Running the Trial 10.0.2.1 to see if I want to purchase.

I'm running into two problems that I would like to know are either a trial version issue (and thus will go away when I purchase), or something that is the same in the paid version as well and thus a problem.

1) When converting from h.264 to h.265 using CUDA encoding on my 980 GTXs with 378.49 drivers, the process says it finishes but only about half the movie is actually in the output file. Is this because it is a trial version? It has the watermark, but I thought that was the only limitation. Here are the log entries for my most recent attempt:

------ process working ------

 0m 00.09s: info, try to open file \\diskstation\video\HD Movies\Minority.Report.2002.mkv

 0m 00.24s: info: open successed, iformat = Matroska / WebM

 0m 00.24s: info: create config(videoconvert)

 0m 00.24s: info: crop value after clone: left = 0 right= 0 top=0 bottom=0 enable=0 mode=0

 0m 00.24s: info: use profile(MKV.H265)

 0m 00.24s: info: file (.mkv)

 0m 00.24s: info: 3D working_mode(disable), 3D format(sbs_lef_right) 

 0m 00.25s: info: stream input@ Video(0)[codec(h264) size(1920*800) fps(24000/1001) interlace(0) duration(8715)sec opcode(compress)]

 0m 00.25s: info: perset file config OK ! 

 0m 00.25s: info: set output video frame_rate(24000/1001)

 0m 00.25s: info: ff bitmap index = 1 

 0m 00.25s: info: recommand= 33562680, Shrink support= 1, enable= 1, cuda_cap= 1 , cpu_count= 4

 0m 00.25s: info: vdecode hevc= 0, h264= 1, vc1= 1, mpeg2= 1, vencode h264= 6, hevc= 6 , plat = 5 

 0m 00.25s: info: stream output Video(0)[codec(hevc) size(1920*800) fps(24000/1001) interlace(0) bitrate(3683) duration(8715)sec]

 0m 00.25s: info: stream input@ Audio(1)[codec(dca) channels(6) sample(48000) bitrate(1536000) bitdepth(0) opcode(compress)]

 0m 00.26s: info: stream output Audio(1)[codec(ac3) channels(6) sample(48000) bitrate(448000) bitdepth(16) opcode(compress)]

 0m 00.26s: info: SubMode(Render) -- Display Only forced Subtitle(false) 

 4m 17.78s: UILog:MsgWork:WorkStatus_Start

 0m 00.26s: CUDA GPU acceleration for video h265 encoding enabled

 0m 00.26s: info: h265_encode: encode param profile(1) level(40) bitrate(3683) crf(-1)

 8m 15.41s: info: audio_decode finish job

 8m 15.41s: audio_encode finish job

 8m 16.69s: 

------ process exit ------

2) CUDA does not work when trying to encode 4k h.264 into h.265. It only does software and it then runs at about 4fps conversion. Is this also a trial limitation or a known problem? Here are the log entries for my 4k attempt. I aborted it about 30 seconds in:

101m 17.76s: Source manager: drag file //diskstation/video/HD Movies/The.Fifth.Element.1997.2160p.mkv

101m 17.76s: Source manager: add source id 3.

101m 17.77s: info, try to open file \\diskstation\video\HD Movies\The.Fifth.Element.1997.2160p.mkv

101m 17.97s: warning: audio info: index 1, codec_id 86061, channels 8, bitrate 0, sample_rate 48000, format 2, bit_per_sample 0, frame_size 0 

101m 17.97s: warning: audio info: index 2, codec_id 86019, channels 6, bitrate 640000, sample_rate 48000, format 8, bit_per_sample 0, frame_size 0 

101m 17.97s: warning: audio info: index 3, codec_id 86019, channels 2, bitrate 192000, sample_rate 48000, format 8, bit_per_sample 0, frame_size 0 

101m 17.97s: info: open successed, iformat = Matroska / WebM

101m 18.04s: Source manager: open successful.

101m 18.04s: Source manager: open source flag:1,0,1,1,1

101m 18.37s: Work manager: create convert work 2 with source 3 and uiinfo 4.

101m 18.37s: ========WorkAttr::SetSource=======

101m 18.37s: Source Video Size Original: 3840 x 1606 

101m 18.37s: Source Video Size Display: 3840 x 1606 

101m 18.37s: Source Video FPS: 24000 / 1001 

101m 18.37s: Source Video Bitrate: 1200 

101m 18.37s: Source Audio Bitrate: 0 

101m 18.37s: Source Audio Channels: 7 

101m 18.37s: Source Audio Volume: 100 

101m 18.37s: Work Profile: MKV.H265 

101m 38.78s: UILog: OnMsgToolbar_Start

101m 38.78s: UILog: Msg Start: ready start

101m 38.79s: UILog: Msg Start: start test run work

101m 38.79s: UILog: Msg Start: run work

101m 38.79s: UILog: Run current Work.

101m 38.80s: UILog: Begin work copy or converter.

101m 38.80s: Start check Video Converter register status.

101m 38.80s: End check Video Converter register status: Enable

101m 38.82s: UILog: start running at thread.

101m 38.83s: UILog: return flag at start running at thread ok.

101m 38.84s: OPList at BD Converter : (0.2),(1.1)

101m 38.84s: Video Converter check watermark flag: 1

101m 38.84s: ------------------  convert work begin(1/1)  ------------------ 

101m 38.84s: start process(1/1)



------ process working ------

 0m 00.09s: info, try to open file \\diskstation\video\HD Movies\The.Fifth.Element.1997.2160p.mkv

 0m 00.37s: warning: audio info: index 1, codec_id 86061, channels 8, bitrate 0, sample_rate 48000, format 2, bit_per_sample 0, frame_size 0 

 0m 00.37s: warning: audio info: index 2, codec_id 86019, channels 6, bitrate 640000, sample_rate 48000, format 8, bit_per_sample 0, frame_size 0 

 0m 00.37s: warning: audio info: index 3, codec_id 86019, channels 2, bitrate 192000, sample_rate 48000, format 8, bit_per_sample 0, frame_size 0 

 0m 00.37s: info: open successed, iformat = Matroska / WebM

 0m 00.38s: info: create config(videoconvert)

 0m 00.38s: info: crop value after clone: left = 0 right= 0 top=0 bottom=0 enable=0 mode=0

 0m 00.38s: info: use profile(MKV.H265)

 0m 00.38s: info: file (.mkv)

 0m 00.38s: info: 3D working_mode(disable), 3D format(sbs_lef_right) 

 0m 00.39s: info: stream input@ Video(0)[codec(h264) size(3840*1606) fps(24000/1001) interlace(0) duration(7588)sec opcode(compress)]

 0m 00.39s: info: perset file config OK ! 

 0m 00.39s: info: set output video frame_rate(24000/1001)

 0m 00.39s: info: ff bitmap index = 1 

 0m 00.39s: info: recommand= 33562680, Shrink support= 1, enable= 1, cuda_cap= 1 , cpu_count= 4

 0m 00.39s: info: vdecode hevc= 0, h264= 1, vc1= 1, mpeg2= 1, vencode h264= 6, hevc= 6 , plat = 5 

 0m 00.39s: info: stream output Video(0)[codec(hevc) size(3840*1608) fps(24000/1001) interlace(0) bitrate(14805) duration(7588)sec]

 0m 00.39s: info: stream input@ Audio(1)[codec(truehd) channels(8) sample(48000) bitrate(0) bitdepth(0) opcode(copy)]

 0m 00.39s: info: stream output Audio(1)[codec(truehd) channels(8) sample(48000) bitrate(0) bitdepth(0) opcode(copy)]

 0m 00.39s: info: SubMode(Render) -- Display Only forced Subtitle(false) 

101m 40.66s: UILog:MsgWork:WorkStatus_Start

 0m 00.40s: info: enable multi-thread software decoder, thread count = 4

 0m 00.40s: info: ex process path= C:/Program Files (x86)/DVDFab 10/x64/fabcore_x64.exe

 0m 00.42s: info: h265_encode: encode param profile(1) level(50) bitrate(14805) crf(-1)

102m 09.20s: UILog: OnMsgToolbar_Stop

 0m 29.59s: info: filter:filter_video_decode 

 0m 29.59s: info: fifo:93d4-filter_vtransform-0-1,block:20 

 0m 29.59s: info: filter:filter_h265_ex 

 0m 29.59s: info: fifo:93d4-filter_mux_mkvmerge-0-1,block:0 

 0m 29.59s: info: filter:filter_mux_mkvmerge 

 0m 29.60s: info: filter:filter_vtransform 

 0m 29.60s: info: fifo:93d4-filter_h265_ex-0-1,block:20 

 0m 29.60s: info: filter:filter_common_demux 

 0m 29.60s: info: fifo:93d4-filter_video_decode-0-1,block:19 

 0m 29.60s: info: fifo:93d4-filter_mux_mkvmerge-1-2,block:0 

 0m 31.16s: 

------ process exit ------

102m 12.51s: UILog: MsgWork:current work finish: 4

102m 12.51s: Source manager: open source flag:1,1,1,1,1

102m 14.25s: Source manager: open source flag:1,0,1,1,1

Thanks,

Wazoo