bitrate : 1200
0m 16.51s: Source Audio Codec : aac
0m 16.51s: Source Audio Bitrate : 0
0m 16.51s: Source Audio Channels : 6
0m 16.51s: Source Audio Volume : 100
0m 16.51s: Work Profile : m2ts.default
0m 17.98s: CommmandLine in fabopensource is
1m 11.72s: opening iso C:/Users/mrfox/Documents/3d films/WAR_HORSE_D1.iso
1m 11.74s: got media type 15
1m 11.75s: got max lba 11831711
1m 11.79s: got disc type 20
1m 11.79s: type Blu-ray BDMV
1m 11.79s: volume label WAR_HORSE_D1
1m 11.85s: internal path [:/BDMV/
1m 11.85s: aacs 0 bd+ 0
1m 11.85s: got bdmv
1m 11.89s: got discinfo
1m 11.89s: got bdmv
1m 12.02s: got extended bdinfo
1m 12.02s: opened blu-ray
1m 12.87s: ========WorkAttr::SetSource=======
1m 12.87s: Source Title :
1m 12.87s: Source Video Codec : mpeg2
1m 12.87s: Source Video Size Original : 1920 x 800
1m 12.87s: Source Video Size Display : 1920 x 800
1m 12.87s: Source Video FPS : 24000 / 1001
1m 12.87s: Source Video Bitrate : 1200
1m 12.87s: Source Audio Codec : aac
1m 12.87s: Source Audio Bitrate : 0
1m 12.87s: Source Audio Channels : 8
1m 12.87s: Source Audio Volume : 100
1m 12.87s: Work Profile : m2ts.default
1m 43.01s: ========WorkAttr::SetSource=======
1m 43.01s: Source Title :
1m 43.01s: Source Video Codec : mpeg2
1m 43.01s: Source Video Size Original : 1920 x 800
1m 43.01s: Source Video Size Display : 1920 x 800
1m 43.01s: Source Video FPS : 24000 / 1001
1m 43.01s: Source Video Bitrate : 1200
1m 43.01s: Source Audio Codec : aac
1m 43.01s: Source Audio Bitrate : 0
1m 43.01s: Source Audio Channels : 8
1m 43.01s: Source Audio Volume : 100
1m 43.01s: Work Profile : 3d.m2ts.audiocopy.normal
1m 43.04s: ========WorkAttr::SetSource=======
1m 43.04s: Source Title :
1m 43.04s: Source Video Codec : mpeg2
1m 43.04s: Source Video Size Original : 1920 x 800
1m 43.04s: Source Video Size Display : 1920 x 800
1m 43.04s: Source Video FPS : 24000 / 1001
1m 43.04s: Source Video Bitrate : 1200
1m 43.04s: Source Audio Codec : aac
1m 43.04s: Source Audio Bitrate : 0
1m 43.04s: Source Audio Channels : 8
1m 43.04s: Source Audio Volume : 100
1m 43.04s: Work Profile : 3d.m2ts.audiocopy.normal
1m 43.05s: ========WorkAttr::SetSource=======
1m 43.05s: Source Title :
1m 43.05s: Source Video Codec : mpeg2
1m 43.05s: Source Video Size Original : 1920 x 800
1m 43.05s: Source Video Size Display : 1920 x 800
1m 43.05s: Source Video FPS : 24000 / 1001
1m 43.05s: Source Video Bitrate : 1200
1m 43.05s: Source Audio Codec : aac
1m 43.05s: Source Audio Bitrate : 0
1m 43.05s: Source Audio Channels : 8
1m 43.05s: Source Audio Volume : 100
1m 43.05s: Work Profile : 3d.m2ts.audiocopy.normal
1m 46.61s: ========WorkAttr::SetSource=======
1m 46.61s: Source Title :
1m 46.61s: Source Video Codec : mpeg2
1m 46.61s: Source Video Size Original : 1920 x 800
1m 46.61s: Source Video Size Display : 1920 x 800
1m 46.61s: Source Video FPS : 24000 / 1001
1m 46.61s: Source Video Bitrate : 1200
1m 46.61s: Source Audio Codec : aac
1m 46.61s: Source Audio Bitrate : 0
1m 46.61s: Source Audio Channels : 8
1m 46.61s: Source Audio Volume : 100
1m 46.61s: Work Profile : 3d.m2ts.audiocopy.normal
1m 58.56s: ========WorkAttr::SetSource=======
1m 58.56s: Source Title :
1m 58.56s: Source Video Codec : mpeg2
1m 58.56s: Source Video Size Original : 1920 x 800
1m 58.56s: Source Video Size Display : 1920 x 800
1m 58.56s: Source Video FPS : 24000 / 1001
1m 58.56s: Source Video Bitrate : 1200
1m 58.56s: Source Audio Codec : aac
1m 58.56s: Source Audio Bitrate : 0
1m 58.56s: Source Audio Channels : 8
1m 58.56s: Source Audio Volume : 100
1m 58.56s: Work Profile : m2ts.default
1m 58.58s: ========WorkAttr::SetSource=======
1m 58.58s: Source Title :
1m 58.58s: Source Video Codec : mpeg2
1m 58.58s: Source Video Size Original : 1920 x 800
1m 58.58s: Source Video Size Display : 1920 x 800
1m 58.58s: Source Video FPS : 24000 / 1001
1m 58.58s: Source Video Bitrate : 1200
1m 58.58s: Source Audio Codec : aac
1m 58.58s: Source Audio Bitrate : 0
1m 58.58s: Source Audio Channels : 8
1m 58.58s: Source Audio Volume : 100
1m 58.58s: Work Profile : m2ts.default
3m 30.31s: ========WorkAttr::SetSource=======
3m 30.31s: Source Title :
3m 30.31s: Source Video Codec : mpeg2
3m 30.31s: Source Video Size Original : 1920 x 800
3m 30.31s: Source Video Size Display : 1920 x 800
3m 30.31s: Source Video FPS : 24000 / 1001
3m 30.31s: Source Video Bitrate : 1200
3m 30.31s: Source Audio Codec : aac
3m 30.31s: Source Audio Bitrate : 0
3m 30.31s: Source Audio Channels : 8
3m 30.31s: Source Audio Volume : 100
3m 30.31s: Work Profile : 3d.m2ts.audiocopy.normal
3m 30.32s: ========WorkAttr::SetSource=======
3m 30.32s: Source Title :
3m 30.32s: Source Video Codec : mpeg2
3m 30.32s: Source Video Size Original : 1920 x 800
3m 30.32s: Source Video Size Display : 1920 x 800
3m 30.32s: Source Video FPS : 24000 / 1001
3m 30.32s: Source Video Bitrate : 1200
3m 30.32s: Source Audio Codec : aac
3m 30.32s: Source Audio Bitrate : 0
3m 30.32s: Source Audio Channels : 8
3m 30.32s: Source Audio Volume : 100
3m 30.32s: Work Profile : 3d.m2ts.audiocopy.normal
3m 36.87s: ========WorkAttr::SetSource=======
3m 36.87s: Source Title :
3m 36.87s: Source Video Codec : mpeg2
3m 36.87s: Source Video Size Original : 1920 x 800
3m 36.87s: Source Video Size Display : 1920 x 800
3m 36.87s: Source Video FPS : 24000 / 1001
3m 36.87s: Source Video Bitrate : 1200
3m 36.87s: Source Audio Codec : aac
3m 36.87s: Source Audio Bitrate : 0
3m 36.87s: Source Audio Channels : 8
3m 36.87s: Source Audio Volume : 100
3m 36.87s: Work Profile : 3d.m2ts.audiocopy.normal
3m 51.52s: Start check Blu-ray Ripper register status.
3m 51.52s: Use 2D to 3D mode, and this product is: Enable
3m 51.52s: End check Blu-ray Ripper register status: Enable
3m 51.53s: OPList at BD Ripper : (4113.2),(4352.1),(4608.32),(4609.32)
3m 51.53s: Blu-ray ripper check watermark flag: 1
3m 51.53s: Product 2D to 3D Converter watermark flag: 1
3m 51.53s: ------------------ convert work begin(1/1) ------------------
3m 51.53s: info: create config(bluray2video)
3m 51.53s: info: use profile(3d.m2ts.audiocopy.normal)
3m 51.53s: info: bluray playlist(0),angle(0),chapter(1->28),BDAV(no)
3m 51.53s: info: 3D working_mode(2Dto3D), 3D format(sbs_lef_right)
3m 51.56s: info: [Video]stream(4113) codec(h264) opcode(compress)
3m 51.56s: info: set output video frame_rate(24000/1001)
3m 51.56s: info: [Audio]stream(4352) codec(dca) opcode(copy) channel(8)
3m 51.56s: info: SubMode(Remux) -- Display only forced subpicture(false)
3m 51.56s: info: [Sub]stream(4608) codec(pgssub) opcode(remux) language(English)
3m 51.56s: info: [Sub]stream(4609) codec(pgssub) opcode(remux) language(English)
3m 51.57s: info: enable multi-thread software decoder
3m 51.57s: info: try to enable gpu acceleration for 2D to 3D !
3m 53.81s: info: not support gpu acceleration for 2D to 3D, try to using advance mode !
3m 53.82s: info: open 2D to 3D option(gain:10, visual_depth:254) successful !
3m 54.84s: info: h264_encode: encode param profile(2) level(41) bitrate(5488)
3m 58.86s: info: processing source(00083.m2ts)
7m 51.83s: info: processing source(00077.m2ts)
8m 05.53s: info: processing source(00079.m2ts)
291m 07.68s: info: processing source(00080.m2ts)
291m 30.22s: info: processing source(00082.m2ts)


ps have double checked and both the things below are done

2m 44.00s: DXVA GPU acceleration for video decoding enabled2m 46.11s: info: not support gpu acceleration for 2D to 3D,

Go into fab settings and under general settings put a check mark in disable all gpu also uncheck lightning recording if its checked.Then try again.

[glenns]

should be 3 things
1 uncheck lightning recording
2 put a checkmark in use all software
3 uncheck enable dxva acclertion thats it for GPU

Their one for cpu that you can adjust from max to normal.

I have this movie so if this doesn't work i can try when i have a chance i am backed up helping 2 other people and have a 3d problem of my own before i can try it.

Most 3d tv's can do this on the fly can't yours? as it's no better than my Samsung on the fly 3d simulator it adds depth but no pop out effects and that's what fabs does also.

Update to 9.0.3.5 also

[mrbasilbrush]

should be 3 things
1 uncheck lightning recording
2 put a checkmark in use all software
3 uncheck enable dxva acclertion thats it for GPU

Their one for cpu that you can adjust from max to normal.

I have this movie so if this doesn't work i can try when i have a chance i am backed up helping 2 other people and have a 3d problem of my own before i can try it.

Most 3d tv's can do this on the fly can't yours? as it's no better than my Samsung on the fly 3d simulator it adds depth but no pop out effects and that's what fabs does also.

Update to 9.0.3.5 also

one of my tv's doesn't do the on the fly 2d to 3d ..my lg does the other ones a bush and does very little on its own...still get what you pay for i suppose, i got it cheap.
sorry to be a pain could you explain where the bits are to alter i found uncheck lightning in general / codec but can't find the others

[glenns]

General-a/v codex-box on top put a check mark disable all gpu acceleration
General -preview- uncheck enable dxua acceleration
conversion-convert unckeck enable turbo cpu

[mrbasilbrush]

General-a/v codex-box on top put a check mark disable all gpu acceleration
General -preview- uncheck enable dxua acceleration
conversion-convert unckeck enable turbo cpu

many thanks, i have ticked and unticked.
i will let you know how i get on in the morning i'll leave it running overnight as late now 00.36.
thanks

[glenns]

The last file you made you said completed but the program hung at the ending did that file turn out ok?

I am making a copy War horse 3d side by side now to see if the program hangs at the end.

[mrbasilbrush]

The last file you made you said completed but the program hung at the ending did that file turn out ok?

I am making a copy War horse 3d side by side now to see if the program hangs at the end.

the one i made before that hung at the end played ok on the pc, but when i burned it with img it didn't play on blu ray player.

the new one i have just done.... this time it has gone all the way through so looking good. downside being when i played it on pc the audio was the descriptive one for people short of sight. do you know if it will have any other audio options on it before i try to burn it with img.

just to check i'm doing img correct with the mt2s blu ray files.

i go build
browse for file put it in box.
options have udf 2.5
pop disc in and away we go

[glenns]

You should only have the 7.1 hd sound track unless you checked remove hd audio or if in fabs software settings you checked remove hd audio for all movies.

The default is unchecked so hd audio will be included.So the descriptive
audio should not be included.

On your software player hit the audio button and see how many soundtracks their are on the converted movie should only be 1.

My convert will be done in a hour and a half so i will check the audio and video when done and get back to you.

[mrbasilbrush]

You should only have the 7.1 hd sound track unless you checked remove hd audio or if in fabs software settings you checked remove hd audio for all movies.

The default is unchecked so hd audio will be included.So the descriptive
audio should not be included.

On your software player hit the audio button and see how many soundtracks their are on the converted movie should only be 1.

My convert will be done in a hour and a half so i will check the audio and video when done and get back to you.

hd audio remove box is unchecked
just realised first one i did that hung has no audio

[glenns]

When you put the movie in blu ray ripper did you hit the audio tab on the top and pull down the audio tracks on that movie and change the audio from the track fab selected?Fab should have selected DTS HD 7.1 sound and that's what you should have on your movie unless you changed it.My convert will be done in 48 mins.

[mrbasilbrush]

When you put the movie in blu ray ripper did you hit the audio tab on the top and pull down the audio tracks on that movie and change the audio from the track fab selected?Fab should have selected DTS HD 7.1 sound and that's what you should have on your movie unless you changed it.My convert will be done in 48 mins.

i don't think i changed it, if i did i would have done it by accident when carrying out the ticking and unticking of the boxes in general tab etc.
can't be sure, we will know soon when yours is done.
if yours is ok and i use your exact settings.. then all should be good.
again, thanks for all your help

[glenns]

I don't mean in software settings i mean setting up the movie in ripper when you can pick a audio track ( I didn't tell you about this because i didn't want to confuse you) Go set one up now you will see the audio bar on top on the right (audio soundtrack) under audio click the box its a pull down showing all the audio tracks on the disk you highlight the one you want then its that soundtrack that fab will use.

Fab will pick the hd audio track and you don't have to do anything as that's the sound that Fab will record so you see you would have to pull the pull down box and change the sound tracks to get one that's different from the one Fab picks.So you should remember if you did this right?

You understand these files you are making are 3d data files not blu rays even if the file is very large and you put it on a blu ray disk its still a 3d data file any non 3d blu ray player should be able to play them and if you put the files on a db9 or db5 most newer regular dvd players will play them.They are hi definition 3d data files.They need a 3d tv set to side by side to put the 2 side by side pictures together to get 3d.

[mrbasilbrush]

I don't mean in software settings i mean setting up the movie in ripper when you can pick a audio track ( I didn't tell you about this because i didn't want to confuse you) Go set one up now you will see the audio bar on top on the right (audio soundtrack) under audio click the box its a pull down showing all the audio tracks on the disk you highlight the one you want then its that soundtrack that fab will use.

Fab will pick the hd audio track and you don't have to do anything as that's the sound that Fab will record so you see you would have to pull the pull down box and change the sound tracks to get one that's different from the one Fab picks.So you should remember if you did this right?

You understand these files you are making are 3d data files not blu rays even if the file is very large and you put it on a blu ray disk its still a 3d data file any non 3d blu ray player should be able to play them and if you put the files on a db9 or db5 most newer regular dvd players will play them.They are hi definition 3d data files.They need a 3d tv set to side by side to put the 2 side by side pictures together to get 3d.

it is set to 7.1 hd master i'm sure i didn't change it

[glenns]

I got 7.1 sound and so should you.Also the file made it all the way through and I used hi quality it took 8hrs 5 mins using cuda for decoding and encoding (I know you don't have cuda) the file is 15.3 gigs so its large enough so it would have to go on a blu ray if i burned it.

The picture looked washed out to me the blacks not good and the letterbox bars were not real black as should be.The 3d was not good hardly any depth at all and this movie has some real good scenes that show things near and far at the same time something 3d needs to look real good.

My Samsung 3d plasma using on the fly 3d was much better than this with deep blacks and a lot of depth.As far as I am concerned I will never use this but I did it for you so I hope you enjoy yours.I could use all software to see if the video gets better but like i said i will never use this as my tv does it much better.

[mrbasilbrush]

I got 7.1 sound and so should you.Also the file made it all the way through and I used hi quality it took 8hrs 5 mins using cuda for decoding and encoding (I know you don't have cuda) the file is 15.3 gigs so its large enough so it would have to go on a blu ray if i burned it.

The picture looked washed out to me the blacks not good and the letterbox bars were not real black as should be.The 3d was not good hardly any depth at all and this movie has some real good scenes that show things near and far at the same time something 3d needs to look real good.

My Samsung 3d plasma using on the fly 3d was much better than this with deep blacks and a lot of depth.As far as I am concerned I will never use this but I did it for you so I hope you enjoy yours.I could use all software to see if the video gets better but like i said i will never use this as my tv does it much better.

many thanks for all your help, i will burn mine to disc and play it to see how it looks. how does cuda work?

pps i have now purchased a media player that plays 3d files to make life easier

ps earlier i put how i used img for blu rays that i cant use the fab burning for, could you just have a quick look to see if these are correct.
i go build
browse for file put it in box.
options have udf 2.5
pop disc in and away we go